1 July 2009 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
23 July 2016 in Journal of Geophysical Research: Space Physics
Microchannel plates (MCPs) have been used for many years in space flight instrumentation as fast, lightweight electron multipliers. A new MCP fabrication method combines a glass substrate composed of hollow glass capillary arrays with thin film coatings to provide the resistive and secondary electron emissive properties. Using this technique, the gain, resistance, and glass properties may be chosen independently. Large‐area MCPs are available at moderate cost. Secondary emission films of Al2O3 and MgO provide sustained high gain as charge is extracted from the MCP. Long lifetimes are possible, and a total extracted charge of 7 C/cm2 has been demonstrated. Background rates are low because the glass substrate has little radioactive potassium 40. Curved MCPs are easily fabricated with this technique to suit instrument symmetries, simplifying secondary electron steering and smoothing azimuthal efficiency.
1 September 2008 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
11 January 2017 in IEEE Transactions on Nuclear Science
Microchannel plate (MCP) imaging detectors are widely used in astronomical, biological imaging and remote sensing applications. Photon counting mode imagers with event timing can make use of the high spatial resolution (~10- $50~\mu \text {m}$ ) and very high time resolution (subnanoseconds) of MCP detectors to enhance the performance of such detectors in dynamic environments (for example airborne surveillance of moving objects, LIDAR, and 3-D topographic imaging). The total information that can be collected is limited by the dynamic range of the detector (cross delay line sensors can support detected photon rates up to ~2 MHz over the entire effective area). The ideal sensor for many applications, such as bright images or fast transient behavior, would combine the desirable attributes of high spatial and time resolution for each detected photon with event rates of 100 MHz or more. A new class of MCPs constructed using atomic layer deposition (ALD) on borosilicate glass microcapillary arrays is providing enhancements towards this goal. The ALD MCP manufacturing process decouples the operational functionalization from the substrate fabrication, opening the door for new resistive layers and high secondary emissive materials. Many improvements over traditional MCPs have been demonstrated, including robust substrates able to withstand high processing temperatures, very low background rates, high stable gains, and low outgassing. Higher global photon counting rates can be supported by ALD MCP detector schemes while greatly improving the instrument lifetime. Additionally, the robustness of these MCPs provide them with surface properties capable of supporting the deposition of a wide range of efficient photocathode materials (III-V), which require high processing temperatures (>500 C), to achieve a high quantum efficiency at near UV to near IR wavelengths. Sealed tube sensors incorporating nano-engineered MCPs can support nonproliferation and remote sensing enabling technologies by advancing the state-of the-art single-photon electro-optical remote sensing detectors. The progress of this effort, including results from the deposition of opaque photocathodes directly onto the front surface of the MCPs and the performance and lifetime characteristics of open faced and seal tube detectors, is reported here.
23 November 2015 in Journal of Vacuum Science & Technology A
The technique of atomic layer deposition (ALD) has enabled the development of alternative glass microchannel plates (MCPs) with independently tunable resistive and emissive layers, resulting in excellent thickness uniformity across the large area (20 × 20 cm), high aspect ratio (60:1 L/d) glass substrates. Furthermore, the use of ALD to deposit functional layers allows the optimal substrate material to be selected, such as borosilicate glass, which has many benefits compared to the lead-oxide glass used in conventional MCPs, including increased stability and lifetime, low background noise, mechanical robustness, and larger area (at present up to 400 cm2). Resistively stable, high gain MCPs are demonstrated due to the deposition of uniform ALD resistive and emissive layers on alternative glass microcapillary substrates. The MCP performance characteristics reported include increased stability and lifetime, low background noise (0.04 events cm−2 s−1), and low gain variation (±5%).
1 August 2019 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment