Poly-(dimethylsiloxane) (PDMS) has been used as a negative friction layer in triboelectric nanogenerators (TENGs) owing to its high electronegativity and flexibility. With the advantage of PDMS, the design of various materials to further enhance the energy output of a PDMS-based TENG system have been suggested for practical applications. Herein, we report a high-efficiency PDMS-based TENG wherein surface-modified carbon nanotubes (SMCs), fabricated by one-step pulsed laser ablation, were used as a PDMS additive. SMCs possess oxygen-rich functional groups on the surface that enhance their permittivity and dispersibility in PDMS. Consequently, improvements in the triboelectric performance and capacitance of an SMC-PDMS-based TENG device (SMC-PDMS) were observed, owing to the synergistic effects of the enhanced permittivity and dispersibility of SMCs. Compared to a pristine PDMS-based TENG, SMC-PDMS containing 0.05 wt% SMCs showed an output voltage of 382.12 V and a current of 29.44 μA, which correspond to 170% and 243% enhancements, respectively. In addition, a facile radio frequency plasma treatment was performed to further improve the performance of SMC-PDMS, resulting in an output voltage of 414.63 V, a current of 40.03 μA, and a power density of 7.69 W m−2.
Graphene oxide quantum dots (GOQDs) are usually prepared using expensive carbon precursors such as carbon nanotubes (CNT) or graphene under the strong acidic condition, which requires an additional purifying process. Here, we first develop a facile pulsed laser ablation in liquid (PLAL) technique for preparing GOQDs using earth-abundant and low-cost coal as a precursor. Only ethanol and coal are used to produce GOQDs with excellent optical properties. The prepared GOQDs exhibit excellent optoelectronic properties which can be successfully utilized in bioimaging applications.
12 October 2021 in Journal of Materials Chemistry A
Development of an efficient and stable electrocatalyst for the oxygen evolution reaction (OER) is crucial to generate hydrogen via water splitting as a sustainable fuel. Nickel iron layered double hydroxides (NF-LDHs) are considered the most promising electrocatalysts for alkaline water oxidation among various low-cost transition metal-based electrocatalysts although exact mechanisms are still on debate. Herein, we disclose that quaternary multimetallic Ni–Fe–Al–Co LDHs (NFAC-MELDHs) function as one of the best catalysts for alkaline as well as seawater oxidation due to the synergetic effects among the four different redox-flexible metals. The multimetallic Ni–Fe–Al–Co LDHs are prepared via the metal–organic framework (MOF)-derived electrochemical incorporation of fourth transition metal (Co) into ternary Ni–Fe–Al LDHs grown by a hydrothermal reaction. Moreover, we reveal an exact electrocatalytic mechanism for the OER in NFAC-MELDHs via ex situ spectroscopies in combination with density functional theory (DFT) calculations. Redox-flexible Fe is identified with a real active site in synergy with the neighboring metals stabilizing adsorption of oxygen intermediates and simultaneously facilitating charge transfer. In consequence, NFAC-MELDHs exhibit one of the lowest overpotentials of 220 and 280 mV for affording a current density of 100 mA cm−2 in alkaline and simulating seawater solutions, respectively. More importantly, activity and stability merits in electrocatalysis for the OER are improved in the sequence of unary, binary, ternary, and quaternary LDHs, implying that catalyst design using multimetals for LDHs is a highly promising strategy.
To tune the electronic and optoelectronic properties of graphene quantum dots (GQDs), heteroatom doping (e.g., nitrogen (N), boron (B), and sulfur (S)) is an effective method. However, it is difficult to incorporate S into the carbon framework of GQDs because the atomic size of S is much larger than that of C atoms, compared to N and B. In this study, we report a simple and one-step method for the synthesis of sulfur-doped GQDs (S-GQDs) via the pulsed laser ablation in liquid (PLAL) process. The as-prepared S-GQDs exhibited enhanced fluorescence quantum yields (0.8% → 3.89%) with a huge improved absorption band in ultraviolet (UV) region (200 ∼ 400 nm) and excellent photo stability under the UV radiation at 360 nm. In addition, XPS results revealed that the PLAL process can effectively facilitate the incorporation of S into the carbon framework compared to those produced by the chemical exfoliation method (e.g., hydrothermal method). And also, the mechanisms related with the optical properties of S-GQDs was investigated by time-resolved photoluminescence (TRPL) spectroscopy. We believe that the PLAL process proposed in this study will serve as a simple and one-step route for designing S-GQDs and opens up to opportunities for their potential applications.
With respect to the detection of Fe3+ ions, graphene quantum dots (GQDs) have limitations for commercialization owing to their high limit of detection (LOD). Here, we report a one-step pulsed laser ablation (PLA) process to fabricate amino-functionalized GQDs (FGQDs) for the efficient detection of Fe3+ using polypyrrole (PPy) both as a precursor (amine N) and as a surfactant and also using graphite as a carbon precursor. Using this method, the amine N groups were easily incorporated into the carbon network of the GQDs. Additionally, compared to pristine GQDs, FGQDs showed smaller particle sizes and narrower size distributions owing to the surface passivation effects of the PPy surfactant. Due to the synergistic effect of surface passivation and incorporation of amine N groups, FGQDs exhibited a sensitive response to Fe3+ ions in the concentration range of 500 nM to 50 μM, which is lower than the quality standards for Fe3+ ions (∼5.36 μM) as suggested by the World Health Organization (WHO). Furthermore, the processing time for synthesizing FGQDs by the PLA process was less than 30 min, thus allowing successful practical applications of GQDs in the sensing field.