Hannu Välimäki

Hannu Välimäki

Auto-generated profile, based on publicly available information

Hannu Välimäki

Micro- and Nanosystems Research Group, Faculty of Medicine and Health Technology, Tampere University, Tampere, Finland

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2022 in Stem Cells International
Verified
Journal Article
Open access
PDF file
MHMartta Häkli
Martta Häkli
JKJoose Kreutzer
Joose Kreutzer
AMAntti-Juhana Mäki
Antti-Juhana Mäki
HVHannu Välimäki
Hannu Välimäki
RCReeja Maria Cherian
Reeja Maria Cherian
MPMari Pekkanen-Mattila
Mari Pekkanen-Mattila
Ischemic heart disease is the most common cardiovascular disease and a major burden for healthcare worldwide. However, its pathophysiology is still not fully understood, and human-based models for disease mechanisms and treatments are needed. Here, we used human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) to model acute ischemia-reperfusion in our novel cell culture assembly. The assembly enables exchange of oxygen partial pressure for the cells within minutes, mimicking acute ischemic event. In this study, hypoxia was induced using 0 O2 gas for three hours and reoxygenation with 19 O2 gas for 24 hours in serum- and glucose-free medium. According to electrophysiological recordings, hypoxia decreased the hiPSC-CM-beating frequency and field potential (FP) amplitude. Furthermore, FP depolarization time and propagation slowed down. Most of the electrophysiological changes reverted during reoxygenation. However, immunocytochemical staining of the hypoxic and reoxygenation samples showed that morphological changes and changes in the sarcomere structure did not revert during reoxygenation but further deteriorated. qPCR results showed no significant differences in apoptosis or stress-related genes or in the expression of glycolytic genes. In conclusion, the hiPSC-CMs reproduced many characteristic changes of adult CMs during ischemia and reperfusion, indicating their usefulness as a human-based model of acute cardiac ischemia-reperfusion.

1 May 2017
Verified
Conference Paper
Closed access
DRDhanesh Kattipparambil Rajan
Dhanesh Kattipparambil Rajan
JVJarmo Verho
Jarmo Verho
JKJoose Kreutzer
Joose Kreutzer
HVHannu Valimaki
Hannu Valimaki
HIHeimo Ihalainen
Heimo Ihalainen
Susanna MiettinenSusanna Miettinen
Susanna Miettinen
Cell culture in stem cell research is on the rise, not only for basic research but also for its potential medical and therapeutic applications. Monitoring culture process using sensors throughout the culture helps to optimize culture conditions for optimal growth and maximize yield from the cells. Further, the sensor data gives insight into developing better cell culture systems. Typical stem cell culture platforms, e.g. well plates or flasks, cannot be easily equipped with sensors and impose many challenges in periodic process measurements in a CO 2 incubator. We present an incubator compatible modular measurement system with three sensors, to monitor pH, temperature and humidity continuously throughout the culture. Sensors are assembled around a flow through cuvette for highly sterile non-contact measurements. No sample preparation or sample extraction from the incubator is needed and the measurements are carried out in a closed flow loop without wasting any medium. The modular assembly is novel, reusable and feasible for humid incubator environments. The system has been tested, validated and used in mesenchymal stem cell expansion and differentiation, for periods ranging from two to three weeks. Once the measurement has commenced at the beginning of culture, continuous measurements without sensor recalibration or special manual attention are carried out till the end of the culture. Measurement data clearly show the interplay between measured parameters, indicating a few stress sources present all through the culture. Additionally, it gives an overall picture of behavior of critical control parameters in an incubator and points out the need for bioprocess systems with automatic process monitoring and smart control for maximum yield, optimal growth and maintenance of the cells.

21 October 2022 in Biomedical Microdevices
Verified
Journal Article
Open access
PDF file
KTKaisa Tornberg
Kaisa Tornberg
HVHannu Välimäki
Hannu Välimäki
SVSilmu Valaskivi
Silmu Valaskivi
AMAntti-Juhana Mäki
Antti-Juhana Mäki
MJMatias Jokinen
Matias Jokinen
Pasi KallioPasi Kallio
Pasi Kallio
Hypoxia is a condition where tissue oxygen levels fall below normal levels. In locally induced hypoxia due to blood vessel blockage, oxygen delivery becomes compromised. The site where blood flow is diminished the most forms a zero-oxygen core, and different oxygenation zones form around this core with varying oxygen concentrations. Naturally, these differing oxygen microenvironments drive cells to respond according to their oxygenation status. To study these cellular processes in laboratory settings, the cellular gas microenvironments should be controlled rapidly and precisely. In this study, we propose an organ-on-a-chip device that provides control over the oxygen environments in three separate compartments as well as the possibility of rapidly changing the corresponding oxygen concentrations. The proposed device includes a microfluidic channel structure with three separate arrays of narrow microchannels that guide gas mixtures with desired oxygen concentrations to diffuse through a thin gas-permeable membrane into cell culture areas. The proposed microfluidic channel structure is characterized using a 2D ratiometric oxygen imaging system, and the measurements confirm that the oxygen concentrations at the cell culture surface can be modulated in a few minutes. The structure is capable of creating hypoxic oxygen tension, and distinct oxygen environments can be generated simultaneously in the three compartments. By combining the microfluidic channel structure with an open-well coculture device, multicellular cultures can be established together with compartmentalized oxygen environment modulation. We demonstrate that the proposed compartmentalized organ-on-a-chip structure is suitable for cell culture.

3 June 2020 in Biomedical Microdevices
Verified
Journal Article
Open access
PDF file
HVHannu Välimäki
Hannu Välimäki
THTanja Hyvärinen
Tanja Hyvärinen
JLJoni Leivo
Joni Leivo
HIHaider Iftikhar
Haider Iftikhar
Mari Pekkanen-MattilaMari Pekkanen-Mattila
Mari Pekkanen-Mattila
JLJukka Lekkala
Jukka Lekkala
Luminescence-based oxygen sensing is a widely used tool in cell culture applications. In a typical configuration, the luminescent oxygen indicators are embedded in a solid, oxygen-permeable matrix in contact with the culture medium. However, in sensitive cell cultures even minimal leaching of the potentially cytotoxic indicators can become an issue. One way to prevent the leaching is to immobilize the indicators covalently into the supporting matrix. In this paper, we report on a method where platinum(II)-5,10,15,20-tetrakis-(2,3,4,5,6-pentafluorphenyl)-porphyrin (PtTFPP) oxygen indicators are covalently immobilized into a polymer matrix consisting of polystyrene and poly(pentafluorostyrene). We study how the covalent immobilization influences the sensing material’s cytotoxicity to human induced pluripotent stem cell-derived (hiPSC-derived) neurons and cardiomyocytes (CMs) through 7–13 days culturing experiments and various viability analyses. Furthermore, we study the effect of the covalent immobilization on the indicator leaching and the oxygen sensing properties of the material. In addition, we demonstrate the use of the covalently linked oxygen sensing material in real time oxygen tension monitoring in functional hypoxia studies of the hiPSC-derived CMs. The results show that the covalently immobilized indicators substantially reduce indicator leaching and the cytotoxicity of the oxygen sensing material, while the influence on the oxygen sensing properties remains small or nonexistent.

9 June 2020 in IEEE Access
Verified
Journal Article
Open access
DRDhanesh Kattipparambil Rajan
Dhanesh Kattipparambil Rajan
AMAntti-Juhana Mäki
Antti-Juhana Mäki
MPMari Pekkanen-Mattila
Mari Pekkanen-Mattila
JKJoose Kreutzer
Joose Kreutzer
Tomi RyynänenTomi Ryynänen
Tomi Ryynänen
JLJukka Lekkala
Jukka Lekkala
Human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) provide a great resource for functional cell and tissue models that can be applied in heart research, pharmaceutical industry, and future regenerative medicine. During cell model experiments, precise control of environmental parameters is important. Temperature is a fundamental parameter, and the acute effect of temperature on hiPSC-CM functions has previously been studied. This paper reports on long-term, systematic temperature response studies of hiPSC-CM cultures. The studies were conducted outside an incubator in a modular cell culturing system along with a temperature sensor plate (TSP) and a new beating analysis software (CMaN -cardiomyocyte function analysis tool). Temperature sensing at the actual cell location is challenging with bulky external sensors; however, a TSP with resistive microsensors provides an effortless solution. Experimental results showed that temperature nonlinearly affects the hiPSC-CM beating frequency with a Q10 temperature coefficient of ~2.2. Both the active (contraction) and passive (relaxation) movements were influenced by temperature, and changes in the relaxation times were larger than the contraction times. However, the contraction amplitudes exhibited a greater spread of variation. We also present novel results on the visualization of hiPSC-CM contractile networking and non-invasive image-based measurement of signal propagation between dissociated CM clusters. Compared with previously reported tools, CMaN is an advanced and easy-to-use robust software. It is faster, more sensitive, computationally less expensive, and extracts six different signals of the contractile motion per process, providing at least one useful beating signal even in complex cases. The software also supports movement center detection and independent computation of the relaxation and contraction parameters.

4 June 2025 in ACS Biomaterials Science & Engineering
Verified
Journal Article
Open access
HVHannu Välimäki
Hannu Välimäki
KAKarim Ameziane
Karim Ameziane
SBSriparna Bhattacharya
Sriparna Bhattacharya
JMJonathan Massera
Jonathan Massera
Pasi KallioPasi Kallio
Pasi Kallio
JAJeffrey Anker
Jeffrey Anker
Developing bone replacement scaffolds has been a driving ambition of regenerative medicine. Although great progress has been achieved for small scaffolds, the real clinical need is for large scaffolds >5 mm. Oxygenating these scaffolds is challenging, as slow diffusion rates lead to necrotic regions in the scaffold core. In this work, we modulate in vitro oxygen concentration in a scaffold in a flow chamber using an external perfusion pump while imaging oxygen concentrations below the scaffolds. With no external flow, yeast cells growing in the scaffold deplete oxygen, especially from the center, with concentrations reaching a steady state consistent with reaction-diffusion models. The oxygen is restored via pumping fresh medium through the scaffold. The oxygen profiles are highly reproducible from cycle to cycle. This lays the groundwork for future in vivo oxygen imaging studies using localized light sources and external perfusion pumps for modulation.