The objective of this study was to evaluate the accuracy of nondestructive variables in inferring basic density of wood from Eucalyptus grandis and Eucalyptus urophylla. A total of 27 clones of Eucalyptus urophylla and 22 clones of Eucalyptus grandis were used, sourced from a clonal trial set up in Martinho Campos, Minas Gerais. After evaluation using nondestructive techniques of resistography and pin penetration at a constant pressure (Pilodyn®), individuals were felled and disks were removed from the 2%, 10%, 30%, 50% and 70% portions of the merchantable height section, and also from the portion 1.30 m above ground level. Basic density was determined by the water immersion method. Values of basic density ranged from 0.412 to 0.609 g.cm-3 for clones at age 42 months and from 0.408 to 0.664 g.cm-3 for clones at age 54 months. The clones of Eucalyptus urophylla provided higher values of average basic density in relation to Eucalyptus grandis. The variable 'amplitude' had better correlation with basic density in comparison with pin penetration at a constant pressure. Nondestructive evaluation can be used in mass preselection of genetic materials, prior to subjecting them to a more accurate, reliable evaluation.
A análise de correlação canônica é um procedimento estatístico multivariado que permite verificar as correlações lineares existentes entre dois grupos ou conjuntos de variáveis (X e Y). No presente trabalho, objetivou-se realizar a análise de correlação canônica para verificar as associações existentes entre o grupo formado pelos teores de lignina, extrativos totais e o poder calorífico superior (PCS) de resíduos lignocelulósicos com o grupo formado pelos teores de seus componentes elementares (carbono, hidrogênio, nitrogênio e enxofre). Foram utilizados oito resíduos lignocelulósicos: maravalhas de eucalipto, pinus e cedro australiano; bagaço de cana; polpa celulósica residual de bambu; casca e pergaminho de café; resíduos da colheita do milho e casca de arroz. Apenas a primeira função canônica mostrou-se significativa, entretanto apresentou baixo R² canônico. Encontrou-se uma tendência de altos teores de carbono, hidrogênio e enxofre e baixos teores de nitrogênio estarem associados com altos teores de extrativos totais dos resíduos lignocelulósicos avaliados. Esses resultados preliminares mostram que as correlações canônicas não foram eficientes para explicar as correlações existentes entre os componentes químicos elementares e os teores de lignina e o poder calorífico superior.
This research aimed to select Eucalyptus clones for bioenergy production by using of two multivariate techniques, principal component analysis and cluster analysis. The analysis evaluated 25 clones of Eucalyptus at age 54 months. Determinations included the concentrations of elemental components (C, H and O), lignin, total extractives and ash, as well as basic density, higher heating value and energy density. Both multivariate methods being used to evaluate and select clones of Eucalyptus for bioenergy production proved effective, there being similarities between the biomass groups formed by them. The cluster analysis revealed five distinct groupings, out of which cluster one, formed by clone U060, was found to have greater potential as a source of energy. Clones G084, G122, G023 and U108 had poorer energy performance.
The objective of this work was to evaluate the carbonization yield of babassu nutshell as affected by final temperature, as well as the energy losses involved in the process. Three layers constituting the babassu nut, that is, the epicarp, mesocarp and endocarp, were used together. The material was carbonized, considering the following final temperatures: 450, 550, 650, 750, and 850ºC. The following were evaluated: energy and charcoal yields, pyroligneous liquid, non-condensable gases, and fixed carbon. The use of babassu nutshell can be highly feasible for charcoal production. The yield of charcoal from babassu nutshell carbonization was higher than that reported in the literature for Eucalyptus wood carbonization, considering the final temperature of 450ºC. Charcoal and energy yields decreased more sharply at lower temperatures, with a tendency to stabilize at higher temperatures. The energy yields obtained can be considered satisfactory, with losses between 45 and 52% (based on higher heating value) and between 43 and 49% (based on lower heating value) at temperatures ranging from 450 to 850ºC, respectively. Yields in fixed carbon and pyroligneous liquid are not affected by the final carbonization temperature.