1 January 2025 in Environmental Research Communications
This article presents the design, construction and field test of an experimental prototype of a low-cost hydrokinetic turbine technology made of local materials and e-waste components. The aim of this study is to investigate the performance of the turbine when subjected to field conditions in low flow velocity rivers. The research and development (R&D) involve the use of e-waste boat motor and locally available materials to develop a modular hydrokinetic turbine for generation of electricity using kinetic energy of rivers. A decommissioned boat motor with a 0.24 m diameter rotor is operated as a turbine. A shroud for flow acceleration was developed from 1.5 mm thick stainless-steel plates and a support structure constructed using angle lines. The field test results of the prototype generated about 11.543 ± 0.021 W and 37.129 ± 0.021 W or (equivalent of 0.011543 kWh and 0.037129 kWh) when operated at an approach flow velocity of 0.8 m s−1 and 1.2 m s−1 respectively. The wire to water ratio was determined instead of the Cp and the turbine achieved an overall wire to water efficiency of 0.99 and 0.95 respectively. This prototype technology can sustainably provide 24 h energy, sufficient to charge batteries in the rural areas and also provide opportunities within the community such as mobile charging points. An upscaled version of this low-cost technology can be adaptable in rural off-grid communities to enhance the access to electricity in developing countries.
4 December 2025 in Journal of Hydrology
3 May 2022 in Aquatic Sciences
Fish body geometry is highly variable across species, affecting the fluid-body interactions fish rely on for habitat choice, feeding, predator avoidance and spawning. We hypothesize that fish body geometry may substantially influence the velocity experienced by fish swimming. To test this hypothesis, we built nine full-scale physical prototypes of common freshwater fish species. The prototypes were placed in a large laboratory flume and upstream time-averaged velocity profiles were measured with increasing distance from the anterior-most location of each body. The measurements revealed that the body geometry can have a significant influence on the velocity profile, reducing the flow field at a distance of one body length upstream of the fish. Furthermore, it was found that the upstream velocity profiles from the nine fish species investigated in this study can be normalized to a single fit curve based on the freestream velocity and fish body length under subcritical flow conditions. These findings are significant, because they show that conventional point velocity measurements overlook the reducing effect of the fish body on the upstream flow field, creating a systematically biased representation of the velocity experienced by fish in subcritical flowing waters. This bias is illustrated by velocity field maps created with and without the presence of the physical models for three different fish species. Finally, we provide an example of how point velocity measurements can be recalculated to provide upstream velocity field maps closer to “the fish’s perspective”.
10 April 2026 in Advances in Water Resources