11 September 2023 in IEEE Antennas and Wireless Propagation Letters
This letter presents a novel full-system communication quality analysis of a wireless power transfer (WPT) and near-field communication (NFC) system. The analysis is conducted via a thoroughly verified broadband equivalent circuit (EC) model of a WPT and NFC system prototype. Such an EC model can accelerate the iterative system design process for systems with interoperating or coexisting WPT and NFC interfaces. The EC model is verified by measurements of a prototype. EC model and measurements agree excellently by comparing impedance parameters, single-sided frequency spectra, and the signal constellation diagram of the NFC tag-to-reader communication signal. The NFC communication quality analysis shows a severe impairment of the NFC tag-to-reader communication by the WPT system.
29 July 2024 in IEEE Journal of Radio Frequency Identification
This work presents, for the first time, a communication and power transfer analysis of interfering wireless power transfer (WPT) and near-field communication (NFC) systems. The communication analysis is conducted by investigating the NFC tag-to-reader communication quality in the digital baseband while being interfered with by WPT. The power transfer analysis is conducted by investigating the maximum power transferred and WPT efficiency η while being affected by the passive loading effects of the NFC prototype system. Inductive decoupling techniques are applied to improve the communication quality and WPT performance. Good communication quality was achieved with at least 60% inductive decoupling. A system-level adjustment of the communication signal demodulation achieved further communication quality improvements, requiring only 15% inductive decoupling. The WPT performance was improved by inductive decoupling, shown by an improved maximum power transfer of up to 27% and an improved WPT efficiency η from 0.42 to 0.67. Additionally, inductive decoupling reduced the chance of the WPT system damaging the NFC system due to too much energy being delivered. These investigations were conducted using time-efficient broadband circuit-level simulations and measurement-verified broadband equivalent circuit coil models.