А.н. Есендосова

А.н. Есендосова

Auto-generated profile, based on publicly available information

А.н. Есендосова

НАО «Карагандинский технический университет им. Абылкаса Сагинова

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2025 in Горный журнал Казахстана
Verified
Journal Article
Open access
АЕА.н. Есендосова
А.н. Есендосова
ААА.к. Абдуллина
А.к. Абдуллина
НМН.с. Малыбаев
Н.с. Малыбаев
В статье представлен анализ заводнения горизонта Ю-2+3 месторождения Жетыбай на основе детального исследования современного состояния развития геологической устойчивости и эффективности системы поддержания пластового давления (ППД). Рассмотрены результаты ранжирования блоков по плотности остаточных извлекаемых запасов, охвату заводнением и текущему коэффициенту извлечения нефти (КИН). Проведен сравнительный анализ заявленного и прогнозируемого КИН, а также в зависимости от коэффициента охвата заводнением по объему и объему обводненности КИН. Выявлены проблемные блоки с низким темпом отбора и высоким потенциалом увеличения добычи нефти за счет уплотняющего бурения добывающих скважин и реконфигурации. Результаты исследования подтверждают необходимость корректировки системы производства для повышения охвата по объемам и достижения проектных показателей добычи нефти Мақалада Жетібай кен орнының Ю-2+3 горизонтының су басу жүйесінің қазіргі жағдайын, геологиялық тұрақтылықтың даму деңгейін және қабаттық қысымды сақтау жүйесінің тиімділігін жан-жақты зерттеу негізінде талдау ұсынылған. Қалдық алынатын қорлардың тығыздығы, су басумен қамту және ағымдағы мұнай алу коэффициенті (АМК) бойынша блоктарды ранжирлеу нәтижелері қарастырылған. Декларацияланған және болжамды АМК арасындағы салыстырмалы талдау, сондай-ақ су басу коэффициентіне байланысты АМК көлемі мен су қанықтылық көлемі бойынша жүргізілген. Өндірудің төмен қарқынымен және бұрғылау ұңғымаларын тығыздау мен қайта конфигурациялау арқылы мұнай өндіруді арттырудың жоғары әлеуеті бар проблемалық блоктар анықталған. Зерттеу нәтижелері мұнай өндірудің жобалық көрсеткіштеріне қол жеткізу үшін өндірістік жүйелерді реттеу қажеттілігін растайды The article presents an analysis of the flooding of the Yu-2+3 horizon of the Zhetybay field based on a detailed study of the current state of geological stability development and the effectiveness of the formation pressure maintenance system (FPM). The results of block ranking by residual recoverable reserves density, flooding coverage, and current oil recovery factor (ORF) are considered. A comparative analysis of the declared and predicted ORF is conducted, as well as its dependence on the flooding coverage coefficient by volume and water cut volume. Problematic blocks with low extraction rates and high potential for increasing oil production through infill drilling of production wells and reconfiguration are identified. The research results confirm the need for adjustment of production systems to increase coverage by volume and achieve the target oil production indicators

25 December 2025 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
JTJavokhir Toshov
Javokhir Toshov
DED.I. Erkinov
D.I. Erkinov
BBB.N. Baratov
B.N. Baratov
AMAlmalyk Branch Of Nust Misis
Almalyk Branch Of Nust Misis
NMN.S. Malybaev
N.S. Malybaev
MRM. Rabatuly
M. Rabatuly
This paper presents a comparative analysis of four main types of well drilling models in heterogeneous geological sections: mechanical-mathematical, energy, kinematic, and empirical. It is shown that each group of models focuses on different aspects of the process: the physics of bit-rock interaction (mechanical-mathematical approach), the energy efficiency of rock mass destruction (energy), the trajectory and movement of the tool (kinematic), as well as statistical patterns and the prediction of complications (empirical). The interaction between the bit and the rock is considered depending on their physical and mechanical properties. A comparison of the rotation speed of the rotor and bit is provided depending on the rock hardness. Based on a review of modern publications and the practical experience of leading service companies (Equinor, Schlumberger, Halliburton), the strengths and weaknesses of each approach are identified, and the need for their integration is substantiated. It is established that the integrated use of models of different classes allows not only to describe and explain phenomena but also to manage the drilling process in conditions of high geological variability.

4 November 2026 in Горный журнал Казахстана
Verified
Journal Article
Closed access
РМРавиль Мусин
Равиль Мусин
ДАД.р. Ахматнуров
Д.р. Ахматнуров
АЕА.н. Есендосова
А.н. Есендосова
NZNail Zamaliyev
Nail Zamaliyev
В статье представлены результаты многолетних комплексных исследований устойчивости горных выработок Карагандинского угольного бассейна на глубинах более 500 м. На основе анализа литолого-стратиграфического строения, структурных особенностей и физико-механических свойств пород обоснованы оптимальные параметры анкерного крепления в условиях сложного напряженно-деформированного состояния массива. Выполнены аналитические расчеты, численное моделирование методом конечных элементов и натурные инструментальные наблюдения. Установлены количественные зависимости между глубиной разработки, свойствами пород и параметрами анкерных систем. Разработанные рекомендации обеспечивают прогнозирование устойчивости выработок, повышение надежности крепи и увеличение срока безремонтной эксплуатации на 25–40% и могут быть использованы при проектировании и эксплуатации шахт в аналогичных условиях Мақалада 500 м-ден асатын тереңдіктерде Қарағанды көмір бассейніндегі тау-кен қазбаларының тұрақтылығы бойынша көпжылдық кешенді зерттеулердің нәтижелері ұсынылған. Жыныстардың литологиялық-стратиграфиялық құрылысы, құрылымдық ерекшеліктері және физика-механикалық қасиеттерін талдау негізінде тау жыныстары массивінің күрделі кернеулі-деформацияланған жағдайларында анкерлік бекітудің оңтайлы параметрлері негізделді. Аналитикалық есептеулер, соңғы элементтер әдісімен сандық модельдеу және натуралық аспаптық бақылаулар жүргізілді. Қазу тереңдігі, жыныстардың қасиеттері және анкерлік жүйелердің параметрлері арасындағы сандық тәуелділіктер анықталды. Ұсынылған ұсынымдар қазбалардың тұрақтылығын болжауға, бекітудің сенімділігін арттыруға және жөндеусіз пайдалану мерзімін 25–40% ұлғайтуға мүмкіндік береді және ұқсас жағдайлардағы шахталарды жобалау мен пайдалануда қолданылуы мүмкін The article presents the results of long-term comprehensive studies on the stability of mine workings in the Karaganda Coal Basin at depths exceeding 500 m. Based on an analysis of lithological-stratigraphic structure, structural features, and physico-mechanical properties of rocks, optimal parameters of rock bolting under complex stress-strain conditions of the rock mass are substantiated. Analytical calculations, fi nite element numerical modeling, and in situ instrumental observations were performed. Quantitative relationships between mining depth, rock properties, and parameters of bolting systems were established. The developed recommendations enable reliable prediction of roadway stability, improvement of support reliability, and an increase in maintenance-free service life by 25–40% and can be applied in the design and operation of mines under similar conditions

31 January 2023 in Горный журнал Казахстана
Verified
Journal Article
Closed access
АЕА.н. Есендосова
А.н. Есендосова
АМА.д. Маусымбаева
А.д. Маусымбаева
FIFarida Farida Issatayeva
Farida Farida Issatayeva
ККК.б. Каскатаева
К.б. Каскатаева
В статье показаны результаты детального изучения минерального состава вмещающих пород месторождения Алайгыр. Представлены характеристика вещественного состава исследованных проб руды, гранулометрический состав дробленого материала с распределением элементов по классам крупности, а также минеральный и химический состав. Был выполнен фазовый анализ серебра и свинца в рудах. Рассмотренный вещественный состав руд показывает связь рудообразования с разновозрастными отложениями. Пересечение рудными телами вулканогенных и осадочных толщ позволяет определить возраст и условия формирования оруденения, что дает возможность более детально изучить полиметаллические месторождения для разработки, доработки и эксплуатации месторождений свинца и цинка. The article shows the detailed results of studying the composition of the host rocks of the Alaigyr deposit. The characteristics of the studied composition of the studied ore samples are presented and the granulometric composition of the crushed material is also sent with emissions of elements by size class, mineral and chemical composition, an analysis of silver and lead in the ore was performed. The exclusively included composition of ore formation shows the relationship of ore formation with deposits of different ages. The intersection of the ore bodies of volcanogenic and sedimentary strata makes it possible to determine the age and conditions of formation of the bodies, which makes it possible to study polymetallic deposits in more detail for the development, refinement and exploitation of the deposit of lead and zinc.

10 October 2025 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
Verified
Journal Article
Closed access
AUAbylkas Saginov Karaganda Technical University
Abylkas Saginov Karaganda Technical University
BKB. Khussan
B. Khussan
AYA.N. Yesendosova
A.N. Yesendosova
AKA.A. Kenetaeva
A.A. Kenetaeva
MRM. Rabatuly
M. Rabatuly
IUIslam Karim Tashkent State Technical University
Islam Karim Tashkent State Technical University
A sample of iron ore from the Kharganat deposit was crushed to under 3 mm and subjected to dry magnetic separation, yielding a concentrate with 60.28% iron content and 98.92% metal recovery. When the sample was further crushed to under 1 mm and reprocessed, a concentrate with 66.7% iron content and 95.88% metal recovery was obtained. Through wet magnetic separation, a concentrate with 67.71% iron content and 96.9% metal recovery was produced. The tests confirmed that the most effective method was wet separation after crushing to under 1 mm and grinding for 40 minutes. In terms of beneficiation technology for the deposit, two process schemes—dry and wet magnetic separation—were developed. It was recommended that dry beneficiation be used in production instead of the water-intensive wet method. The sulfur and phosphorus content in the technological samples met standard requirements. Both previous studies and new exploration results were used in the resource estimation. It was confirmed that using a 10% cutoff grade for resource calculation is economically efficient. The minimum thickness of ore bodies was set at 2.0 meters, and the maximum thickness of waste rock at 4.0 meters. Resources were classified into Measured (B), Indicated (C), and Inferred (P1) categories. The geological structure of the deposit is simple, with a stable ore body distribution. The ore body thickness ranges from 5 to 40 meters, with an average of 23 meters. The deposit is suitable for open-pit mining, and no water drainage issues are expected in the initial years. It is planned to build an open-pit mine with an annual capacity of 500,000 tons of ore, with the cost of mining one ton of ore estimated at 4,312.8 MNT.

8 September 2026 in Горный журнал Казахстана
Verified
Journal Article
Closed access
СШС.н. Шапошник
С.н. Шапошник
ZAZhanar Assanova
Zhanar Assanova
АЕА.н. Есендосова
А.н. Есендосова
НКН.б. Керімбаева
Н.б. Керімбаева
В статье представлены результаты комплексной геомеханической оценки массива горных пород Иртышского месторождения, направленной на обоснование безопасной и эффективной разработки рудных залежей. Исследованы физико-механические свойства пород и руд, выполнен анализ структурной нарушенности массива по данным натурных обследований с использованием метода линейных замеров (Scanline Mapping) и программного комплекса Dips. Выделены основные системы трещин, определены показатели качества массива (RQD), выполнено геомеханическое районирование с выделением трех участков и литологических доменов. Установлены закономерности изменения устойчивости массива в зависимости от литологического состава и степени трещиноватости. Полученные результаты могут быть использованы при геомеханическом моделировании, прогнозировании устойчивости горных выработок и выборе рациональных параметров крепления Мақалада Ертіс кен орнының тау жыныстары массивіне жүргізілген кешенді геомеханикалық бағалау нәтижелері ұсынылған. Зерттеудің мақсаты – кен денелерін қауіпсіз әрі тиімді игеруді ғылыми тұрғыдан негіздеу. Тау жыныстары мен кендердің физикалық-механикалық қасиеттері зерттеліп, табиғи бақылаулар барысында қолданылған Scanline Mapping сызықтық өлшеу әдісі мен Dips бағдарламалық кешені негізінде массивтің құрылымдық бұзылуы талданды. Нәтижесінде негізгі жарықшақ жүйелері анықталып, массив сапасының көрсеткіштері (RQD) есептелді, үш геомеханикалық аудан және литологиялық домендер бөлінді. Массивтің тұрақтылығының литологиялық құрам мен жарықшақтану дәрежесіне тәуелді өзгеру заңдылықтары айқындалды. Алынған нәтижелер геомеханикалық модельдеу, тау-кен қазбаларының орнықтылығын болжау және бекіту параметрлерін оңтайлы таңдауда қолданылуы мүмкін The article presents the results of a comprehensive geomechanical assessment of the rock mass at the Irtysh deposit aimed at substantiating the safe and effi cient mining of ore bodies. The physical and mechanical properties of rocks and ores were investigated, and the structural disturbance of the rock mass was analyzed based on fi eld observations using the Scanline Mapping method and the Dips software package. The main joint sets were identifi ed, the Rock Quality Designation (RQD) was determined, and geomechanical zoning was performed with the delineation of three zones and lithological domains. The relationships between rock mass stability, lithological composition, and fracture intensity were established. The obtained results can be applied in geomechanical modeling, stability prediction of underground excavations, and the selection of optimal ground support parameters