19 April 2018 in Applied Optics
A confined-doped fiber was fabricated by a modified chemical vapor deposition (MCVD) process based on refractive index matching technology. With theory and experiments, we compared the confined-doped fiber and normal-doped fiber. We found that the confined-doped fiber with a core of 35 μm and 0.07 numerical aperture could achieve single-mode output and improve the beam quality from 2.8 to 1.5 in the fiber laser. Meanwhile, it still possesses high laser efficiency and has good stability of beam quality with the increase in pump power. It suggests that the confined-doped fiber with a MCVD process may be the key material for a high-power fiber laser with excellent beam quality.
9 September 2016 in Optics Express
We proposed and experimentally demonstrated a high temperature fiber sensor using a hetero-structured cladding solid-core photonic bandgap fiber (HCSC-PBGF) for the first time to our knowledge. A hetero-structured cladding solid-core photonic bandgap fiber is designed and fabricated that supports vibrant core mode and cladding mode transmission. Then, an all fiber M-Z interference sensor is constructed by splicing single mode fiber at both ends of HCSC-PBGF without any other micromachining. The transmission characteristics of HCSC-PBGF are analyzed with a full-vector beam propagation method and a full-vector finite element method, and the simulation results are consistent with experiment results. The sensitivity of this fiber sensor is as high as 0.09 nm/°C when operating from room temperature to 1000 °C, and the fringe contrast keeps stable and clear. It is obvious that this all fiber sensor will have great application prospects in fiber sensing with the advantages of a compact structure, high sensitivity, and cost-effectiveness.
31 August 2012 in Optical Materials Express
Various Er/Ce co-doped SiO2-Al2O3-CaO glasses are prepared by the melt-quenching method. The radiation resistance of Er/Ce co-doped glasses is investigated under 5 kGy gamma-ray irradiation. The absorption spectra, up-conversion spectra, fluorescence intensity and lifetime of Er/Ce co-doped glasses before and after irradiation are measured and analyzed in details. The radiation induced absorption (RIA) of the Er/Ce co-doped silicate glasses can be suppressed due to Ce ions co-doping. The fluorescence intensity and lifetime of Er/Ce co-doped glasses have no apparent change after irradiation. Furthermore, the possible mechanism of Ce effect on the radiation resistance improvement is discussed. The result indicates that Er doped glasses with an optimal Ce concentration introduction can be used as active medias for radiation-resistant materials in harsh radiation environments.
17 February 2015 in Optics Letters
We demonstrate, for the first time to our knowledge, the strong recovery of the optical–optical slope efficiency of gamma-ray-irradiated Tm-doped fiber under 793 nm laser diode (LD) pumping. The fiber optical–optical slope efficiency, the fiber cladding absorption spectra, and the fluorescence spectra of the Tm-doped fiber before and after 500 Gy gamma-ray irradiation have been measured for comparison. It is found that the fiber optical–optical slope efficiency had significant degradation from 56.3% to 26.7% after irradiation and recovered to 40.8% after 15 h pump bleaching. Based on comparative analysis of fiber cladding absorption spectra among pristine fiber, irradiation, and bleaching, the reasons for the strong recovery have also been discussed.
7 March 2018 in Optics Express
A heterostructured cladding solid-core photonic bandgap fiber (HCSC-PBGF) is designed and fabricated which supports strong core mode and cladding mode transmission in a wide bandgap. An in-line Mach-Zehnder interferometer (MZI) curvature sensor is constructed by splicing single mode fibers at both ends of a HCSC-PBGF. Theoretical analysis of this heterostructured cladding design has been implemented, and the simulation results are consistent with experiment results. Benefiting from the heterostructured cladding design, an enhanced curvature sensing sensitivity of 24.3 nm/m−1 in the range of 0-1.75 m−1 and a high quality interference spectrum with 20 dB fringe visibility are achieved. In order to eliminate the interference of longitudinal strain and transverse torsion on the result of the curvature sensing experiment, we measure the longitudinal strain and transverse torsion sensing properties of HCSC-PBGF, and the results show that the impact is negligible. It is obvious that this high-sensitivity and cost-effective all fiber sensor with a compact structure will have a promising application in fiber sensing.
1 February 2020 in Journal of Non-Crystalline Solids