Yuji Ohishi

Yuji Ohishi

Auto-generated profile, based on publicly available information

Yuji Ohishi

The University of Osaka

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2019 in Heliyon
Verified
Journal Article
Open access
TKToshiki Kondo
Toshiki Kondo
HMHiroaki Muta
Hiroaki Muta
KKKen Kurosaki
Ken Kurosaki
FKFlorian Kargl
Florian Kargl
AYAkifumi Yamaji
Akifumi Yamaji
YOYuji Ohishi
Yuji Ohishi
Liquid ZrO2 is one of the most important materials involved in severe accident analysis of a light-water reactor. Despite its importance, the physical properties of liquid ZrO2 are scarcely reported. In particular, there are no experimental reports on the viscosity of liquid ZrO2. This is mainly due to the technical difficulties involved in the measurement of thermo-physical properties of liquid ZrO2, which has an extremely high melting point. To address this problem, an aerodynamic levitation technique was used in this study. The density of liquid ZrO2 was calculated from its mass and volume, estimated based on the recorded image of the sample. The viscosity was measured by a droplet oscillation technique. The density and viscosity of liquid ZrO2 at temperatures ranging from 2753 K to 3273 K, and 3170 K-3471 K, respectively, were successfully evaluated. The density of liquid ZrO2 was found to be 4.7 g/cm 3 at its melting point of 2988 K and decreased linearly with increasing temperature, and the viscosity of liquid ZrO2 was 13 mPa at its melting point.

3 August 2017 in Journal of Nuclear Science and Technology
Verified
Journal Article
Closed access
FNFumihiro Nakamori
Fumihiro Nakamori
YOYuji Ohishi
Yuji Ohishi
HMHiroaki Muta
Hiroaki Muta
KKKen Kurosaki
Ken Kurosaki
KFKen-Ichi Fukumoto
Ken-Ichi Fukumoto
SYShinsuke Yamanaka
Shinsuke Yamanaka
In order to conduct defueling operations for the decommissioning of the reactor at the Fukushima Daiichi nuclear power plant, an understanding of the physical properties of ZrSiO4 is of extreme importance. ZrSiO4 appears to have formed in the molten core–concrete interaction products at the Fukushima Daiichi nuclear disaster site through a reaction between Zircaloy cladding materials and concrete. Since ZrSiO4 has a high melting point of 2550 K, together with chemical inertness, the material has been widely studied as a refractory material. Various studies on the physical properties of ZrSiO4 have been performed; however, significant differences exist in the data, possibly due to the porosity within the studied samples. In the present study, we have prepared a ZrSiO4 bulk sample with 97.4% of the theoretical density by spark plasma sintering of the ZrSiO4 powder and heat treatment. We have evaluated the thermal and mechanical properties of ZrSiO4 by the measurement of sound velocities, thermal diffusivity, Vickers hardness, and fracture toughness. The Vickers hardness and fracture toughness were found to be 17 ± 3 GPa and 2.1 ± 0.5 MPa m1/2, respectively.

1 June 2018 in Journal of Nuclear Science and Technology
Verified
Journal Article
Closed access
AMAfiqa Mohamad
Afiqa Mohamad
YOYuji Ohishi
Yuji Ohishi
HMHiroaki Muta
Hiroaki Muta
KKKen Kurosaki
Ken Kurosaki
SYShinsuke Yamanaka
Shinsuke Yamanaka
U3Si2 has been explored as an alternative nuclear fuel material for increased accident tolerance. However, scatter has been reported in the thermal properties possibly because of the pores and impurities within the samples. In the present study, we prepared a polycrystalline U3Si2 bulk sample with high density and without impurity, and evaluated its thermal and mechanical properties. The sample was synthesized by arc melting and spark plasma sintering, followed by annealing. The density of the U3Si2 pellet was 96% of the theoretical density. The heat capacity was measured and compared with the calculation data. In addition, the measured data were used to evaluate thermal conductivity of U3Si2. The measurement data of elastic properties were compared with the theoretical calculation and agreed well. A high thermal conductivity and hardness compare to UO2make it favorable to anticipated as alternative nuclear fuel.

1 January 2012 in MATERIALS TRANSACTIONS
Verified
Journal Article
Closed access
PDF file
TPTheerayuth Plirdpring
Theerayuth Plirdpring
KKKen Kurosaki
Ken Kurosaki
AKAtsuko Kosuga
Atsuko Kosuga
MIManabu Ishimaru
Manabu Ishimaru
AHAdul Harnwunggmoung
Adul Harnwunggmoung
SYShinsuke Yamanaka
Shinsuke Yamanaka
The Cu–Ga–Te ternary compounds: Cu3Ga5Te9, Cu2Ga4Te7, CuGa3Te5, CuGa5Te8, and CuGaTe2 have zinc-blende or chalcopyrite structure. The compounds except for CuGaTe2 contain vacancies in the cation site due to the valence mismatch between cation and anion, and the vacancy concentration is different between these compounds. Here we investigated the effect of the amount of vacancies on the thermoelectric (TE) properties of the Cu–Ga–Te ternary compounds. At room temperature, the presence of vacancies reduced the Hall mobility (μH) and the lattice thermal conductivity (κlat), showing that the vacancies scattered both carriers and phonons. It was found that the decreasing rate of the μH was larger than that of the κlat. Therefore, the presence of vacancies degraded the TE performance of the Cu–Ga–Te ternary compounds. In other words, CuGaTe2 without vacancies would show the best TE figure of merit. The room temperature ZT values for Cu3Ga5Te9, Cu2Ga4Te7, CuGa3Te5, CuGa5Te8, and CuGaTe2 were 2.0 × 10−2, 2.4 × 10−2, 8.9 × 10−3, 1.3 × 10−2, and 5.6 × 10−3, respectively.

18 August 2017 in Journal of the American Ceramic Society
Verified
Journal Article
Open access
PDF file
KOKyung Min Ok
Kyung Min Ok
YOYuji Ohishi
Yuji Ohishi
HMHiroaki Muta
Hiroaki Muta
KKKen Kurosaki
Ken Kurosaki
SYShinsuke Yamanaka
Shinsuke Yamanaka
In this study, we have investigated the effect of planar defect on thermal and electron transport as compared to point defect in the rutile TiO2−x. Two series of bulk TiO2−x(2−x = 2.000, 1.992, 1.985, 1.972, and 1.934) samples were prepared using different heat‐treatment procedures to clearly identify the presence of point and planar defects via powder X‐ray diffraction. The charge carrier density and mobility were determined from the Hall effect measurements using the van der Pauw method. The elastic properties of the studied materials such as bulk modulus, shear modulus, Young's modulus, compressibility, and Debye temperature were evaluated from the measured sound velocities, while their thermal conductivities were determined from the thermal diffusivities, heat capacities, and densities measured in the temperature range between 300 and 1073 K. The theoretical calculation based on Klemens‐Callaway model has been performed to analyze the thermal conductivity. As a result, the effect of planar defects on the carrier mobility was almost equivalent to the effect produced by point defects. On the other hand, the presence of planar defects significantly reduced the thermal conductivity of TiO2−xas compared to point defect due to strong phonon scattering induced by planar defects.

1 October 2017 in Intermetallics
Verified
Journal Article
Closed access
YSYasutaka Shiota
Yasutaka Shiota
HMHiroaki Muta
Hiroaki Muta
KYKunio Yamamoto
Kunio Yamamoto
YOYuji Ohishi
Yuji Ohishi
KKKen Kurosaki
Ken Kurosaki
SYShinsuke Yamanaka
Shinsuke Yamanaka