12 June 2018 in IOP Conference Series: Materials Science and Engineering
Wide distribution of gypsum materials and products, that contributes mainly to their good consumer properties and capacity of forming the most comfortable environment requires the increase in their technical parameters, mainly of mechanical and operational ones. Modern studies of gypsum bindings focus mostly on higher strength, water resistance, lower density and longer life. Existing method of improving the properties of gypsum bindings consists in wide use of mineral and organic modifiers capable of influencing various formation layers of gypsum stone structure. Multilayer reinforcement of composites can form the structure for modified stone of enhanced crack resistance. Reinforcement at atomic-molecular level is the most attractive, as most of known methods of modification with carbonic fullerenes complicate the technology, increase labor and energy expenditures, and, as a result, the price of articles. Reinforced dihydrate calcium sulphate contributes to stronger structure of composite high-strength bindings and improving their mechanical properties, which is achievable through the use of a mineral modifying complex and selecting of a grain composition. Studies were made to understand how reinforcing mineral complex influences physical-mechanical properties of gypsum composite. It should be mentioned that samples based on gypsum binary mixture of optimum granulometry with an additive are stronger than gypsum mixes without additives. Use of mineral modifier contributes to changing in crystal morphology and forming stronger structure of gypsum stone, and this is confirmed by microstructural analysis of reinforced composite. Results obtained prove that modified gypsum composites may be used in making gypsum materials and articles of high strength.
30 April 2016 in Glass and Ceramics
6 December 2023 in Bulletin of Belgorod State Technological University named after. V. G. Shukhov
The production of Portland cement is associated with a high consumption of mineral raw materials and significant emissions of carbon dioxide into the atmosphere. Therefore, the partial replacement of cement with technogenic mineral additive in cement compositions is a rational way of utilizing production waste. Besides, the use of industrial waste products as mineral additives allows solving environment problems and reducing the consumption of primary natural resources. This paper presents the study on the hydraulic activity of thermally activated expanded clay dust used as an active mineral additive in cement compositions. Expanded clay dust is an industrial waste formed during the production of ceramsite gravel, and captured in the dust cleaning systems of kilns: dust chambers, cyclones, filters. A comprehensive study of the composition, containing expanded clay dust and water, was carried out using the IR spectral analysis, differential scanning calorimetry and scanning electron microscopy with X-ray microanalysis. It was established that the strength of baked samples increased by 80% after immersion in water. The main hydration products of baked expanded clay dust are three types of compounds - fibrous crystals of calcium hydrosulfoaluminate, calcium hydroaluminates in the form of cruciform twins, amorphized spherulite-like formations based on low-base calcium silicate hydrates.
9 April 2025 in Construction Materials
In modern architectural and design solutions for buildings appearance formation facades external finishing with fine-grained concrete (FGC) based on composite gypsum binders (CGB) continues to gain popularity instead of traditionally used Portland cement. These materials have significant advantages in regulating their setting time and hardening speed. At the same time it is necessary that FGC based on CGB provide increased strength, water resistance and frost resistance, and their surface has water-repellent (hydrophobic) properties. The article presents the results of experimental studies of the physical and mechanical characteristics of the developed fine-grained concretes based on composite gypsum binders with a mineral additive of highly active metakaolin VMK-45 and a complex of organic additives – SP Melflux 1641F + RPP Vinnapas 8034H. The results of performed studies allow us to assert that the developed water-resistant and frost-resistant MZB based on KGV class B22.5 with a hydrophobic surface can be used for external finishing of buildings and structures facades. The water-repellent properties of the hardened MZB surface are manifested mainly due to the use of a chemical additives complex, which action principle is based on combination of electrostatic and steric repulsion, effect achieving with the help of lateral hydrophobic polyester chains of molecules, creating a protective hydrophobic film.
28 November 2016 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry