9 January 2025 in IEEE Transactions on Transportation Electrification
It is well-known that lithium plating significantly reduces the capacity of Li-ion batteries, particularly at elevated charging rates, high state of charge (SoC), and low temperatures. This study presents a simplified electrochemical battery model incorporating side reactions for real-time (RT) applications. The proposed model is implemented on a battery management system (BMS) using the TI TMS320F28335 DSP, the model’s internal and external states are validated through extensive experimental tests against the high-fidelity P2D model by Gamma Technology. The results demonstrated the model’s ability to accurately depict the behavior of a commercially available type 21 700 cylindrical cell while minimizing execution power consumption. The lithium plating/stripping model is examined and compared with the actual voltage plateau characteristics observed in practical testing. Finally, various controllers are designed and implemented into the BMS to optimize the charging current and eliminate plating without significantly increasing charging duration. The battery demonstrated an increase in capacity of 8.3% when using the proposed charging control algorithm compared with the common constant current (CC)–constant voltage (CV) technique, with a charging time increase of less than 30 min, resulting in a 17% improvement in SoH. This demonstrates the effectiveness of enhancing battery performance and longevity with minimal additional charging time.
13 December 2025 in eTransportation
29 May 2024 in IEEE Access
Lithium-ion batteries play a crucial role in present-day energy storage systems, necessitating the development of precise prediction models to improve their performance and ensure safety. The present study introduces a comprehensive methodology that encompasses the calibration, validation, and application of two separate Li-ion battery electrochemical models: the equivalent circuit model and the electrochemistry-based model. The calibration and validation of these models are based on experimental data conducted under various operating conditions, including charge/discharge rates, calendaring temperature, and Hybrid Pulse Power Characterization (HPPC) tests. After the successful validation process, these models are used to generate synthetic data tailored to real-world applications, particularly electric vertical takeoff and landing vehicles (eVTOL). The primary objective is to assess the precision of battery performance prediction, wherein the synthetic data is thoroughly compared with real experimental data. The results demonstrate the effectiveness of the proposed approach in developing a model that reduces dependence on labor-intensive testing and associated equipment costs, reduces time for experimentation, and accelerates controller development for batteries. This work highlights the importance of precise predictive models in lithium-ion batteries, facilitating the effective investigation of practical applications and advancements in energy storage technology.
29 December 2025 in Journal of Energy Storage
14 October 2025 in IEEE Open Journal of the Industrial Electronics Society
Conventional fast-charging methods for lithium-ion batteries (LIBs) face challenges in balancing charging speed, adverse side reactions, and battery degradation. This research introduces a novel dynamic fast-charging control approach incorporated into an age-aware Battery Management System (BMS). The proposed system utilizes a simplified electrochemical model and integrates closed-loop observers to detect lithium plating and Solid Electrolyte Interphase (SEI) growth, allowing real-time updates to charging profiles depending on battery states such as the state of charge (SoC), state of health (SoH), and temperature. Experimental validation is conducted using NMC811 LIB cells arranged in a 4S9P pack configuration at ambient temperatures of 25 °C and 0 °C to meet the operational requirements of eVTOL applications. The results indicate that the dynamic fast-charging controller achieves an 80% SoC in less than 28 minutes while avoiding lithium plating and excessive SEI growth, enhancing battery longevity by 25.2% and 8.8% compared to CC-CV and MCC-CV, respectively, and reducing internal impedance growth by 45% and 15%. These enhancements ensure safe operation and consistent performance in high-power, low-temperature conditions, where traditional techniques often fail. This study highlights the feasibility of the dynamic charging technique for real-world applications, improving economic efficiency and reliability in eVTOL operations.
14 October 2025 in IEEE Access
Despite substantial technological advancements, the widespread adoption of electric vehicles (EVs) and electric vertical take-off and landing (eVTOL) aircraft remains constrained by restricted driving range and prolonged charging durations. Minimizing the charging duration to approximately 15 minutes compared to conventional refueling has emerged as a potential solution to reduce range anxiety. However, directly raising the charging current to achieve this objective accelerates battery deterioration, resulting in capacity loss, power fade, and safety hazards. Numerous strategies have been introduced to reconcile fast charging with battery longevity; however, a unified framework for their evaluation and deployment is yet to be established. This review presents a comparative analysis of more than 50 studies on age-aware fast charging, emphasizing the balance between charging duration and long-term battery performance. Age-aware fast charging techniques are systematically categorized based on modeling complexity, parameterization requirements, cell chemistry, and the extent of real-world validation. Their comparative strengths and weaknesses are rigorously assessed in terms of cost–benefit tradeoffs and practical feasibility. Finally, key research gaps are identified to support the implementation of age-aware fast charging techniques in EV and eVTOL systems.