Khalidilla Yussupov

Khalidilla Yussupov

Auto-generated profile, based on publicly available information

Khalidilla Yussupov

Satbayev Univ, Alma Ata 50013, Kazakhstan

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2023 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
KYKhalidilla Yussupov
Khalidilla Yussupov
YAYerbolat Aben
Yerbolat Aben
AKAKHMETKANOV D K
AKHMETKANOV D K
KAKhairulla Abenk
Khairulla Abenk
SYSaltanat Yussupova
Saltanat Yussupova
Purpose. The research is aimed at increasing the useful component content in a pregnant solution during in-situ leaching (ISL) using a solid oxidizer and increasing the ferric iron concentration in the leaching solution based on laboratory research. Methods. Laboratory research is performed on a specially developed model electrolyzer for obtaining comparative data on divalent iron oxidation to trivalent iron and the change in the useful component content in a pregnant solution. Firstly, tests are conducted with a basic leaching solution, then on the oxidation of the leaching solution with a solid oxidizer in the form of a lead dioxide plate. Tests are conducted by changing sulphuric acid concentration within 5-50 g/l, amount of divalent iron ions in the solution from 0.5 up to 4.0 g, lead dioxide plate surface area from 19 to 76 cm2. The leaching time is up to 10 hours. Findings. The results of laboratory research on determining the oxidation degree of divalent iron ions and change in the oxidation-reduction potential (ORP) depending on the sulphuric acid concentration and on the initial concentration of divalent iron ions in the initial solution are presented. With a change in the sulphuric acid concentration from 5 to 50 g/l, the oxidation value of divalent iron ions increases from 26.5 to 96.5%, and with an increase in the initial solution concentration of divalent iron, the oxidation degree of divalent iron naturally decreases from 95.2 to 58.8%. In the initial leaching solution, the divalent solution concentration is 312 mg/l, and that of the trivalent solution is 288 mg/l. After oxidation with a solid oxidizer, the divalent and trivalent iron concentrations are 56 and 392 mg/l, respectively. In the course of further laboratory research using core materials from a uranium deposit, it has been revealed that when leaching with a basic solution, the uranium content in the pregnant solution is 19.36 mg/l, and when leaching with a solution after oxidation with a solid oxidizer, it is 27.9 mg/l, which is by 8.54 mg/l more. Originality. New dependences have been determined of the oxidation degree of divalent iron ions to trivalent one on the sulphuric acid concentration and on the initial concentration of divalent iron ions, as well as the useful component content in the pregnant solution on the leaching time when using a solid oxidizer. Practical implications. Using of a solid oxidizer, it is possible to increase the trivalent iron concentration in the leaching solution and the useful component content in the pregnant solution compared with the basic technology, thereby reducing the time of mining uranium reserves. Proposed technology is environmentally friendly, with low capital costs.

1 January 2021 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
KYKhalidilla Yussupov
Khalidilla Yussupov
YAYerbolat Aben
Yerbolat Aben
AOArmanbek Omirgali
Armanbek Omirgali
ARAzamat Rakhmanberdiyev
Azamat Rakhmanberdiyev
Purpose is to increase a sorbent denitration degree in the context of underground uranium leaching while optimizing reagent concentration as well as a degree of the solution activation on the basis of laboratory research. Methods. Analysis has been applied as well as scientific generalization of scientific-and-engineering information, laboratory research, statistic processing, and analysis of the research results. The laboratory experiments involved specific mixture to obtain comparative data of sulfuric solution activity and identify optimum degree of the solution activation for denitration. After processing, the solution from activator was analyzed as for its activity; the bulk was poured into a tank for repetitive experiments. First, the research did not involve the solution activation; then, activation with 4-15 minutes was added. Sulfuric acid concentration was 20 and 25 g/dm3; L-S ratio was 1/8; and washing time was 40, 60, and 120 minutes. Findings. Laboratory research results have been demonstrated concerning sorbent denitration in terms of varying degrees of activation, sulfuric acid concentration, and response time. It has been demonstrated that it is sufficient for washing solution activation to activate reagent only before extra intensification of a mother solution resulting in the reduced volume of the solution being processed and costs. It has been determined that five- to nine-minute activation period is the efficient interval factoring into the decreased nitrate content in the sorbent after washing to compare with 9-18% in terms of a basic technique depending upon a reagent concentration. Originality.New dependences of a sorbent denitration degree as well as nitrate content within a solution upon sulfuric acid concentration and the solution activation degree have been defined. Practical implications. Washing solution activation results in the increased denitration degree of a sorbent to compare with the basic technique. The proposed method is more preferable owing to low capital costs. Moreover, it is integrated easily in the available system being also absolutely sustainable. Keywords: denitration, sorbent, sorption, desorption, activation, sulfuric acid, uranium

1 January 2020 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
YOYernur Omarbekov
Yernur Omarbekov
KYKhalidilla Yussupov
Khalidilla Yussupov

1 January 2021 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
KYKh.A Yusupov
Kh.A Yusupov
Kanay RysbekovKanay Rysbekov
Kanay Rysbekov
KAKh.Kh Aben
Kh.Kh Aben
GBG.B Bakhmagambetova
G.B Bakhmagambetova
Purpose. Increasing the efficiency of gold heap leaching by changing the solution rheological properties due to its mechanical activation. Semi-industrial tests were carried out to verify the results of laboratory work. Methodology. First, semi-industrial tests were carried out without activation of the solution (basic technology), and then the solution activation was applied. The ore amount in the stockpile was 600 kg; the gold content in the ore is 1.12 g/t. At the same time, the concentration of cyanide was 400 ppm. The activation degree was from 3 to 8 minutes, the leaching time was 2, 4, 6 hours, the solution temperature varied from 13 to 30 degrees. Findings. According to the results of semi-industrial tests, the dependence of gold content, pH value, and residual concentration of the reagent on the leaching time was obtained using both proposed technology and the basic one. Comparison of the semi-industrial test results related to the basic technology and proposed one (with the solution activation) showed that the maximum gold content in the productive solution with the basic technology is 1.83 mg/l, and with the activation of the solution it is 2.10 mg/l. Hence, there is an increase in the gold content by 14.7% with the solution activation Originality. Dependence of gold content in productive solution, pH value, and residual concentration of the reagent in solution on the degree of its activation has been obtained. Practical value. The optimum degree of the treatment solution activation during gold heap leaching is determined, which is from 5 minutes to 7 minutes depending on the leaching time, which increases the gold content in the solution by 14.7%.

30 March 2025 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
KYKhalidilla Yussupov
Khalidilla Yussupov
SMSergey Mikhalovsky
Sergey Mikhalovsky
MKMohammad Khalid
Mohammad Khalid
Kanay RysbekovKanay Rysbekov
Kanay Rysbekov
AOAbay Omarov
Abay Omarov
AAAliya Akzholova
Aliya Akzholova
Purpose. The research aims to improve the efficiency and reliability of repair-and-renewal operations in technological wells in complex mining and geological conditions involved in in-situ uranium leaching by identifying and analyzing the in-fluence of geological, geochemical and technical factors. Methods. The research is based on a comprehensive analysis of field data on well designs, rock characteristics and geochemical conditions of ore-bearing horizons. Filtration parameters, types of stripped rocks, composition of working solutions and peculiarities of well operation with different operating durations are analyzed. Statistical analysis methods, including correlation and regression analysis, are used to systematize the factors influencing the frequency and efficiency of repair activities. The results are compared with laboratory experiments that assess the effectiveness of various chemical reagents taking into account mineralogical-geochemical peculiarities of uranium ores. Findings. The conducted analysis makes it possible to determine that the intensity of repair-and-renewal operations is directly dependent on a combination of several factors, among which the most important are the geological structure of ore-bearing rocks and hydrochemical conditions of ore. It has been shown that with increased reservoir productivity, the need for frequent repair-and-renewal operations increases, which is explained by more active operating mode and, consequently, an increased load on operational elements. Characteristic patterns of changes in filtration coefficient and chemical composition of solutions in filter intervals have been revealed, allowing for more accurate prediction of the time and volume of the necessary repairs. Originality. Dependences of the quantity of repair-and-renewal operations of wells on reservoir productivity and geochemical conditions of ore at different stages of in-situ uranium leaching through boreholes have been obtained. Practical implications. The results obtained enable engineers and technologists to develop more reliable and flexible well maintenance and repair plans tailored to specific geologic-hydrodynamic and geochemical conditions. It reduces the risks of accidents, but also increases the overall uranium production level through more efficient use of equipment and working reagents.

1 April 2020 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
KYKh.A. Yusupov
Kh.A. Yusupov
EOE.U. Omarbekov
E.U. Omarbekov
Study of application of 'pumping wells" when mining of uranium deposits by in-situ leaching (ISL) to the mine "Karatau" under conditions of high pressure of groundwater character was performed. The operating "Karatau" mine is located in a deserted, inaccessible, sparsely populated area in the southwestern part of the Shu-Sarysuy depression in the territory of the Suzaksky district, Turkestan oblast. The "Karatau" deposit differs from other deposits in that self-pouring of geotechnological wells with a statistical level of +20 m is observed at all sites. The use of traditional technology for such deposit leads to excessive material and labor costs. Therefore, the technology of "pumping wells" is proposed. It is shown that the use of "pumping wells" procedure leads to achieving a uniform flow rate of extraction wells, reduction in the purchase of the cable production costs for the purchase of submersible pumps and wells in the end cap.