9 February 2026 in IEEE Transactions on Instrumentation and Measurement
Dead-reckoning (DR) algorithms using inertial measurement unit (IMU) and wheel encoders can continuously provide positioning information in scenarios where GNSS signals are lost, providing strong autonomy and playing a critical role in vehicle autonomous navigation. However, a limitation of this method is that errors accumulate over time, resulting in decreasing positioning accuracy and even significant drift during long-term use. This article proposes a learning-based DR algorithm that leverages an encoder–decoder neural network integrating a multimodal attention module (MMAM) and a coarse-to-fine fusion strategy. This approach effectively extracts and fuses motion characteristics from IMU and wheel encoders data, thereby accurately estimating the 3-D vehicle’s instant velocity in the world frame and quantifying its uncertainty. The predicted velocity is then used as the pseudo-measurement in an invariant extended Kalman filter (IEKF), where the uncertainty is directly mapped into a dynamical measurement noise covariance matrix that adjusts the filter update. Real-world experiments demonstrate that our method outperforms existing techniques, reducing average positioning error by approximately 76% compared to the traditional INS + ODO baseline and guaranteeing robust long-term localization in dynamic environments.
19 December 2025 in IEEE Transactions on Industrial Electronics
Inertial navigation systems (INSs) are crucial for autonomous vehicles, yet their accuracy is significantly compromised when using low-cost IMUs. This article proposes a novel multitask learning (MTL) framework, named MTNet, to enhance the accuracy and robustness of pure inertial navigation. Traditional approaches struggle with sensor noise, bias, and dynamic motion complexities and often rely on single-task optimization or simplistic sensor fusion. MTNet innovatively addresses these limitations by simultaneously tackling three interrelated tasks through tensor normal (TN) priors and optimizing feature extraction and knowledge transfer across tasks, improving training efficiency and generalization. Experiments on the KAIST dataset demonstrate that MTNet achieves approximately 25% lower relative trajectory error (RTE) and about 20% lower absolute trajectory error (ATE) compared to state-of-the-art methods. At the same time, we also demonstrate good performance in real-world experiments. The proposed approach highlights the potential of using MTL in addressing complex inertial navigation challenges, offering a robust solution for the localization of autonomous systems.