Aydın DURMUŞ

Aydın DURMUŞ

Auto-generated profile, based on publicly available information

Aydın DURMUŞ

İstanbul Aydin Universitesi

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2019 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
MKMEHMET ALİ KALLIOGLU
MEHMET ALİ KALLIOGLU
ADAydın Durmuş
Aydın Durmuş
HKHAKAN KARAKAYA
HAKAN KARAKAYA
Adem YILMAZAdem YILMAZ
Adem YILMAZ
Panel tilt angles (0°–90°) need to be in a proper position and location to get maximum productivity from solar energy. Values used in solar energy applications are generally computed by (global, diffuse, and direct) variation on horizontal surfaces calculated using isotropic sky and a mean albedo method. Being parallel to the available literature concerning such applications, this study focuses on the optimum solar panel angle. In this study, optimum solar panel angle value by months was determined for three sample provinces (Antalya, Kayseri, and Trabzon) first and North Hemisphere then. Capacity calculation of sample provinces was performed based on monthly, seasonal, and annual angle values and horizontal situation. Monthly and annual optimum angle values for Northern Hemisphere by 1° increase for between the latitudes of 1° N and 65° N. While the panel angle is at the highest level in autumn and winter (November-December-January and February) in annual process, the lowest angle is observed in spring and summer (May-June-July-August). Several different mathematical models have been developed for the sample provinces and Northern Hemisphere. While the variable of 12 different models that were developed for provinces is the Declination (δ) coefficient, the variable of 7 different models that were developed Northern Hemisphere is the latitude (Ø). Regional values in literature with estimation results of models were analyzed based on NASA and PVGIS data color scale. There was created a possibility of comparison by aligning all the optimum solar panel angle values of related location via a scale whose values vary by 1 and 10. Moreover, all the models were verified by statistical analysis methods. R2 (determination coefficient) in 19 different estimation equations is pretty close or equal to 1. However, the best among them is Eq. 32 (0.9979) for sample provinces and Eq. (33) (1) for the Northern Hemisphere; developed models are less-than-stellar. Other statistical data of these equations are MBE (−0.0616), RMSE (1.1176), t-sat (0.1830), Bias (1). For Eq. (32); MBE (1.96), RMSE (2.75), t-sat (8.13), MPE % (3.98), MAPE (5.87), SSRE (0.27), and RSE (0.06) for Eq. (33). The statistical analyzes indicate that all regression models are applicable in Turkey and Northern Hemisphere. Developed all correlations are recommended for academic and industrial users.

8 April 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
AAAli Serkan Avcı
Ali Serkan Avcı
HKHAKAN KARAKAYA
HAKAN KARAKAYA
ADAydın Durmuş
Aydın Durmuş
A prototype of a solar chimney power plant was performed by modeling in this study. The performed prototype was experimentally confirmed. Temperature, velocity, and radiation values were measured to actualize the confirmation. Experimental data that were obtained to determine the performance of solar chimney whose prototype was actualized by the help of measured values were computationally analyzed. The geometry of a solar chimney in the analysis was bidimensionally (2D) drawn on an axis of symmetry. The numerical simulation was analyzed with computational fluid dynamics (CFD) method. Since analysis results show that there is turbulent flow in system (RNG), k-ɛ turbulence model was used. Continuity, momentum, and energy equations were applied to the solar chimney system via the finite volume method. Moreover, DO (discrete ordinates) model was inserted in analysis to evaluate the radiation effect in the collector area. In addition to all these, correlation results between SPSS 17 statistics program and data obtained were evaluated. Finally, with reference to the comparison between numerical and experimental results, data obtained and numerical data are close to each other; the prototype is applicable to the real systems.

6 July 2023 in International Journal of Innovative Engineering Applications
Verified
Journal Article
Closed access
HKHAKAN KARAKAYA
HAKAN KARAKAYA
AAAli Serkan Avcı
Ali Serkan Avcı
AÇAytaç Çeti̇nBaş
Aytaç Çeti̇nBaş
ADAydın DURMUŞ
Aydın DURMUŞ
Bu çalışma, güneş bacasının etkinliğinin arttırılması için iyileştirici düzenlemeler yapılarak deneysel olarak incelenmiştir. Deneysel çalışmada kullanılan güneş bacası daha önce Batman ilinde kurulan 12 m baca uzunluğuna ve 128 m2 kolektör alanına sahip bir prototiptir. Ölçümler için dört farklı coğrafi yönde eş zamanlı sıcaklık, hız ve radyasyon verileri alınarak sistemin ilk hali ile karşılaştırılmıştır. Öncelikle kolektör güneş ışınımı absorbe etmesi için zemini siyah renge boyanmıştır. Daha sonra sistemin gece saatlerinde çalışabilmesi için zemine sıcak su boruları eklenmiş ve türbin giriş hava hızının arttırılması için çelik plakalar ile 4 bölgeye ayrılmıştır. Elde edilen verileri göre kolektör cam yüzeyi altında ortalama sıcaklık artışının 17.4 %, türbin giriş sıcaklığının % 11.2 türbün giriş hızının % 9.94 ve sistem güç çıkışını % 9.4 oranında arttığı gözlemlenmiştir.

30 September 2022 in Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Closed access
ETEmre Turgut
Emre Turgut
ADAydın DURMUŞ
Aydın DURMUŞ
Bu çalışmada, silindirik borunun çeşitli hızlarda döndürülmesi ile akışkana verilen dönme etkisinin ısı transferi, sürtünme faktörü ve etkinlik değerleri üzerinde meydana getirdiği değişimler deneysel olarak araştırılmıştır. Deneyler Reynolds sayısının 500 ile 1800 değerleri arasında ve silindirdik borunun farklı devirlerde döndürülmesiyle gerçekleştirilmiştir. Yapılan deneyler sonucunda, dönme hızındaki artış ile Nusselt sayısı, sürtünme faktörü ve etkinlik değerlerinde artış olduğu görülmüştür. Ayrıca laminar akışta gerçekleştirilen akış gözleme deneyleri ile borunun dönme hızındaki artışın, akışkan üzerine yaptığı etkiler görüntülenmiştir. Bu görüntülerden; laminar akış karakteristiği olan çizgi şeklindeki doğrusal akışın, dönme hızındaki artış ile birlikte türbülanslı akış karakteristiği kazandığı görülmüştür. Elde edilen sonuçların literatürle uyum içinde olduğu sonucu elde edilmiştir.

26 January 2023 in European Journal of Technic
Verified
Journal Article
Open access
PDF file
FGFevzi Gülçi̇mEn
Fevzi Gülçi̇mEn
HKHAKAN KARAKAYA
HAKAN KARAKAYA
ADAydın DURMUŞ
Aydın DURMUŞ
In this study, an original solar air collector model, those of flow environment was fixed with fins for three different angles at the flow channel's height, was designed. Fixing fins in the flow environment lengthens the flow channel since the fins prevent boundary layer formation in a flow cannel. Apart from this, enlarged surface effect exists along with the effects of the fins, the air temperature at the outlet rises. The effects of fixed fins,for 30°, 45° and 60° angles, on the efficiency of collector were investigated. The collectors were made as standard collectors sets with measurements 0.93x1.93 m2 the flow channels of which have been modified. With the help of results obtained from the experiments, efficiency, Nusselt number, Reynold number values were calculated; and they were compared to each other along with the literature. In the collectors designed for this study, it was observed that the heat transfer increased with the decrease of the fins angles.