25 January 2007 in Chemical Engineering Communications
HHHanatou Adamou Harouna-Oumarou
Hanatou Adamou Harouna-Oumarou
The kinetic study of the aqueous extraction of Tilia sapwood was based on temperature, while all the other factors were kept constant. Several models were used and compared to explain the kinetics of the aqueous solid-liquid extraction of Tilia sapwood. For each model, the rate constant, the equilibrium extraction capacity, and the initial extraction rate were evaluated to analyze the suitability of these kinetic models to describe the leaching process for temperatures ranging from 313 to 363 K. The pseudo first-order model could not be applied during the whole of the process. The Elovich model provided a good degree of correlation (from 0.929 to 0.988) and could be applied all along the extraction process. The pseudo second-order model was satisfactorily applied, with coefficients of correlation over 0.998, showing that it perfectly described the process. A physical explanation of these models was finally proposed.
30 September 2008 in Bioresource Technology
1 January 2000 in Journal of Analytical Methods in Chemistry
Phenol is an organic pollutant found in various types of industrial wastewater. Due to its bactericidal properties, it is difficult to eliminate it by classic treatment methods. In this work, the degradation of this compound by Fenton reaction at mild temperature and pressure conditions is studied. An experimental design was applied in order to quantify the influence of operating parameters on the efficiency of this method. The field of study was defined between 20 and 50°C for the temperature, 1 and 4 g L−1 for the phenol concentration, 10 and 28 for the H2O2 to phenol molar ratio, and 0.02 to 0.08 for the Fe(II) to phenol concentration ratio. It was shown that the temperature and the amount of catalyst have a strong influence. A model giving the decrease of COD was established. The COD decrease was between 40% and 72% and phenol had totally disappeared.
10 May 2003 in Tetrahedron Letters
1 January 2000 in Journal of Analytical Methods in Chemistry
The paper describes the development of periodic modules used for the peptide synthesis of hydroxamic acid. A powder conveyor using the principle of positive weighing distribution is described. Purification is provided using automatic filtration and a liquid— liquid extraction module separation device. Device quality is improved using failure mode and effects analysis.
31 August 1999 in Laboratory Robotics and Automation