M. Raghuram

M. Raghuram

Auto-generated profile, based on publicly available information

M. Raghuram

Electrical Engineering, Indian Institute of Technology Banaras Hindu University, 79203 Varanasi, Uttar Pradesh India 221005

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AKAvneet Kumar
Avneet Kumar
YWYi Wang
Yi Wang
Xuewei PanXuewei Pan
Xuewei Pan
MRM. Raghuram
M. Raghuram
SSSantosh Kumar Singh
Santosh Kumar Singh
ATAbhishek K. Tripathi
Abhishek K. Tripathi
In renewable application, a compact high step up DC-DC converter is a prime requirement with continuous input current and lower voltage stress across the devices. In this paper, a high gain DC-DC converter is proposed which utilizes the concept of switched inductor/capacitor and dual switch. The proposed converter has reduced conduction losses, reduced component count, low voltage stress across the devices and therefore compact in size. In addition, the proposed converter has lower inductor current ripple which is suitable for renewable integration. The operation and steady state analysis of the converter is done in continuous current mode. The proposed converter voltage and current stress along with the losses are calculated analytically. Moreover, a comparative analysis is presented to prove the effectiveness of the proposedconverter. Finally, an experimental set up is designed and tested for two distinct power ratings.

31 January 2020 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
AKAvneet Kumar
Avneet Kumar
YWYi Wang
Yi Wang
MRM. Raghuram
M. Raghuram
PNP. Naresh
P. Naresh
Xuewei PanXuewei Pan
Xuewei Pan
XXXiaogang Xiong
Xiaogang Xiong
A high voltage gain inverter is a prime requirement for high voltage power application. Z-source inverter has attracted the attention widely. A lot of efforts has been made to improve the voltage gain with better design. However, still, there is a gap to achieve higher voltage gain with the optimum number of components. In this brief, a quasi Z-source inverter is proposed to achieve higher voltage gain. The proposed inverter utilizes the active switched network along with switched inductor cell. The proposed inverter offers continuous input current and higher voltage gain. The operation and steady-state analysis are presented to derive the voltage gain. A comparative analysis is presented to describe the features of the proposed inverter. Finally, an experimental analysis is conducted to validate the feasibility of the proposed inverter.

13 November 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AKAvneet Kumar
Avneet Kumar
YWYi Wang
Yi Wang
MRM. Raghuram
M. Raghuram
NPNaresh K. Pilli
Naresh K. Pilli
SSSantosh Kumar Singh
Santosh Kumar Singh
XXXiaogang Xiong
Xiaogang Xiong
An interesting feature of Z-source inverter is to provide buck-boost ability in a single stage. However, this concept is most popular in conventional inverters. In a few multilevel inverters, Z-source is utilized to have higher gain along with retaining the advantages of multilevel inverter such as better EMI compatibility, low harmonic distortion, etc. However, the potential of the Z-source concept is not fully exploited in multilevel inverters. To widen the feasibility of Z-source concept in the multilevel inverter, a modular multilevel inverter is considered. In this paper, a generalized switched inductor cell is selected as a Z-source network for integration, however, other Z-source networks such as quasi boost network, quasi switched boost network, two winding coupled inductor network, three winding coupled inductor network, etc. may be used in place of switched inductor cell. The quantitative and qualitative analysis is done for the proposed converter in both the continuous current mode and discontinuous current mode. The analysis shows that a higher voltage gain can be achieved in the discontinuous current mode as compared to the continuous current mode. To control the proposed converter, two new modulation techniques are proposed i.e. full shoot through and upper shoot through/lower shoot through. Finally, the proposed converter is validated experimentally in both the modes and for different modulation techniques.

30 March 2020 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
MRMotiur Reza
Motiur Reza
AKAvneet Kumar
Avneet Kumar
YWYi Wang
Yi Wang
MRM. Raghuram
M. Raghuram
NPNaresh K. Pilli
Naresh K. Pilli
XXXiaogang Xiong
Xiaogang Xiong
Numerous Z-source three phase inverters are developed for realizing higher voltage gain which are suitable to use in hybrid electric vehicle to drive the electric machine. However, higher voltage and current stress of the passive elements and semiconductor devices are the major limitations of the reported Z-source inverters. In this paper, a new quasi switched boost three phase inverter is proposed which has following features: 1) very low continuous input current 2) reduced voltage stress 3) reduced current stress 4) shoot through immunity 5) single stage voltage conversion from DC to AC 6) improved output voltage quality by utilizing higher modulation index. The operation, steady-state analysis and design guidelines for the proposed converter are discussed in detail. To prove the feasibility of the proposed inverter, a comparative analysis is also presented with the state of art converters. An experimental set up is designed on printed circuit board and tested for 400 W power rating.

21 September 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
AKAvneet Kumar
Avneet Kumar
MRM. Raghuram
M. Raghuram
SSSantosh K. Singh
Santosh K. Singh
The continuous current mode (CCM) and discontinuous current mode (DCM) are common inductor current phenomenon seen in various Z-source converters. The CCM is characterized by nonzero rising or falling inductor current while inductor current acquires zero value during DCM. Primarily, DCM occurs in case of low inductor or light load condition. This results in difficult control of the converter due to aberrant voltage at dc terminal. However, in certain dc-ac Z-source converters, the inductor current acquires the profile of an ac load current or become constant in nature. This constant nature of inductor current occurs in case of low duty cycle condition. Constant nature in the current creates similar difficulty in control as DCM. Furthermore, it deteriorates the performance of the converter in terms of total harmonic distortion, high dc voltage ripple, increased dc voltage, and reduced peak ac voltage. This letter explains the nonzero discontinuous inductor current mode, in which constant current phenomenon appears, existence condition and case study along with performance parameters analysis.

6 August 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
MRM. Raghuram
M. Raghuram
AKAvneet Kumar
Avneet Kumar
SSSantosh Kumar Singh
Santosh Kumar Singh
Ultra sparse matrix converter (USMC) is a derived form of Indirect matrix converter (IMC) having less number of switches. Though it has unidirectional power flow capability, it is appropriate candidate for specific applications such as wind energy systems, electrohydrostatic actuator, variable speed drives etc. However, gain of the converter is limited irrespective of various topological and control strategy modifications. Unlike the previous propositions, this paper is primarily focused on integration of switched capacitor boost network within USMC to enhance its gain, while preserving the advantages of USMC. For controlling the proposed converter, a modified space vector modulation technique is also presented in this paper. In order to explore the potential of the proposed converter, analytical expressions are derived. The theoretical findings are further verified using simulation and experimental results.