30 April 2018 in Applied Physics Letters
Dislocations that cause a reverse leakage current in vertical p-n diodes on a GaN free-standing substrate were investigated. Under a high reverse bias, dot-like leakage spots were observed using an emission microscope. Subsequent cathodoluminescence (CL) observations revealed that the leakage spots coincided with part of the CL dark spots, indicating that some types of dislocation cause reverse leakage. When etch pits were formed on the dislocations by KOH etching, three sizes of etch pits were obtained (large, medium, and small). Among these etch pits, only the medium pits coincided with leakage spots. Additionally, transmission electron microscopy observations revealed that pure screw dislocations are present under the leakage spots. The results revealed that 1c pure screw dislocations are related to the reverse leakage in vertical p-n diodes.
26 November 2019 in Journal of Applied Physics
The crystallinity and wafer uniformity of and (010) oriented β-Ga2O3 substrates grown by edge-defined film-fed growth (EFG) were investigated by laboratory X-ray diffraction (XRD), synchrotron XRD, polarized Raman spectroscopy, and Raman mapping. XRD results indicated that the EFG substrates had superior crystallinity and high uniformity. Position-dependent XRD ω-rocking curves recorded across a 50.8-mm-diameter substrate had small standard deviations of δF = 1.6% for the full width at half maximum and δP = 2.8% for the peak intensity. The radius of curvature was measured to be 37.7 m for the substrate and 16.4 m for the (010) substrate. The results of synchrotron XRD with various beam sizes suggested that the curving of crystal planes was mainly along the [010] growth direction rather than along the [102] direction. Raman spectra showed that Sn doping up to 3.3 × 1018 cm−3 did not give rise to a notable Raman peak shift. The strain distribution evaluated by Raman mapping implied the high uniformity of both and (010) substrates. From these results, it was concluded that β-Ga2O3 ingots grown by EFG have high crystallinity and can be treated as three-dimensionally uniform bulk crystals in the cases of both undoped and Sn-doped growth.
28 May 2020 in Journal of Applied Physics
Dislocations are major structural defects in semiconductor materials, and they have negative impacts on the performance and reliability of electronic devices. The Burgers vector of a dislocation is one of the most important characteristics that determines its behavior in an operating device. In this study, we used synchrotron x-ray topography (XRT) to perform systematic observations of dislocations in β-Ga2O3, which is a promising wide-bandgap semiconductor for power device applications. By applying the invisibility criterion to dislocation contrasts in XRTs taken at multiple reciprocal lattice vectors , we identified 12 types of Burgers vectors, including 11 types theoretically predicted by Yamaguchi et al. [Superlattice Microst. 99, 99 (2016)] and . Some of these Burgers vectors, such as , and , were confirmed experimentally for the first time.
18 July 2012 in Applied Physics Express
1 November 2016 in Superlattices and Microstructures
2 April 2018 in Journal of Electronic Materials