Electrochemical power tools, fabricated using the natural-based electrospun fibers, are regarded as essential keys in a world that is becoming increasingly reliant on fossil fuels in order to meet the challenges of rapidly depleting fossil fuel supplies.
In the present study, the electrochemical polymerization was carried out to coat the surface of electrospun polyurethane (PU) nanofibers with conductive electroactive polypyrrole (PPy) towards production of Faradaic bending actuators. For this purpose, the surface of electrospun nanofibers was first coated with a thin layer of gold using physical vapor deposition (PVD). PPy was then coated on the surface of prepared nanofibers using different consumed electric charges ranging from 0.5 to 5 C. The produced samples were characterized with respect to surface morphology, electrical properties, electrochemical properties and finally bending actuation performance of the produced actuators. The synthesis of PPy on the surface of nanofibers by the electrochemical polymerization process as well as preservation of the fibrous and porous structure of the samples was confirmed by SEM images. In the polymerization process, the amount of PPy coating on the surface of PU nanofibers increased dramatically with increasing the consumed electric charge. The results of the electrical properties of the produced nanofibrous layers showed that the surface resistivity of the produced PU/PPy nanofibrous layer was decreased from 719.5 to 51.3 Ω/sq for samples produced with the consumed charges of 0.5 and 5.0 C, respectively. Moreover, the electroactive properties of produced actuators were evaluated by cyclic voltammetry technique in a 0.1 M aqueous electrolyte solution of LiClO4 between potentials of −0.6 to 0.8 V. The results revealed that the electroactive properties of produced actuators were improved with increasing the amount of PPy coating. The evaluation of the bending actuation performance of the actuators showed that the angular displacement of the samples produced with consumed charges of 2, 3, 4 and 5 C in a potential cycle was 48°, 153°, 190° and 225°, respectively. These actuators have the potential to be applied in the fields of medicine, robotics and smart textiles.
1 February 2020 in Sensors and Actuators B: Chemical
Electrochemical actuators made of conducting polymers are one of the major types of artificial muscles that have attracted much attention in recent years. However, these artificial muscles suffer from potential drop along the length, which undermines their performance in applications requiring longer muscles. This study is aimed at enhancing the performance of this type of artificial muscles through overcoming the potential drop along the length. This is implemented using copper electroplating and creating a full-length highly conductive nanofibrous layer. Polyurethane/copper/polypyrrole (PU/Cu/PPy) nanofibrous artificial muscles were fabricated by combining electrospinning, electroplating and electrochemical polymerization. The copper electroplating affected many features of the PU nanofibrous layer including surface morphology of nanofibers, thermal, mechanical and electrical properties. Average diameter of the PU nanofibers was measured as 306 ± 48 nm, which increased significantly by increasing the duration of copper electroplating. By copper electroplating for 20 s, the onset temperature of nanofibers thermal decomposition was increased from 249 to 302 °C. Additionally, using this process, the sample Young’s modulus was increased from 2.20 ± 0.21 to 62.32 ± 5.42 MPa while its elongation at break was decreased from 173.84 ± 14.22 to 94.81 ± 10.96. After copper electroplating for duration as low as 20 s, the electrical conductivity of nanofibers was increased by more than 200 times from 48.90 ± 1.10 to 10 103.06 ± 14.28 S cm −1 . Electrochemical polymerization of pyrrole on the surface of metalized nanofibers increased the average diameter of produced nanofibers to 1030 ± 102 nm. Providing an electrical connection along the entire length of artificial muscle resulted in enhanced electroactive property and hence final bending actuation of 88° for a cycle potential between −0.8 V and 0.5 V at a scan rate of 5 mV s −1 was observed. The nanofibrous artificial muscle fabricated by the proposed method has immense potential for use in practical applications.