1 June 2020 in International Journal of Solids and Structures
1 March 2008 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Extension of lifetime of silicon field emitter arrays (Si-FEAs) in oxygen ambient was achieved by implanting carbon negative ions into the emitter surface. The authors examined three samples, each of which has 1024 field emission tips and implanted with carbon negative ions to the doses of , , and . The lifetime, the time when the emission current becomes half the maximum value after starting operation, was extended in accordance with the implantation dose. The lifetime of the sample which was dosed with was , which was about 17 times as long as that of as-fabricated Si-FEA.
1 December 2020 in Journal of the International Association for Shell and Spatial Structures
This paper presents a design method of Auxetic Bending-Active Gridshells (ABAGs), which are curved surfaces generated from the initial flat grid with 2-dimensional auxetic patterns. One of the mechanical properties of ABAGs is that a dome-like shape of a curved surface can be easily obtained by bending a grid due to negative Poisson’s ratio for in-plane deformation. Shapes of auxetic patterns are relevant to Poisson’s ratio. Non-periodic and/or hybrid 2-dimensional auxetic patterns are developed for designing the initial flat grid of ABAGs. Shape parameters are the sizes of each plane unit for tuning its reentrant pattern, and two types of reentrant shapes are mixed on an initial flat grid. Using the non-uniform patterns, we can obtain an asymmetric and more complex free-form surface of ABAGs than those composed of a uniform reentrant pattern. Discrete Gaussian curvature at each node on a curved surface is computed for quantitatively evaluating the properties of shapes of the obtained surfaces. Possibility of ABAGs as a new design tool is demonstrated by showing that various shapes are generated through large deformation analysis with the forced displacements at the supports.
19 May 2026 in Materials & Design