The effect of incorporation of octakis({alkyl}dimethylsiloxy)octasilsesquioxanes molecules with n-octyl, n-octadecyl and 4-methyl-hexyl substituents on thermal properties of polypropylene (PP), low-density polyethylene (LDPE) and high-density polyethylene (HDPE) was investigated. Thermal properties of those composite materials were evaluated by means of the differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) methods. The type and mass% content of POSS nanofillers influenced the crystallization and melting properties as well as thermal stability of the obtained polyolefin nanocomposites. The incorporated POSS particles—acting as nucleating agents—improved the crystallization process of those polyolefin materials. The POSS nanofiller with n-octyl substituents turned out the most effective nucleating agent. The addition of POSS nanofiller particles into the polyolefin matrix affected the melting behavior of the nanocomposites obtained, decreasing their melting temperatures. Thermal stability under nitrogen as well as in air atmosphere was most significantly enhanced for polyolefin nanocomposites contained the POSS with n-octadecyl substituents. That may result from improved compatibility of the POSS structure with long n-alkyl chain substituents at the silicon–oxygen core. The uniform dispersion of the long n-alkyl chain-substituted POSS was confirmed by SEM analysis.
A novel group of silsesquioxane derivatives, which are siloxane-silsesquioxane resins (S4SQ), was for the first time examined as possible flame retardants in polypropylene (PP) materials. Thermal stability of the PP/S4SQ composites compared to the S4SQ resins and neat PP was estimated using thermogravimetric (TG) analysis under nitrogen and in air atmosphere. The effects of the non-functionalized and n-alkyl-functionalized siloxane-silsesquioxane resins on thermostability and flame retardancy of PP materials were also evaluated by thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR) and by cone calorimeter tests. The results revealed that the functionalized S4SQ resins may form a continuous ceramic layer on the material surface during its combustion, which improves both thermal stability and flame retardancy of the PP materials. This beneficial effect was observed especially when small amounts of the S4SQ fillers were applied. The performed analyses allowed us to propose a possible mechanism for the degradation of the siloxane-silsesquioxane resins, as well as to explain their possible role during the combustion of the PP/S4SQ composites.
12 September 2017 in Journal of Polymer Science Part A: Polymer Chemistry
The copolymers of ethylene (E) with open-caged iso-butyl-substituted tri-alkenyl-silsesquioxanes (POSS-6-3 and POSS-10-3) and phenyl-substituted tetra-alkenyl-silsesquioxane (POSS-10-4) were synthesized by copolymerization over the ansa-metallocene catalyst. The influence of the kind of silsesquioxane and of the copolymerization conditions on the reaction performance and on the properties of the copolymers was studied. In the case of copolymerization of E/POSS-6-3, the positive comonomer effect was observed, which was associated with the influence of POSS-6-3 on transformation of the bimetallic ion pair to the active catalytic species. Functionality of silsesquioxanes and polymerization parameters affected the polyhedral oligomeric silsesquioxanes (POSS) contents in the copolymers which varied in the range of 1.33–7.43 wt %. Tri-alkenyl-silsesquioxanes were incorporated into the polymer chain as pendant groups while the tetra-alkenyl-silsesquioxane derivative could act as a cross-linking agent which was proved by the changes in the contents of unsaturated end groups, by the glass transition temperature values, and by the gel contents (up to 81.3% for E/POSS-10-4). Incorporation of multi-alkenyl-POSS into the polymer chain affected also the melting and crystallization behaviors.
The paper is a literature review concerning the synthesis and characterization of polymeric materials containing silsesquioxanes (POSS). The methods of preparation of the functionalized POSS-containing hybrid polymeric materials using click chemistry, polycondensation, polyaddition, ring-opening metathesis and free-radical polymerization — both conventional and controlled (ATRP) — have been presented. Depending on the polyreaction mechanism, the type of monomer used and the structure of POSS cage, linear copolymers with silsesquioxane units in the main or side chains as well as star copolymers can be obtained. The incorporation of POSS into copolymer system results in increased glass transition and decomposition temperatures, better resistance to oxidation and improved mechanical properties when compared to the conventional polymeric systems.