21 September 2020 in Journal of Lightwave Technology
A 60-GBaud intensity modulation and direct detection discrete Fourier transform spread (DFT-S) discrete multi-tone (DMT) transmission system employing low-density parity check- (LDPC-) encoded probabilistic shaping 16-ary quadrature amplitude modulation (PS-16QAM) is proposed and experimentally demonstrated. In contrast to classical probability-oriented PS schemes such as arithmetic distribution matching (ADM) and constant composition distribution matching (CCDM), the proposed one is performed based on a novel bit-weighted distribution matching (BWDM) algorithm having the advantage of simpler operations along with lower computation and hardware complexity, which merely relies on bit-class processing. As the key content of the BWDM, the bit weight intervention operation is utilized to enlarge the probability of bit `0' in the first two out of four serial binary sequences before PS-16QAM mapping. Different from the labels indicating probability distribution in ADM and CCDM, the end product of the BWDM is a group of bits mapped from input data source, which can be seamlessly compatible with the following LDPC-based forward error correction. In our experiments, system performance is respectively investigated with three LDPC code rates (3/4, 5/6, and 9/10) as well as three PS parameter values (k = 4, 5, and 7), which leads to various symbol probability distribution. Compared with standard uniformly-distributed 16QAM, up to 0.407-dB shaping gain can be achieved to approach Shannon limit in the low signal-to-noise ratio region. Moreover, the experimental results show that appreciable receiver power sensitivity improvement can be obtained by the PS-16QAM DMT based on BWDM over 2-km standard single-mode fiber for short-reach optical interconnection. Additionally, the reference-based pre-equalization is equipped to compensate for the high frequency loss by ultra-wide signal bandwidth.
2 March 2020 in IEEE Access
A 5 × 60 Gb/s low-density parity-check (LDPC) coded WDM-PON using 8-level pulse amplitude modulation (PAM8) signals with probabilistic shaping (PS) over 20-km standard single-mode fiber (SSMF) with direct detection is proposed and experimentally demonstrated. Each optical carrier at the optical line terminal (OLT) carries a 20-Gbaud probabilistically-shaped LDPC-coded PS-PAM8 signal from a conventional uniform PAM16 signal following a designed approximate Gaussian distribution (AGD). A LDPC-based bit-interleaved coded modulation scheme with iterative decoding (BICM-ID) is utilized to recover the inherently overlapped symbols due to the proposed PS mapping. Combining decision-directed least-mean-squares (DD-LMS) and constant modulus algorithm (CMA), a blind feedback pre-equalizer is adopted to reduce the frequency loss of the signal owing to imperfect electro-optical components in experiment. As for experimental verification and application, 1.48-dB superior receiver power sensitivity and 1.7-dB launch fiber power optimization are gained respectively by using LDPC-coded PS-PAM8 signals in WDM-PON, which can bring higher spectral efficiency and power loss budget for the optical distribution networks.
11 March 2025 in Journal of Lightwave Technology
The Terahertz (THz) band as an underdeveloped frequency range, possesses a significant bandwidth and holds great potential for valuable applications. Photonics-aided THz wireless transmission techniques that can generate and detect broadband signal have bright application prospects in the future. While the larger bandwidth usually refers to higher sampling rates of digital-to-analog converter (DAC) and analog-to-digital converter (ADC), which are more difficult to keep the actual sampling frequency align with the nominal frequency. The sampling frequency offset (SFO) between DAC and ADC in the transceiver will seriously degrade the performance of these asynchronous optical communication systems. The SFO-induced impairments and their compensation methods have been widely studied in optical multi-carrier systems, while rarely investigated in signal-carrier systems. In this paper, we successfully realize a 60-GBaud 64-QAM THz-wave signal delivery at 322 GHz in a 2×2 MIMO dual-polarization system, with 20-km wired and 3-m wireless distance, achieving a record-breaking single-wavelength net rate of 562.5 Gbps. To achieve this, digital signal processing (DSP) based digital-interpolation (DI) SFO method and other advanced DSP methods are applied. The SFO between DAC and ADC in the transceiver reaching up to $\sim$20 parts per million (ppm) in nominal case can be compensated to as if case with SFO of $< $ 0.2 ppm and satisfy the bit error rate (BER) threshold. To the best of our knowledge, this currently represents the highest achievable single-lane net rate in short-range single-wavelength THz wireless transmission systems.
12 May 2025 in Journal of Lightwave Technology
In the field of passive optical networks (PONs), coherent sinking has emerged as a significant topic, particularly in the context of cost and complexity improvements. We experimentally demonstrate a cost-effective 100-/200-Gbits/s/λ coherent PON system employing dual-polarization quadrature phase shift keying (DP-QPSK) and 16-ary quadrature amplitude modulation (DP-16QAM). To achieve cost reductions in coherent PON implementations, we employ low-cost distributed feedback lasers (DFBs) as the sole active light sources, replacing the much more expensive external cavity lasers (ECLs) at both the optical line terminal (OLT) and the optical network units (ONUs). To effectively address the performance penalty associated with phase noise (PN) of DFBs characterized by MHz-class linewidths, a straightforward carrier phase recovery (CPR) is proposed via embedding a one-tap carrier phase estimator (CPE) with gradient-descent algorithm into a 4 × 4 multiple-input multiple-output (MIMO) equalizer following the least-mean square algorithm (LMS). This approach simplifies the structure and enables more precise cancellation of PN. We conduct a transmission performance comparison at 32 Gbaud between our proposed scheme and the blind phase searching algorithm (BPS) for single-carrier (SC) signals, as well as between our method and the frequency-domain pilot-tone carrier phase recovery (FPT-CPR) for two-sub-band digital subcarrier multiplexing (DScM) signals. Experimental results demonstrate the corresponding power budgets of 38.1, 30.8, 36.5, and 29.1 dB for SC-QPSK/16QAM and DScM-QPSK/16QAM at the 20% soft-decision forward error correction (SD-FEC) threshold of 2 × 10-2. Furthermore, complexity analysis of these phase noise estimation (PNE) methods reveals the superiority of our proposed scheme in balancing performance and computational complexity.
3 April 2020 in Journal of Lightwave Technology
In this paper, a 5 × 25-GBaud wavelength division multiplexing passive optical network (WDM-PON) is reported and experimentally demonstrated with each channel carrying a low-density parity check- (LDPC-) coded probabilistic shaping 4-ary pulse amplitude modulated signal (PS-PAM4). In such a splitter-based WDM-PON system, 8-point 3-bits/symbol PAM8 is mapped into 4-point PAM4 by adoption of a many-to-one mapping scheme, which enables improved receiver power sensitivity and increased spectral efficiency, compared with uniformly-distributed PAM4. Different from the typical constant composition distribution matching method for PS, no shaping codes or PS overheads are needed in our PS-PAM4 signal which is to be encoded and decoded in a LDPC-based bit-interleaved coded modulation iterative decoding (BICM-ID) system for the compatibility with the forward error correction (FEC) applied in most of the optical transponders currently. In the BICM-ID system, the extrinsic messages are delivered circularly between the PS de-mapper and the LDPC decoder to deal with PS many-to-one mapping ambiguity. The experimental results strive to make the WDM-PON system better spectrum efficiency, as well as superior receiver power sensitivity and fiber nonlinear effect tolerance, thus maximizing the input power at the optical line terminal and economic efficiency of the system due to ampler loss budget provided for the legacy optical distribution networks.
21 October 2019 in Journal of Lightwave Technology