Fifth-generation (5G) communication systems require reconfigurable reflectarrays with multi-bit phase control and dual polarization regulation to facilitate flexible beam scanning and polarization matching between the transmitter and receiver. This paper presents a 2-bit reconfigurable reflectarray with two orthogonal linear polarization channels that can operate independently. Each unit cell comprises two active layers combined with a metal ground layer and includes four p–i–n diodes. The bias lines are positioned on the backside of the active layers to eliminate the need for an additional feed layer or multilayer bonding. A reflectarray antenna consisting of 16 × 16 unit cells is designed, and simulations are performed to verify the design. Measurements demonstrate that the antenna possesses a wide beam scanning range of ±60°. The proposed design offers flexible polarization radiation modes, and the operational frequency range falls within the n78 frequency band of 5G communication.
2 December 2024 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a switchable frequency-selective surface (FSS) that achieves switching of four transmission states in Ku-band. The aperture-coupled patch resonator (AC-PR) structure is adopted to achieve spatial filtering with high selectivity. Different patch resonators are loaded on the top and bottom layers, and four p-i-n diodes are embedded in each layer. By applying different bias voltages to the top and bottom layers respectively, the frequency reconfigurable transmission of four states across 13.2-16.7 GHz can be achieved. A 160 mm×160 mm FSS sample is fabricated and measured. The insertion loss of the four transmission states is between 1.5 and 3.6 dB. It has a dual-polarized function and 30° incident angle stability. This work verifies the possibility of using switchable FSS to realize frequency hopping transmission in Ku-band for the first time. It expands the application scenario of integrating active FSS with Ku-band antennas.