Ahmed Abdelrahman Elshami

Ahmed Abdelrahman Elshami

Auto-generated profile, based on publicly available information

Ahmed Abdelrahman Elshami

Housing & Building National Research Centre, Dokki, Giza 12611, Egypt

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2022 in Journal of Sustainable Cement-Based Materials
Verified
Journal Article
Closed access
Seleem S.E AhmadSeleem S.E Ahmad
Seleem S.E Ahmad
MEMohamed Ahmed Refat El-Mahdy
Mohamed Ahmed Refat El-Mahdy
AEA.A Elshami
A.A Elshami
EYEl-Shikh M. Yousry
El-Shikh M. Yousry
Self-healing concrete is an advanced, sustainable technique that has the potential to reduce maintenance costs by automatically repairing cracks. Some Bacillus species produce a urease enzyme to precipitate calcite during biomineralization, which can act as a binding filling material. This study investigated the effects of bacteria type, content and concentration, and nutrient content on the properties of self-healing concrete, especially at the age of 90 days. Bacillus Sphaericus and Bacillus Megaterium were introduced into the concrete at two concentrations, 2 × 108 and 2 × 109 (CFU/ml), and different percentages of bacteria were selected using calcium lactate as a nutrient material. Tests were performed for compressive strength, SEM, EDS, water permeability, rapid chloride permeability, and TGA/DTG. The results show significant development in compressive strength and microstructure characterization of concrete, especially with Bacillus Megaterium using a 2.5% bacterial proportion with a concentration of 2 × 109 CFU/ml and 1% of calcium lactate.

31 May 2023 in Buildings
Verified
Journal Article
Open access
PDF file
AEAhmed M Elkerany
Ahmed M Elkerany
Mostafa Mohamed KeshtaMostafa Mohamed Keshta
Mostafa Mohamed Keshta
MEMohamed M. Yousry Elshikh
Mohamed M. Yousry Elshikh
AEAhmed A. Elshami
Ahmed A. Elshami
Osama YoussfOsama Youssf
Osama Youssf
In this study, fourteen sustainable concrete mixes containing metakaolin (MK) as supplementary cement material (SCM) and magnetized water (MW) as concrete mixing water were designed, prepared, tested, analyzed, and compared. The MK was used as a partial replacement of cement weight by 5%, 10%, and 20%, and as an additive to cement by 5%, 10%, and 20% of cement weight. The MW was used to fully replace tap water (TW) in concrete mixes and was prepared using two different magnetic fields of 1.4 tesla (T) and 1.6 T. This experimental research aimed to assess the characteristics of concrete manufactured with MK and MW. The mechanical and durability characteristics of fresh and hardened concrete were measured for the assessment. Microstructural and chemical analyses were carried out on selected materials and concrete mixes. The workability and compressive strength of the materials at 7, 28, and 365 days were measured, in addition to the splitting tensile strength at 28 days and the flexural strength at 28 days. The compressive strength at 365 days was conducted at 18 °C and 100 °C to study the effect of the applied variables on the concrete durability at different elevated temperatures. The microstructural and chemical analyses were conducted using a scanning electron microscope (SEM), energy dispersive X-ray (EDX), and Fourier transform infrared (FTIR) spectroscopy. The results showed that using 10% MK as a cement additive was the best ratio in this study, which enhanced all the measured mechanical characteristics when the TW or MW was used. Using MW instead of TW in MK concrete increased all the mechanical properties measured at 28 days by about 32–35%. The results of the microstructural and chemical analyses supported the compressive strength increase by showing indications of more C-S-H gel production and less CH when using MW in MK concrete. In addition, fewer micro-cracks and pores, and relatively denser concrete, were detected when using MW with 10% MK as a cement additive.

26 November 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
SKSarah A. Khattab
Sarah A. Khattab
MEMohamed M. Yousry Elshikh
Mohamed M. Yousry Elshikh
WEWalid Elmetwaly Elemam
Walid Elmetwaly Elemam
AEAhmed A. Elshami
Ahmed A. Elshami
Osama YoussfOsama Youssf
Osama Youssf
One of the most important challenges in developing the concrete industry is to use sustainable materials that are able to improve concrete properties. Magnetized water (MW) is a type of water that can replace tap water (TW) in conventional concrete and enhance its mechanical properties. However, the performance of MW in geopolymer concrete has not been well investigated up to now. The goal of this study is to measure the effect of using an alkaline activator (AA) made of MW on the mechanical properties and durability of fly ash (FA)-based geopolymer concrete. The AA was a mixture of sodium hydroxide (SH) solution and sodium silicate (SS) solution. Eighteen geopolymer concrete mixes were tested for several fresh, hardened, and durability properties. Of these mixes, nine were prepared with AA made of MW and the other nine were the same but prepared with AA made of TW. The preparation of MW was simply carried out by passing TW across permanent magnets of 1.6 Tesla, and then 1.4 Tesla intensities for 150 cycles. The MW-based AA properties were analyzed and compared to those of the conventional TW-based AA. Several mechanical and durability properties were measured. Scanning electronic microscopy (SEM) analysis was also conducted on selected mixes. The outcomes of the hardened concrete tests demonstrated that while using MW to prepare AA solution contained SH with a molarity of 16 M, an SS/SH ratio of 2, an AA/C ratio of 0.4, a W/C ratio of 10%, and a curing temperature of 115 °C could display the best outcomes in this study when used in geopolymer concrete. Using MW in a geopolymer concrete AA could increase its slump by up to 100% compared to that made of TW. Using MW in the AA enhanced the compressive strength by up to 193%, 192%, and 124% after 7, 28, and 56 days, respectively. The SEM analysis showed that using MW clearly enhanced the surface morphology of geopolymer concrete. The proposed geopolymer concrete made using the MW-based AA in this study sheds the light on a new class of eco-friendly concrete that could possibly be used in many structural applications.

25 October 2021 in Innovative Infrastructure Solutions
Verified
Journal Article
Closed access
PDF file
IRIslam M. Riad
Islam M. Riad
AEAhmed A. Elshami
Ahmed A. Elshami
MEMohamed M. Yousry Elshikh
Mohamed M. Yousry Elshikh

19 June 2022 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
AEA.A. Elshami
A.A. Elshami
NENoura Essam
Noura Essam
EYEl-Shikh M. Yousry
El-Shikh M. Yousry
Magnetized water (MW) is one of the most effective and economical ways to improve the properties of self-compacting concrete (SCC). Therefore, the aim of this study is to improve the fresh, mechanical, and microstructural properties of SCC using MW. For this purpose, a total of 12 mixes were produced with silica fume (SF) content (5% and 10% by weight of cement), and the mixing water passed through a permanent magnetic field (with a strength of 1.4 T) for 50, 100, and 150 cycles. Tests were performed for fresh properties (Slump flow, T50cm, V-funnel, and L-box), for mechanical properties (compressive, flexural, and tensile strength), and for microstructure properties (SEM, EDX, and TGA/DTG). The optimum result in compressive strength was achieved in the mix M8 using 5% silica fume and 150 cycles of MW. For fresh properties, the mix M4 using 150 cycles without SF had the workability enhanced by 11% compared to the control mix, and SEM and EDX tests indicated that SCC mixes prepared with MW had more C-S-H, less CH, and were denser. In addition, TGA/DTG analysis showed that the rate of hydration of mix M8 was reached by 61% at 28 days.

21 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
AFAmal Fawzy
Amal Fawzy
AEAhmed Elshami
Ahmed Elshami
Seleem S.E AhmadSeleem S.E Ahmad
Seleem S.E Ahmad
In this work, the effects of recycled concrete aggregate, modified with mineral admixtures and nanosilica, on the mechanical properties and performance of concrete after curing in tap water for 28 and 90 days were investigated. The compressive (ƒc), indirect tensile (ƒt), and flexural (ƒb) strengths for the cured concrete specimens were measured, and the concrete strength ratios were analyzed. The water and rapid chloride permeabilities were measured. SEM analysis of the microstructure was also performed. The coarse aggregates used were dolomite (control) and recycled concrete aggregate, incorporating different mineral admixtures, including ground, granulated blast slag, granite, and nanosilica. It was found that the slump values of the dolomite concrete decreased compared with recycled aggregate concrete. Compared to the control mix produced with the recycled aggregate, the slump value of the concrete mixes created with the recycled aggregate increased by approximately 11.1% with the addition of binary cementing materials of 1% NS. The results also indicate that the concrete mix containing the recycled aggregate had the highest compressive strength, tensile strength, and flexural strength compared to that of the dolomite aggregate. Regarding the compressive strength, the addition of 1% NS and 15% slag improved the physico-mechanical properties of the recycled aggregate concretes compared to the other mixes after curing in tap water. Compared to the other mixes, the concrete mix containing 1% NS and 15% slag had a comparatively dense and compact microstructure.