7 April 2016 in Journal of Materials Chemistry A
Nitrogen-doped hierarchical porous carbon for a supercapacitor electrode was prepared from shrimp shell using its intrinsic mineral scaffold (CaCO3) as the self-template combined with KOH activation.
1 November 2018 in Carbon
5 February 2013 in Nanoscale
A highly atom-economic procedure for the preparation of reduced graphene oxide/Mn3O4 (rGO/Mn3O4) composites is reported. Pristine graphene oxide/manganese sulfate (GO/MnSO4) suspension produced by modified Hummers method is utilized with high efficiency, which has been in situ converted into GO/Mn3O4 hybrid composite by air oxidation, then into rGO/Mn3O4 composite by means of dielectric barrier discharge (DBD) plasma-assisted deoxygenation. The Mn3O4 content of the rGO/Mn3O4 composites can be readily tailored. It is observed that Mn3O4 nanoparticles of 15–24 nm are well-dispersed on graphene sheets with Mn3O4 loading as high as 90%. The specific capacitance of the as-prepared rGO/Mn3O4 hybrids with 90% Mn3O4 reaches 193 F g−1 when employed as the electrode material in neutral Na2SO4 electrolyte solutions (76 F g−1 for pristine graphene and 95 F g−1 for pure Mn3O4), which indicates the positive synergetic effects from both graphene and attached Mn3O4. The method developed in this study should offer a new technique for the large scale and highly atom-economic production of graphene/MnOx composites for many applications.
12 October 2020 in Advanced Science
Electrochemical nitrogen reduction reaction (NRR) provides a facile and sustainable strategy to produce ammonia (NH3) at ambient conditions. However, the low NH3 yield and Faradaic efficiency (FE) are still the main challenges due to the competitive hydrogen evolution reaction (HER). Herein, a three‐phase electrocatalyst through in situ fabrication of Au nanoparticles (NPs) located on hydrophobic carbon fiber paper (Au/o‐CFP) is designed. The hydrophobic CFP surface facilitates efficient three‐phase contact points (TPCPs) for N2 (gas), electrolyte (liquid), and Au NPs (solid). Thus, concentrated N2 molecules can contact the electrocatalyst surface directly, inhibiting the HER since the lowered proton concentration and overall enhancing NRR. The three‐phase Au/o‐CFP electrocatalyst presents an excellent NRR performance with high NH3 yield rate of 40.6 µg h−1 mg−1 at −0.30 V and great FE of 31.3% at −0.10 V versus RHE (0.1 m Na2SO4). The N2‐bubble contact angle result and cyclic voltammetry analysis confirm that the hydrophobic interface has a relatively strong interaction with N2 bubble for enhanced NRR and weak electrocatalytic activity for HER. Significantly, the three‐phase Au/o‐CFP exhibits excellent stability with a negligible fluctuation of NH3 yield and FE in seven‐cycle test. This work provides a new strategy for improving NRR and simultaneously inhibiting HER.
1 June 2016 in Journal of Alloys and Compounds
27 October 2016 in RSC Advances
Magnetic RGO/MnFe2O4hybrids were fabricated in a green manner for significant MB decomposition with an experimentally proven Fe/Mn redox couple synergetic catalytic mechanism.