2 November 2021 in Mathematical Problems in Engineering
The plastic deformation produced in the machining process can cause residual stress. As an effective way to control the residual stresses, the cryogenic process is used in modern industries such as aerospace, automobile, and shipping industry. Focusing on the minimization of surface stress in the cryogenic process of pure iron, the Taguchi design is used in this paper. The effect of cryogenic temperature (77–193 K), holding time (8–24 H), cooling rate (2–6 K/min), and warming-up rate (0.5–1.5 K/min) on surface residual stress is discussed and the optimal combination of cryogenic parameters is obtained using signal-to-noise (S/N) ratios. To overcome the weakness of the Taguchi method that cannot calculate stresses, an exponential model to predict residual stresses considering cryogenic parameters is developed. The coefficients of this mathematical model are obtained using multilinear regressive analysis based on the database of the Taguchi experiment. After this, the optimization process is conducted with this model using the genetic algorithm (GA). The optimized results using both ways coincide with each other. The optimal cryogenic parameters are obtained, i.e., cryogenic temperature of 193 K, holding time of 24 h, cooling rate of 2 K/min, and warming-up rate of 0.5 K/min. When the optimum cryogenic parameters are used, the surface residual stress is reduced by 42.9% in the cutting direction and 46.2% in the feeding direction. The method can be applied to the actual machining engineering to realize the low-stress control on the cutting surface.
24 August 2022 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
There is still gap for predicting the residual stress distribution of machined surface for curved components effectively in academic research. In order to obtain the spatial distribution of surface residual stress for such workpieces, a new approach which considering three-dimensional (3D) finite element (FE) model at sample points and corresponding mapping techniques is proposed. The machining of curved component is equivalent to turning of a series of continuous points. According to the idea of discrete method, regular cutting positions are chosen. A 3D FE model is then established for predicting residual stress profile in these fixed turning positions according to the real cutting parameters. These simulated stress profiles act as the given information for stress field construction. For any point in the stress layer area, the stresses are acquired by using linear interpolation of the stress information and then transformed into the global system. Relevant mathematical algorithms are developed for mapping predicted residual stresses into the target component by secondary development of the Abaqus software. Its innovation lies in that the non-uniformity of spatial stress field which is caused by changing machining-parameters and tool-workpiece contact is modeled. The spatial distribution of surface stresses for a turned spherical component made of pure iron are given as an example and analyzed in detail. The analysis shows that cutting and feeding stresses on the spherical surface first increase rapidly, then slowly increase along the generatrix. Moreover, predicted residual stresses are in accordance with the X-ray diffraction measured ones, which confirms the reliability of the developed model to predict stress distribution of curved components after turning process.