24 August 2023 in IEEE Transactions on Industrial Electronics
Model-based strategies are a promising solution to the grand challenge of equipping continuum soft robots with motor intelligence. However, finite-dimensional models of these systems are inherently inaccurate, thus posing pressing robustness concerns. Moreover, the actuation space of soft robots is usually limited. This article aims at solving both these challenges by proposing a robust model-based strategy for the shape control of soft robots with system uncertainty and input saturation. The proposed architecture is composed of two key components. First, we propose an observer that estimates deviations between the theoretical model and the soft robot, ensuring that the estimation error converges to zero within finite time. Second, we introduce a sliding mode controller to regulate the soft robot shape while fulfilling saturation constraints. This controller uses the observer's output to compensate for the deviations between the real system and the established model. We prove the convergence of the closed-loop with theoretical analysis and the method's effectiveness with simulations and experiments.
14 February 2022 in IEEE Robotics and Automation Letters
The intrinsically underactuated and nonlinear nature of continuum soft robots makes the derivation of provably stable feedback control laws a challenging task. Most of the works so far circumvented the issue either by looking at coarse fully-actuated approximations of the dynamics or by imposing quasi-static assumptions. In this letter, we move a step in the direction of controlling generic soft robots taking explicitly into account their underactuation. A class of soft robots that have no direct elastic couplings between the dynamics of actuated and unactuated coordinates is identified. Considering the actuated variables as output, we prove that the system is minimum phase. We then propose regulators that implement different levels of model compensation. The stability of the associated closed-loop systems is formally proven by Lyapunov/LaSalle techniques, taking into account the nonlinear and underactuated dynamics. Simulation results are reported for two models of 2D and 3D soft robots.
10 November 2022 in IEEE Robotics and Automation Letters
Soft robots are intrinsically underactuated mechanical systems that operate under uncertainties and disturbances. In these conditions, this letter proposes two versions of PID-like control laws with a saturated integral action for the particularly challenging shape regulation task. The closed-loop system is asymptotically stabilized and matched constant disturbances are rejected using a very reduced amount of system information for control implementation. Stability is assessed on the underactuated dynamic model through the Invariant Set Theorem for two relevant classes of soft robots, i.e., elastically decoupled and elastically dominated soft robots. Extensive simulation results validate the proposed controllers.
27 February 2024 in IEEE Transactions on Robotics
Suitable representations of dynamical systems can simplify their analysis and control. On this line of thought, this paper aims to answer the following question: Can a transformation of the generalized coordinates under which the actuators directly perform work on a subset of the configuration variables be found? Not only we show that the answer to this question is yes , but we also provide necessary and sufficient conditions. More specifically, we look for a representation of the configuration space such that the right-hand side of the dynamics in Euler-Lagrange form becomes [ IO ] t u, being u the system input. We identify a class of systems, called collocated , for which this problem is solvable. Under mild conditions on the input matrix, a simple test is presented to verify whether a system is collocated or not. By exploiting power invariance, we provide necessary and sufficient conditions that a change of coordinates decouples the input channels if and only if the dynamics is collocated. In addition, we use the collocated form to derive novel controllers for damped underactuated mechanical systems. To demonstrate the theoretical findings, we consider several Lagrangian systems with a focus on continuum soft robots.
11 August 2025 in The International Journal of Robotics Research
Robotics is shifting from rigid, articulated systems to more sophisticated and heterogeneous mechanical structures. Soft robots, for example, have continuously deformable elements capable of large deformations. The flourishing of control techniques developed for this class of systems is fueling the need of efficient procedures for evaluating their inverse dynamics (ID), which is challenging due to the complex and mixed nature of these systems. As of today, no single ID algorithm can describe the behavior of generic (combinations of) models of soft robots. We address this challenge for generic series-like interconnections of possibly soft structures that may require heterogeneous modeling techniques. Our proposed algorithm requires as input a purely geometric description (forward-kinematics-like) of the mapping from configuration space to deformation space. With this information only, the complete equations of motion can be given an exact recursive structure which is essentially independent from (or “agnostic” to) the underlying reduced-order kinematics. We achieve this by exploiting Kane’s method to manipulate the equations of motion, showing then their recursive structure. The resulting ID algorithms have optimal computational complexity within the proposed setting, that is, linear in the number of distinct modules. Further, a variation of the algorithm is introduced that can evaluate the generalized mass matrix without increasing computation costs. We showcase the method applicability to robot models involving a mixture of rigid and soft elements, described via possibly heterogeneous reduced order models (ROMs), such as Volumetric FEM, Cosserat strain-based, and volume-preserving deformation primitives. None of these systems can be handled using existing ID techniques.