In order to improve runnability of the production process of combustible cartridge case(CCC), the effects of pre-mixed complexes of polyamideamine-epichlorohydrin (PAE) and polyvinyl alcohol (PVA) on wet-web strength and dry strength of nitrocellulose fibers (NC) - softwood bleached kraft pulp (SwBKP) sheets were investigated in terms of types of PVA. It was found that the addition of PAE or PAE-PVA complexes increased wet web tensile strength and dry strength of NC-SwBKP sheets. In order to improve the wet web tensile strength, the PVA with a higher degree of saponification and with a higher molecular weight had to be chosen for the PAE-PVA pre-mixed complexes. For the dry strength of NC-SwBKP sheets, the PVA with a higher degree of saponification resulted in a higher strength. Concerning the strength improvement of NC-SwBKP sheets, the degree of saponification of PVA was more important factor than the molecular weight of PVA. It is speculated that PAE-PVA pre-mixed complexes improved wet web tensile strength and dry strength of NC-SwBKP sheets by increasing interactions between fibers and by improving formation of sheets.
The oxygen evolution reaction (OER) is a key anodic counter‐reaction for electrochemical production of fuels and chemicals. It is hindered by sluggish four‐electron transfer kinetics requiring highly oxidative operating potentials to achieve commercially relevant rates. NiFeO x H y electrocatalysts are among the most promising for OER in alkaline electrolytes. The Ni(OH) 2 /NiOOH redox couple has been reported as the active phase in Ni‐based electrocatalysts; however, its activity is often hindered by deactivation arising from the formation of OER‐inactive insulating species. Limited strategies exist for mitigating this deactivation. This study aims to address this by interrogating the evolution of OER active sites as a function of precatalyst composition and structural properties using a series of layered, crystalline Ni‐based Ruddlesden–Popper (RP) oxides (A 2 NiO 4+δ ). In situ evolution of the active NiO x H y surface is probed through Ni‐site OER turnover frequency analysis, and electrochemical impedance spectroscopy coupled with scanning transmission electron microscopy. We show that the stability of layered nickelate oxide electrocatalysts is governed by the dynamic competition between cation dissolution and Ni‐site reversibility, which can be tuned through the A‐site composition of RP oxides. These findings yield insights toward engineering OER oxide precatalysts that optimize the stability of in situ‐generated OER active phases.