Laboratory of Microsystems and Instrumentation (LMI), Biotechnology Research Center (C.R.Bt), Electronic department, Faculty of Technology Sciences, Frères Mentouri University - Constantine 1, 325 Road of Ain El Bey, Constantine 25017, Algeria
Auto-generated profile, based on publicly available information
Lyes Benterrouche
Laboratory of Microsystems and Instrumentation (LMI), Biotechnology Research Center (C.R.Bt), Electronic department, Faculty of Technology Sciences, Frères Mentouri University - Constantine 1, 325 Road of Ain El Bey, Constantine 25017, Algeria
Atmospheric-pressure plasma jet (APPJ) created in helium was extracted far from its electrical discharge ignition using a conductor wire inside a flexible plastic tube. The effects of the geometrical parameters of the setup, helium flow, and the applied discharge voltage on the extracted plasma jet characteristics were investigated. It appears that increasing voltage and/or gas flow leads to the augmentation of the jet length. However, in certain combinations, turbulences of the plasma plume may occur. The turbulences threshold may be shifted by changing voltage or tube diameter. Moreover, increasing the tube and wire length induces more dielectric losses along the tube and adds extra impedance to the reactor leading to jet length retraction.
Atmospheric pressure multi-jet plasma devices have long been considered a promising solution for achieving homogeneous and repetitive surface treatments over large areas. Understanding and addressing the interacting jet’s unique behavior is crucial to reach this goal. This paper contributes to this understanding by presenting a helium-fed, alternating current (AC) powered plasma devices. A honeycomb structure featuring six tubes angled toward a central tube, and a triangular structure consisting of three tubes angled toward each other. These devices were tested, along with derivative models. The study examined the characteristics of the resulting plasma jets, focusing on their dependence on the operational settings, the electrodes configuration, the angle of the tubes relative to the electrodes, and the spatial orientation of the devices. Measurements of the plasma jet length were also conducted under various operating conditions. The results show that the proposed designs delivered longer plasma plumes, as a function of gas flow per tube, compared to the reference single-jet. The collection of jets remained closely packed, avoiding both divergence and coupling, with very little dependence on higher flow rates.
7 November 2025 in Journal of Physics D: Applied Physics
The generation of discharges from a DC voltage source for treating large polluted areas, such as soil, air, and water, has been investigated using an innovative approach. In this study, the device’s effectiveness was assessed using deionized water as a target by analyzing geometric, electrical, and physicochemical parameters, as well as the production of hydrogen peroxide, nitrite, and nitrate. Electrical characterization of the discharge indicates that under the tested conditions, the discharge remains stable throughout treatment, resulting in constant production of species for 30 min. A voltage of 10 kV maximizes the production of reactive oxygen and nitrogen species while ensuring system stability. Treatment lasting 15 min at an inter-electrode distance of 5 mm produced significant concentrations of hydrogen peroxide, nitrite, and nitrate (1.41 mg l −1 for H 2 O 2 , 1.23 mg l −1 for NO 2− , and 2.39 mg l −1 for NO 3− ).