1 January 2019 in FME Transactions
Current treatment for patients suffering from cervical spine injuries is by static braces which causes discomfort and immobilization of the neck. This paper presents a novel comfortable wearable therapy device for treating patients suffering with head/neck posture problems using parallel mechanism concept. To achieve this, a conceptual design of a three-degrees-of-freedom Revolute-Prismatic-Spherical configuration parallel manipulator with 3 extensible links is proposed. However, precision and workspace are the general considerations for designing a parallel manipulator. In this research, workspace and position analysis is carried out for the device. By applying geometrical method and vector-loop approach, the inverse kinematics equations are derived. The parallel manipulator is modeled using SolidWorks and simulated using MATLAB. From the simulation results, stroke length of the actuators, angular tilt and position of the moving platform is obtained. To validate the simulation results a preliminary prototype is built and tests were carried. The obtained results found to be satisfying the cause of the research. Furthermore, the device needs to automated and safely operated under the therapist supervision.
1 December 2024 in IAES International Journal of Robotics and Automation (IJRA)
This research presents a comprehensive design and analysis of a knee rehabilitation platform aimed at aiding individuals with knee dysfunction. Dysfunction in the knee joint can lead to an imbalance in gait and posture during activities of daily living (ADLs) such as standing, walking, and running. This study focuses on developing a 2-degree-of-freedom (2-DoF) knee rehabilitation device capable of mimicking linear and angular movements. A slider mechanism-based knee rehabilitation device is developed and simulated alongside various other mechanisms. The proposed mechanism achieves 32.5° of flexion for a linear movement of 0.45 m within 6 seconds, outperforming other mechanisms. To validate simulation results, a 3D-printed model is fabricated, and experimental studies are conducted under no-load conditions, showing close alignment with simulation outcomes with a deviation of ±5%. The device’s key features include portability, compliance, compactness, and enhanced stiffness. Future research will involve conducting pilot studies to further evaluate the practical efficacy and potential enhancements of the proposed knee rehabilitation platform.