To accelerate the deployment of hydrogen produced by renewable solar energy, several technologies have been competitively developed, including photoelectrochemical (PEC), photocatalytic, and photovoltaic-electrolysis routes. In this review, we place PEC in context with these competing technologies and highlight key advantages of PEC systems. After defining the unique performance metrics of the PEC water splitting system, recently developed strategies for enhancing each performance metric, such as the photocurrent density, photovoltage, fill factor, and stability are surveyed in conjunction with the relevant theoretical aspects. In addition, various advanced characterization methods are discussed, including recently developed in situ techniques, allowing us to understand not only the basic properties of materials but also diverse photophysical phenomena underlying the PEC system. Based on the insights gained from these advanced characterization techniques, we not only provide a resource for researchers in the field as well as those who want to join the field, but also offer an outlook of how thin film-based PEC studies could lead to commercially viable water splitting systems.
Determining cost-effective semiconductors exhibiting desirable properties for commercial photoelectrochemical water splitting remains a challenge. Herein, we report a Sb2Se3 semiconductor that satisfies most requirements for an ideal high-performance photoelectrode, including a small band gap and favourable cost, optoelectronic properties, processability, and photocorrosion stability. Strong anisotropy, a major issue for Sb2Se3, is resolved by suppressing growth kinetics via close space sublimation to obtain high-quality compact thin films with favourable crystallographic orientation. The Sb2Se3 photocathode exhibits a high photocurrent density of almost 30 mA cm−2 at 0 V against the reversible hydrogen electrode, the highest value so far. We demonstrate unassisted solar overall water splitting by combining the optimised Sb2Se3 photocathode with a BiVO4 photoanode, achieving a solar-to-hydrogen efficiency of 1.5% with stability over 10 h under simulated 1 sun conditions employing a broad range of solar fluxes. Low-cost Sb2Se3 can thus be an attractive breakthrough material for commercial solar fuel production.
Copper nanowire (CuNW)-network film is a promising alternative to the conventional indium tin oxide (ITO) as a transparent conductor. However, thermal instability and the ease of oxidation hinder the practical applications of CuNW films. We present oxidation-resistive CuNW-based composite electrodes that are highly transparent, conductive and flexible. Lactic acid treatment effectively removes both the organic capping molecule and the surface oxide/hydroxide from the CuNWs, allowing direct contact between the nanowires. This chemical approach enables the fabrication of transparent electrodes with excellent properties (19.8 Ω sq−1 and 88.7% at 550 nm) at room temperature without any atmospheric control. Furthermore, the embedded structure of CuNWs with Al-doped ZnO (AZO) dramatically improves the thermal stability and oxidation resistance of CuNWs. These AZO/CuNW/AZO composite electrodes exhibit high transparency (83.9% at 550 nm) and low sheet resistance (35.9 Ω sq−1), maintaining these properties even with a bending number of 1280 under a bending radius of 2.5 mm. When implemented in a Cu(In1−x,Gax)(S,Se)2 thin-film solar cell, this composite electrode demonstrated substantial potential as a low-cost (Ag-, In-free), high performance transparent electrode, comparable to a conventional sputtered ITO-based solar cell.
Recent advances in unconventional foldable and stretchable electronics have forged a new field in electronics. However, traditional conducting metal oxides and metal thin films are inappropriate as electrodes for stretchable devices because they are vulnerable to tensile strain as well as bending strain. In this study, we describe the fabrication of annealing-free, copper nanowire (CuNW)-based stretchable electrodes using an inexpensive metal source through a simple and scalable process at low temperature without a vacuum. We also introduce a reversible and extremely stretchable (up to 700% of strain) helical, CuNW-based conducting spring, which has not been previously used for stretchable electrodes.
Solution processing of earth-abundant Cu2ZnSn(S1-x,Sex)4 (CZTSSe) absorber materials is an attractive research area in the economical and large-scale deployment of photovoltaics. Here, a band-gap-graded CZTSSe thin-film solar cell with 7.1% efficiency was developed using non-toxic solvent-based ink without the involvement of complex particle synthesis, highly toxic solvents, or organic additives. Despite the high series resistance due to the presence of a thick Mo(S,Se)x layer and Zn(S,Se) aggregates, a high short-circuit current density (JSC) was generated. In addition, there was no significant difference in open circuit voltages (VOC) between CZTS (0.517 V) and CZTSSe (0.505–0.479 V) cells, despite a significant band gap change from 1.51 eV to 1.24 eV. The high JSC and less loss of VOC are attributed to the effect of band gap grading induced by Se grading in the CZTSSe absorber layer. Our environmentally benign ink approach will enable the realization of low-cost, large-area, high-efficiency thin-film solar cells.
Although high dielectric constant (k) oxide thin film has been considered as a key element for high performance and low-voltage driven thin-film transistors (TFTs), there are no solution processable high-k oxide dielectrics that satisfy the stringent requirements of low-temperature processability, mechanical flexibility, and good TFT performance. Here, we demonstrate that the incorporation of a zirconium component that has strong bonding to oxygen enables a significant reduction in the processing temperature for soluble alumina dielectrics to as low as 250 °C. Based on these Zr-AlOx films, high performance, low operational voltage, flexible TFTs are achieved. Flexible TFTs operate well under a gate bias of 5 V, exhibiting a high saturation mobility of 51 cm2 V−1 s−1, an on/off current ratio of 104, and a low threshold voltage of 1.2 V with good mechanical flexibility. This is the first study demonstrating the mechanical flexibility of all-oxide soluble high-k dielectric–semiconductor-based TFTs with an emphasis on the influence of annealing temperature on the solution-deposited high-k oxide dielectric characteristics.