15 April 2008 in Materials Science and Engineering: B
28 September 2011 in The European Physical Journal Applied Physics
The effect of vacuum heat treatment in the temperature range between 100 and 400 °C on the morphology and optical properties of thermally evaporated thin gold films with mass thickness from 8 to 80 nm was studied by AFM, TEM and optical spectroscopy in the spectral region of localized (surface) plasmons excitation. Our investigations have shown that change of film morphology induced by thermal annealing depends strongly on film thickness. Thus, optical behavior of thin metal films is modified due to being induced by recrystallization film permittivity changes as well as transformation of film morphology. The considered processes might be crucial for thin film optical properties determination and must be taken into account for the choice of adequate thin film optical model. Besides that, post-fabrication thermal annealing enables a wide modification of thin metal films morphology and surface plasmon resonance parameters, offering new possibilities for metal substrates design enhancing surface electromagnetic fields and therefore SERS, SEIRA, luminescence effects.
16 March 2017 in Discover Nano
Ge-rich ZrO2 films, fabricated by confocal RF magnetron sputtering of pure Ge and ZrO2 targets in Ar plasma, were studied by multi-angle laser ellipsometry, Raman scattering, Auger electron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction for varied deposition conditions and annealing treatments. It was found that as-deposited films are homogeneous for all Ge contents, thermal treatment stimulated a phase separation and a formation of crystalline Ge and ZrO2. The “start point” of this process is in the range of 640–700 °C depending on the Ge content. The higher the Ge content, the lower is the temperature necessary for phase separation, nucleation of Ge nanoclusters, and crystallization. Along with this, the crystallization temperature of the tetragonal ZrO2 exceeds that of the Ge phase, which results in the formation of Ge crystallites in an amorphous ZrO2 matrix. The mechanism of phase separation is discussed in detail.
10 January 2007 in Thin Solid Films
1 February 2010 in Journal of Nanoscience and Nanotechnology
The study is focused on formation and optical properties of nanostructures induced by laser radiation on the surface of Si1-xGe(x)/Si hetero-structures. Formation of self-assembling nanohills induced by irradiation of nanosecond Nd:YAG laser pulses on the Si0.7Ge0.3/Si hetero-epitaxial structures is reported. The atomic force microscope study of the irradiated surface morphology has shown a start of nanohills formation after laser irradiation of the intensity I = 7.0 MW/cm2. The huge "blue shift" of photoluminescence spectra with maximum intensity in region of 700-800 nm (1.76-1.54 eV) is explained by the quantum confinement effect in the nanohills. The maximum of this photoluminescence band slightly shifts to shorter wavelengths with the increase of the intensity of laser pulses used for sample treatment. Appearance of the 300 cm(-1) Ge-Ge vibration band in Raman scattering spectra for sample irradiated with I = 20.0 MW/cm2 is explained by Ge phase formation. Formation of the Ge-rich phase is explained by localization of Ge atoms drifting toward the irradiated surface under the thermal gradient due to strong absorption of laser radiation. Ellipsometric data confirm appearance of Ge-rich phase precipitates amounting to 7.1%, 6.4% of the total Ge content induced by laser radiation of intensities I1 = 20.0 MW/cm2, I2 = 7.0 MW/cm2 respectively.