Derek Caudill

Derek Caudill

Auto-generated profile, based on publicly available information

Derek Caudill

RF Technology Division, National Institute of Standards and Technology, Boulder, CO 80305 USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 November 2020 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
RCRomain Charbonnier
Romain Charbonnier
CLChiehping Lai
Chiehping Lai
TTThierry Tenoux
Thierry Tenoux
DCDerek Caudill
Derek Caudill
GGGregory Gougeon
Gregory Gougeon
NGNada Golmie
Nada Golmie
This paper describes the calibration of the Volcano ray-tracing engine against channel measurements collected in an urban environment with a state-of-the-art 28-GHz directional channel sounder. A discrete set of rays, representing planar wavefronts propagating between the transmitter and receiver, were extracted from the measurements and characterized in path gain, delay, and 3D angle-of-arrival through super-resolution techniques, with average errors of only 1.2 dB, 0.55 ns, and 2.05° respectively. The extracted rays were then tracked over space as the receiver, mounted on a mobile rover equipped with military-grade GPS, traversed 66 m while amassing a total of 488 channel acquisitions. The tracked rays were then mapped to rays predicted from ray-tracing, originating through specular reflection or diffuse scattering from ambient objects. The mapping enabled object-specific calibration, namely calibrating distinct diffuse-scattering models for buildings, vehicles, and foliage. To our knowledge, this is the first effort to calibrate ray-tracing with object-specific diffuse scattering models against rays individually mapped in the path gain, delay, angle, and space domains. Results, in terms of calibrated ray-tracing parameters, fit-error statistics, and lessons learned, are included. Our chief finding was that, while most papers on millimeter-wave ray-tracing do not even consider diffuse scattering, it accounted for 20% of the total received power, whereas diffraction accounted for less than 1%.

24 April 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
DCDerek Caudill
Derek Caudill
PPPeter B. Papazian
Peter B. Papazian
CGCamillo Gentile
Camillo Gentile
JCJack Chuang
Jack Chuang
NGNada Golmie
Nada Golmie
We describe a 60-GHz channel sounder with phased-array antennas and 1-GHz bandwidth. It estimates the angle of departure (AoD)/angle of arrival (AoA) of channel multipath components (MPCs) by sweeping the antenna space of the transmitter/receiver through 5.6° electronically steerable beams. The associated 26.1-dBi gain and resultant 36-dBm EIRP of the beams enable sounding up to hundreds of meters. Both ends integrate multiple arrays to extend the ± 45° field of view (FoV) of the individual arrays to an omnidirectional view; the additional advantage of integrating multiple arrays is to quicken the channel sweep period to just 262 μ s, corresponding to a maximum closing velocity of 33 km/h for vehicle-to-vehicle (V2V) scenarios. The receiver is mounted on a mobile robot whose navigational system enables rapid, autonomous, and untethered data collection. Over-the-air (OTA) methods to characterize the array beams patterns, calibrate the system impulse response, and compensate for clock drift are proposed such that properties of the MPCs can be extracted with high fidelity through super-resolution techniques. To substantiate the latter, we compare estimated properties against ground-truth values from extensive field measurements. The mean absolute error in angle was reported as 2.87°.

2 September 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
DCDerek Caudill
Derek Caudill
JCJack Chuang
Jack Chuang
SJSung Yun Jun
Sung Yun Jun
CGCamillo Gentile
Camillo Gentile
NGNada Golmie
Nada Golmie
We propose a 28.5-GHz channel sounder that switches through all antennas of multiple dual-polarized 8 x 8 phased arrays at the transmitter and receiver and performs beamforming in postprocessing through digital weights to synthesize a sweepable beam. To our knowledge, we are the first to implement--what we refer to as--switched beamforming with phased arrays for millimeter-wave channel sounding, realized through highly stable Rubidium clocks and local oscillators coupled with precision over-the-air calibration techniques developed in house. By circumventing the time-consuming programming of analog weights that is associated with analog beamforming--what phased arrays are designed for--we can sweep a 3-D double-omnidirectional dual-polarized channel in just 1.3 ms, for real-time sounding. By in turn circumventing the coarse precision of analog weights, we can synthesize ideal beam patterns thanks to the effectively infinite precision of digital weights, enabling fine weight calibration for the nonidealities of the system hardware and fine weight tapering for sidelobe suppression. This translates to average estimation errors of 0.47° in 3-D double-directional angle, 0.48 dB in co-polarized path gain, and 0.18 ns in delay, as substantiated by field measurements.

2 March 2021 in IEEE Access
Verified
Journal Article
Open access
ABAnmol Bhardwaj
Anmol Bhardwaj
DCDerek Caudill
Derek Caudill
CGCamillo Gentile
Camillo Gentile
JCJack Chuang
Jack Chuang
JSJelena Senic
Jelena Senic
DMDavid Michelson
David Michelson
Previous efforts to develop simulation and/or measurement-based channel propagation models for the effect of human blockage on millimeter-wave communication systems have yielded important results, but lack either accuracy, generality, or simplicity. To fill that void, in this paper we propose a hybrid geometrical-empirical model for human presence; we refer to it as human presence because reflection from the body before and after blockage occurs in addition to diffraction around the body during blockage (as in previous efforts) is incorporated. Specifically, propagation is modeled as the superposition of the main transmission path and reflected and/or diffracted paths from the body; the geometrical component of the model accounts for the phase of each path while the empirical component accounts for its amplitude. To validate the proposed model and extract its empirical parameters, an exhaustive measurement campaign with 120 blockage scenarios, comprising varying human subjects and transmitter-human-receiver configurations, was conducted; a total of 180,000 channel acquisitions was recorded with our precision, state-of the-art 60-GHz channel sounder. The overall model is shown to be computationally efficient yet general enough to accurately represent a wide range of scenarios.

28 December 2021 in IEEE Open Journal of Vehicular Technology
Verified
Journal Article
Open access
SBSteve Blandino
Steve Blandino
JSJelena Senic
Jelena Senic
CGCamillo Gentile
Camillo Gentile
DCDerek Caudill
Derek Caudill
JCJack Chuang
Jack Chuang
AKAtiqa Kayani
Atiqa Kayani
Beamforming training refers to the exhaustive scan over which the transmitter and receiver jointly steer their beams along a predefined set of double-directional angles to determine the beam pairs that coincide with the dominant propagation paths of the channel, for spatial multiplexing at millimeter-wave. When mobile, training necessitates a high refresh rate to maintain connectivity and so, to reduce overhead, beamtracking algorithms exploit the spatial-temporal consistency of the channel to localize the scan around the beam pairs determined at a previous time. The algorithms true performance, however, is still unknown since results reported to date are based on oversimplified channel models. In this paper, we propose a novel beamtracking algorithm formulated as a first-order Markov process that supports multiple beam pairs. The algorithm is evaluated through actual channel measurements not a channel model recorded with our high-precision 3D double-directional 60 GHz channel sounder. The measurement campaign, to our knowledge, is unprecedented: with 10,895 large-scale measurements, spaced 8.8 cm apart on average to emulate continuous motion, over which the mobile receiver traversed a total of 900.2 m. We demonstrate that four beam pairs can be sustained always and that eight pairs can be sustained 57% of the time.

22 March 2021 in IEEE Open Journal of Vehicular Technology
Verified
Journal Article
Open access
AHAidan Hughes
Aidan Hughes
SJSung Yun Jun
Sung Yun Jun
CGCamillo Gentile
Camillo Gentile
DCDerek Caudill
Derek Caudill
JCJack Chuang
Jack Chuang
DMDavid Michelson
David Michelson
Due to narrow beamwidth and channel sparseness, millimeter-wave receivers will detect much less multipath than their microwave counterparts, fundamentally changing the small-scale fading properties. By corollary, the de facto Rayleigh-Rice model, which assumes a rich multipath environment interpreted by the Clarke-Jakes omnidirectional ring of scatterers, does not provide an accurate description of this fading nor of the correlation distance that it predicts. Rather, a model interpreted by a directional ring of scatterers, recently proposed in seminal work by Va et al., theoretically demonstrated a strong dependence of correlation distance on beamwidth. To support Va's model through actual measurement, we conducted an exhaustive measurement campaign in five different environments - three indoor and two outdoor - with our 60 GHz 3D double-directional channel sounder, compiling over 36,000 channel captures. By exploiting the super-resolution capabilities of the channel sounder, we were the first, to our knowledge, to measure correlation distance as a function of continuous beamwidth. We showed that for narrow beamwidth, correlation was maintained for much longer distances than predicted by the Rayleigh-Rice model, validating Va's model. As the beamwidth approached omnidirectionality, with increasing number of multipath detected, the behavior indeed approached the Rayleigh-Rice model.