Objectives The aim of this study was to analyse associations between crowded housing and children’s indoor living environment, respiratory and allergic disorders and general health. Design A cross-sectional study. Setting Sweden, using data from the Swedish National Environmental Health Survey 2019. Participants The study sample included 48 512 children (aged 6–10 months, 4 years and 12 years). We also investigated associations in vulnerable subgroups, such as children with asthma and those living under unfavourable socioeconomic conditions. Primary and secondary outcome measures Primary outcomes in the living environment were at least one sign of mould, poor indoor air quality, unpleasant odours, too warm indoors in summer and too cold indoors in winter. Primary outcomes for children’s health were asthma, airway problems, breathing difficulties, rhinitis symptoms, mould and mites allergy, pollen allergy, furred pet allergy and good general health. Results About one in five children lived in an overcrowded home. Factors from the indoor living environment such as perceived poor indoor air quality and mould were significantly associated with crowded housing. Moreover, children who lived in overcrowded conditions were less likely to report good general health than children in non-crowded households (OR 0.64, 95% CI 0.54 to 0.76). This association was even stronger in children with asthma (OR 0.51, 95% CI 0.34 to 0.77). Few significant associations were, however, observed with the respiratory and allergic health outcomes. Conclusions Crowded housing is associated both with a poor indoor environment and with poorer general health in children. Children with asthma may experience even poorer general health.
Background: Connectivity is an important landscape attribute in ecological studies and conservation practices and is often expressed in terms of effective distance. If the cost of movement of an organism over a landscape is effectively represented by a raster surface, effective distances can be equated with the cost-weighted distance of least-cost paths. It is generally recognized that this measure is sensitive to the grid’s cell size, but little is known if it is always sensitive in the same way and to the same degree and if not, what makes it more (or less) sensitive. We conducted computational experiments with both synthetic and real landscape data, in which we generated and analyzed large samples of effective distances measured on cost surfaces of varying cell sizes derived from those data. The particular focus was on the statistical behavior of the ratio—referred to as ‘accuracy indicator’—of the effective distance measured on a lower-resolution cost surface to that measured on a higher-resolution cost surface. Results: In the experiment with synthetic cost surfaces, the sample values of the accuracy indicator were generally clustered around 1, but slightly greater with the absence of linear sequences (or barriers) of high-cost or inadmissible cells and smaller with the presence of such sequences. The latter tendency was more dominant, and both tendencies became more pronounced as the difference between the spatial resolutions of the associated cost surfaces increased. When two real satellite images (of different resolutions with fairly large discrepancies) were used as the basis of cost estimation, the variation of the accuracy indicator was found to be substantially large in the vicinity (1500 m) of the source but decreases quickly with an increase in distance from it. Conclusions: Effective distances measured on lower-resolution cost surfaces are generally highly correlated with—and useful predictors of—effective distances measured on higher-resolution cost surfaces. This relationship tends to be weakened when linear barriers to dispersal (e.g., roads and rivers) exist, but strengthened when moving away from sources of dispersal and/or when linear barriers (if any) are detected by other presumably more accessible and affordable sources such as vector line data. Thus, if benefits of high-resolution data are not likely to substantially outweigh their costs, the use of lower resolution data is worth considering as a cost-effective alternative in the application of least-cost path modeling to landscape connectivity analysis.