1 April 2021 in Journal of Applied Physics
Most acoustic levitation techniques are limited to objects smaller than half the wavelength. To overcome this limit, different strategies have been proposed for suspending macroscopic objects in mid-air. Two approaches to levitate spherical and non-spherical macroscopic objects have been recently presented: the acoustical virtual vortices and the boundary hologram method. However, the former approach places high demands on the available hardware due to the mandatory high switching rate while the latter uses a computationally expensive model that prevents future real-time manipulation. In the present work, we demonstrate the single-beam levitation of a Mie sphere using a 2D transducer array. To achieve this, we employ a computationally fast sound field model based on spherical harmonics expansion. To obtain a suitable array output, we formulate an optimization problem that maximizes the stability of the sphere while keeping the net force balanced. In addition, we prove the local asymptotic stability for the equilibrium position and determine a domain of attraction using Lyapunov-based methods. In experiments, we show that the macroscopic sphere is stably levitated in a twin tuning forks trap, which results from a superposition of two twin trap signatures and a bottle trap signature. This result could open up the possibility of a computationally fast and convenient non-contact manipulation of macroscopic objects by a superposition of holographic elements in future applications.
1 April 2024 in AIP Advances
We present a simple dynamic model for predicting the manipulation behavior of an acoustically levitated sphere. The model allows for the calculation of the sphere position over time, which is demonstrated for two manipulation strategies: a straight motion with a constant manipulation velocity and a straight motion in which the sphere acceleration follows a cosine function. The dynamic model as well as the manipulation strategies is verified experimentally in an acoustic levitator system consisting of an array of 16 by 16 ultrasonic transducers emitting at 40 kHz and an opposing reflector. In this system, a glass sphere of a diameter of 2 mm is manipulated horizontally by controlling the phases of the transducers. The sphere motion is recorded using a high-speed camera, and a tracking algorithm is used for capturing the sphere position over time. Moreover, a model predictive control algorithm is applied on a path-following problem to move the sphere along a given reference trajectory by means of a model-based optimal feedforward control. The proposed dynamic model as well as the methodology presented in this paper enables faster manipulation speeds with reduced oscillations during object movement.
20 May 2025 in Scientific Reports
Sound waves can be used for trapping and manipulating objects immersed in liquids or air. However, most acoustic levitation techniques are limited to particles with diameters much smaller than the acoustic wavelength or require time-consuming optimisation-based methods that hinder the dynamic manipulation of objects. Here, we present an approach based on semidefinite programming to manipulate levitated objects in real time. To demonstrate this technique, a phased array consisting of 256 ultrasonic transducers operating at 40 kHz is used for rotating a non-spherical Rayleigh object or to translate Mie spheres along various trajectories. In contrast to previous optimisation-based approaches, the proposed method can determine the emission phases of each transducer in real time, strongly facilitating the implementation of a model-based closed-loop control in future acoustic levitation systems. This is a fundamental step for manipulating levitated objects precisely and at high speeds.
14 September 2026 in Applied Physics Letters
Acoustic levitation enables contact-free particle manipulation, yet dynamic six-degree-of-freedom (6-DOF) control of non-spherical macroscopic bodies has remained out of reach: rotational and translational dynamics couple non-trivially, and existing demonstrations are restricted to spherical objects or static configurations, or achieve motion by mechanically repositioning the levitator. We demonstrate controlled, stable, and purely field-based 6-DOF manipulation of macroscopic non-spherical rigid bodies on a stationary phased array system, using kinematic feedforward control without any object-specific dynamic model. The architecture combines a Galerkin boundary element model of acoustic radiation forces and torques with our semidefinite programming (SDP) framework for translating optimized pressure fields. Rotational keyframes are obtained offline via nonlinear optimization and stored in a lookup table (LUT) sampling the rotational workspace. SDP then translates the incident pressure field of any LUT entry within the working volume. For a reference trajectory, retrieved keyframes and shifted fields are merged offline into a phase sequence streamed at a 1 ms update rate without re-trapping. Experiments on a wooden cross and stick validate the architecture in the Mie and geometric regimes. Static rotational precision at LUT-sampled poses stays below 0.45° (mean) across all examined axes, with peak deviations up to 2.82° at large angles. Dynamic manipulation at velocities up to 40 mm/s achieves tracking errors below about 3% of the object length. Supplementary material videos show linear and infinity symbol trajectories, continuous 6-DOF maneuvers in a single uninterrupted run, and trajectory composition at non-trivial poses. These results open the route to closed-loop control of macroscopic objects.