Optical metasurfaces with subwavelength thickness hold considerable promise for future advances in fundamental optics and novel optical applications due to their unprecedented ability to control the phase, amplitude, and polarization of transmitted, reflected, and diffracted light. Introducing active functionalities to optical metasurfaces is an essential step to the development of next-generation flat optical components and devices. During the last few years, many attempts have been made to develop tunable optical metasurfaces with dynamic control of optical properties (e.g., amplitude, phase, polarization, spatial/spectral/temporal responses) and early-stage device functions (e.g., beam steering, tunable focusing, tunable color filters/absorber, dynamic hologram, etc) based on a variety of novel active materials and tunable mechanisms. These recently-developed active metasurfaces show significant promise for practical applications, but significant challenges still remain. In this review, a comprehensive overview of recently-reported tunable metasurfaces is provided which focuses on the ten major tunable metasurface mechanisms. For each type of mechanism, the performance metrics on the reported tunable metasurface are outlined, and the capabilities/limitations of each mechanism and its potential for various photonic applications are compared and summarized. This review concludes with discussion of several prospective applications, emerging technologies, and research directions based on the use of tunable optical metasurfaces. We anticipate significant new advances when the tunable mechanisms are further developed in the coming years.
Conventional optical fiber has excellent performance in guiding light, which has been widely employed for long‐distance optical communication. Although the optical fiber is efficient for transmitting light, its functionality is limited by the dielectric properties of the core’s and cladding’s materials (e.g. Ge‐doped‐silica and silica glasses). The spot size of the transmitted light is diverging and restricted by the diffraction limit of the dielectric core, and the numerical aperture is determined by the refractive index of the fiber materials. However, the novel technology of metasurfaces is opening the door to a variety of optical fiber innovations. Here, we report an ultrathin optical metalens directly patterned on the facet of a photonic crystal optical fiber that enables light focusing in the telecommunication regime. In‐fiber metalenses with focal lengths of 28 μm and 40 μm at a wavelength of 1550 nm are demonstrated with maximum enhanced optical intensity as large as 234%. The ultrathin optical fiber metalens may find novel applications in optical imaging, sensing, and fiber laser designs.
The functionality of poly(dimethylsiloxane) (PDMS)-based interferometric fiber sensors for volatile organic compounds (VOCs) detection is investigated and experimentally demonstrated. Two interferometric configurations are considered in this work, namely Fabry–Perot (FP) and Sagnac interferometers (SI). Both sensors are functionalized with a thin layer of VOC-sensitive polymer: PDMS, whose degree of swelling varies as a function of VOC concentrations. This swelling effect will result in an optical path length and birefringence modulation for FP and SI sensors, respectively. In this paper, the two common VOCs, ethanol and 2-propanol, were detected by the proposed sensor and the inverse matrix method was used to differentiate the VOC in gas mixture.
4 November 2015 in IEEE Journal of Selected Topics in Quantum Electronics
A polyvinyl alcohol (PVA)/poly-acrylic acid (PAA) hydrogel coated fiber-optic intrinsic Fabry-Perot interferometer (IFPI) has been demonstrated as a pH sensor. The proposed Fabry-Perot pH interferometric sensor consists of a section of hollow-core photonic crystal fiber (HCPCF) sandwiched between the lead-in single mode fiber (SMF) and sensing SMF. The principle of the proposed sensor is based on the swelling effect of PVA/PAA hydrogel sensing film at the tip of sensing SMF, which induces optical path modulation when exposed to varying pH solutions. The pH sensor exhibits a relatively high sensitivity of 11 nm/pH ranging from the value of 4.1 to 6.9 with good repeatability and stability.
9 January 2017 in IEEE Journal of Selected Topics in Quantum Electronics
A compact fiber-optic Fabry-Perot interferometric sensor with an embedded microfluidic channel for static magnetic field measurement is proposed and implemented. Fabrication of the Fabry-Perot structure involved cascading two silica capillary tubes with different inner diameters, followed by milling of a microslot directly on the sidewall of the large inner diameter silica capillary tube, by focused ion beam micromachining. The microslot, together with the hollow structure of the small inner diameter silica capillary tubes forms an open Fabry-Perot cavity to function as a microfluidic channel. The microslot was found to improve the response time of the Fabry-Perot sensor to changes in refractive index (RI) of the cavity. Magnetic fluid was introduced in the Fabry-Perot cavity, thereby, enabling implementation of an optofluidics system for magnetic field measurement. The sensing scheme is based on the magnetic field strength induced RI change of the magnetic fluid which in turn modulates the interference spectrum of the sensor. Wavelength shifts were monitored real time for the continuous measurement of magnetic field strength. The sensor calibration curves with respect to magnetic field were plotted and the sensor exhibits a relative high magnetic field sensitivity of ~418.7 pm/Oe relative to the dip wavelength around 1590 nm.