The Sichuan Basin is a prime gas-producing basin in China. Besides the giant Neoproterozoic Weiyuan gas field discovered in the central paleo-uplift, an extra giant gas reservoir in the Cambrian in this area has been confirmed in recent years. Although the lower Paleozoic in the southwest (Weiyuan area) is normally pressured, it is overpressured in the central area (Moxi–Gaoshiti area). Combined with the seal distribution, five pressure systems, including three overpressure systems, can be divided based on drill-stem test, mud weight, and sonic transit time data. Overpressures appear at depth interval of 1500 to 4900 m (4921 to 16,076 ft), approximately. Benefiting from the good sealing capacity of the gypsum in the Upper and Middle Triassic, high overpressure (pressure coefficient [r] > 2.0) has been preserved in the Lower Triassic, and the Upper Triassic and Cambrian are moderately overpressured (1.3 < r < 1.7). Mechanisms for various overpressure systems are different. Abnormally high sonic transit time in the Permian indicates disequilibrium compaction overpressure. The analyses of sonic transit time–effective stress suggest that disequilibrium compaction is the primary mechanism for the overpressure in the Upper Triassic Xujiahe Formation, but the Cambrian overpressure system is predominantly associated with fluid expansion, which mainly resulted from gas generation. Furthermore, we consider that the late thermal cracking of oil to gas is a key factor for gas and overpressure preservation in old strata. The high overpressure in the Lower Triassic marine carbonate rocks was caused by oil cracking and gypsum dehydration mechanisms. Combining the origin analysis with the burial and hydrocarbon generation histories, we constructed the Cambrian pore pressure evolution model, which is characterized by roughly normal pressure before 200 Ma, overpressuring from 200 to 90 Ma, and overpressure releasing since 90 Ma.
1 October 2016 in Journal of Petroleum Science and Engineering
Temperature and pore pressure are two important physical fields in sedimentary basins. Temperature controls the distribution characteristics and formation of overpressures. Firstly, the relationship between the measured temperature and pore pressure was analyzed. Secondly, temperature‐pressure relationship for sealed formation water was modeled in laboratory. The maximum paleo‐temperatures for different regions in the Paleo‐Uplift were reconstructed by using vitrinite reflectance, and then the effect of temperature on the overpressure distribution characteristics was analyzed. Finally, the impacts of temperature on the overpressure generation through oil cracking and disequilibrium compaction were discussed. Based on the study results, a positive correlation between the temperature and pressure in the Central Paleo‐Uplift was discovered. When the pressure is greater than 15 MPa, it would change 1.076 MPa as temperature change 1 °C in an absolutely sealed condition. The difference in temperature reduction is the primary cause for various intensity of pressure within the Central Paleo‐Uplift. Besides that, lateral transfer and leakage of pressure must occur. Overpressure in the Lower Paleozoic, generated by oil cracking, formed during from 180 to 110 Ma and redistributed in 90 Ma. Temperature effect on disequilibrium compaction overpressure is negligible.