16 July 2021 in Science Advances
We 3D-print unified soft robots comprising fully integrated fluidic circuitry capable of sophisticated operations.
5 February 2023 in Advanced Materials Technologies
Microinjection protocols are ubiquitous throughout biomedical fields, with hollow microneedle arrays (MNAs) offering distinctive benefits in both research and clinical settings. Unfortunately, manufacturing‐associated barriers remain a critical impediment to emerging applications that demand high‐density arrays of hollow, high‐aspect‐ratio microneedles. To address such challenges, here, a hybrid additive manufacturing approach that combines digital light processing (DLP) 3D printing with “ex situ direct laser writing (esDLW)” is presented to enable new classes of MNAs for fluidic microinjections. Experimental results for esDLW‐based 3D printing of arrays of high‐aspect‐ratio microneedles—with 30 µm inner diameters, 50 µm outer diameters, and 550 µm heights, and arrayed with 100 µm needle‐to‐needle spacing—directly onto DLP‐printed capillaries reveal uncompromised fluidic integrity at the MNA‐capillary interface during microfluidic cyclic burst‐pressure testing for input pressures in excess of 250 kPa (n = 100 cycles). Ex vivo experiments perform using excised mouse brains reveal that the MNAs not only physically withstand penetration into and retraction from brain tissue but also yield effective and distributed microinjection of surrogate fluids and nanoparticle suspensions directly into the brains. In combination, the results suggest that the presented strategy for fabricating high‐aspect‐ratio, high‐density, hollow MNAs could hold unique promise for biomedical microinjection applications.
11 September 2025 in Microsystems & Nanoengineering
Wide-ranging biomedical applications spanning both research and clinical settings rely on microinjection protocols that involve using a long, hollow microneedle to deliver foreign substances directly into biological targets, such as embryos. Unfortunately, conventional microneedles are prone to clogging—e.g., cytoplasmic material from an embryo becoming lodged inside the needle tip during penetration, thereby obstructing delivery—motivating researchers to use top-down microfabrication techniques to modify needle tips and reduce such failure modes. Recent advancements for the submicron-scale additive manufacturing approach, “Two-Photon Direct Laser Writing (DLW)”, offer a new, bottom-up pathway for re-architecting microneedle tips to address clogging susceptibility via geometric means. Here, we investigate this potential by 3D printing monolithic 650-µm-tall, 15-µm-diameter hollow microneedles comprising architectural features designed to remediate clogging phenomena: (i) a solid, fine-point tip, (ii) multiple side ports (i.e., perpendicular to the insertion direction), and (iii) an internal microfilter. Serial microinjection experiments with live zebrafish embryos reveal that the 3D microneedles yield enhanced delivery performance without any instances of complete blockages that are pervasive among both standard glass and 3D-printed control microneedles. These findings suggest that DLW-based 3D printing holds distinctive promise for high-precision microinjection applications, particularly in scenarios involving extensive serial injections or critical payloads and targets.