Offshore wind farms are more commonly installed in wind farm clusters, where wind farm interaction can lead to energy losses; hence, there is a need for numerical models that can properly simulate wind farm interaction. This work proposes a Reynolds-averaged Navier–Stokes (RANS) method to efficiently simulate the effect of neighboring wind farms on wind farm power and annual energy production. First, a novel steady-state atmospheric inflow is proposed and tested for the application of RANS simulations of large wind farms. Second, a RANS-based wind farm parameterization is introduced, the actuator wind farm (AWF) model, which represents the wind farm as a forest canopy and allows to use of coarser grids compared to modeling all wind turbines as actuator disks (ADs). When the horizontal resolution of the RANS-AWF model is increased, the model results approach the results of the RANS-AD model. A double wind farm case is simulated with RANS to show that replacing an upstream wind farm with an AWF model only causes a deviation of less than 1 % in terms of the wind farm power of the downstream wind farm. Most importantly, a reduction in CPU hours of 75.1 % is achieved, provided that the AWF inputs are known, namely, wind farm thrust and power coefficients. The reduction in CPU hours is further reduced when all wind farms are represented by AWF models, namely, 92.3 % and 99.9 % for the double wind farm case and for a wind farm cluster case consisting of three wind farms, respectively. If the wind farm thrust and power coefficient inputs are derived from RANS-AD simulations, then the CPU time reduction is still 82.7 % for the wind farm cluster case. For the double wind farm case, the RANS models predict different wind speed flow fields compared to output from simulations performed with the mesoscale Weather Research and Forecasting model, but the models are in agreement with the inflow wind speed of the downstream wind farm. The RANS-AD-AWF model is also validated with measurements in terms of wind farm wake shape; the model captures the trend of the measurements for a wide range of wind directions, although the measurements indicate more pronounced wind farm wake shapes for certain wind directions.
Lateral boundaries can have a large effect on the introduction of external large‐scale structures in limited area models. This case study of a midlatitude cyclone using the advanced Weather Research and Forecasting (WRF) model examines challenges in simulating the storm intensity (characterised by sea level pressure, relative vorticity and wind speed) when a storm centre enters close to the lateral boundary corner in the outermost model domain. A domain shift, nudging techniques, adjustments of the WRF relaxation layer and the influence of the boundary condition update frequency are investigated as possible solutions. The update frequency of the lateral boundary conditions is found to be the most efficient in improving the storm intensity, while adjustments to the relaxation layer or nudging techniques did not overcome the lack of sufficiently updated lateral boundary conditions. This suggests that the modelling of the storm intensification requires sufficiently high temporal resolution.
Wind farm parameterizations (WFPs) are used to include the effects of operating wind farms on near-surface weather variables simulated by weather forecasting. In the first part of this series of papers, we implemented and evaluated two WPFs in the HARMONIE-AROME numerical weather prediction model (Fischereit et al., 2024). In this second part, we apply them in HARMONIE-AROME to perform sequential weather forecasts for Northern Europe with a lead time of 48 hours every 12 hours for two separate months. Combined, the selected summer and winter months are shown to represent the 30-year wind climate (wind speed, wind direction, and stability) in the forecast area reasonably well. A European wind turbine database is constructed as an input for the forecasts by combining eight different sources, harmonizing and filling gaps in the combined data set, filling missing data using random forest-based models, and associating wind farm information with individual turbines using a developed wind farm splitting algorithm. The final product and the algorithms are published for open access. We included scenarios for the forecasts with both on- and offshore turbines, as well as only offshore turbines, and analyzed the impact of wind farms on the hub height wind and near-surface temperature forecast. The forecasts using the WFPs show strong reductions in hub height wind speed near the wind farms. Wind forecast using the WFP of Fitch et al. (2012) compares best with observations for all sites, especially for mast and lidar sites close to wind farms. Onshore turbines have a nonnegligible wake effect both in terms of strength and area, and must, therefore, be included for accurate wind forecasting. The differences in wind speed between forecasts ignoring wind farms and with a WFP included are statistically significant for many on- and offshore farms. The impact of wind farms on near-surface temperature is small on average over the 2 months, but can be considerable during certain periods. The two WFPs cause opposing signs of impact, i.e., warming versus cooling during nighttime.
We study the possible effect of climate change on the extreme wind over Northern Europe using data from 18 models of the Sixth Phase of the Coupled Model Intercomparison Project (CMIP6) and the high-emission SSP585 scenario. We use the spectral correction method to correct the 6-hourly wind speeds and calculate the 50-year wind at an equivalent temporal resolution of 10 minutes, consistent with the International Electrotechnical Commission (IEC) standard. We assess the quality of the CMIP6 wind data during the historical period through comparison to the spatial patterns of the extreme wind in three reanalysis data. We obtain the possible effect of climate change through the comparison of the extreme wind parameters, including the 50-year wind and the 95 %-percentile of the wind speed, and the change in turbine class at 50 m, 100 m and 200 m, between a near future period (2020–2049) and the historic period (1980–2009). The analysis shows an overall increase in the extreme winds in the North Sea and the southern Baltic Sea, but a decrease over the Scandinavian Peninsula and most of the Baltic Sea. However, the analysis is inconclusive to whether higher or lower classes of turbines will be installed in this area in the future.
This study delivers a method and datasets for a global offshore atlas for turbulence intensity (TI) from 10 to 200 m. The method includes both surface-driven three-dimensional boundary-layer turbulence and large-scale two-dimensional turbulence. This systematically includes the effect of large-scale eddies, particularly at weak wind conditions, and hence significantly improves TI in weak to moderate wind conditions. This method describes water roughness length through a dependence on wave age and wind speed, which is suitable for moderate to strong wind conditions. The method also includes stability dependence through the Obukhov length. Based on theories and measurements in literature, algorithms for TI have been calibrated for heights up to 200 m. We use the ERA5 atmospheric and wave data to demonstrate the use of the method and create a global dataset. The results show satisfactory agreement with measurements and data from the literature.