The industrial development and the advance of the primary sector in Brazil generated an increase in the cases of structures damaged by sulfate attacks. A reduction in material lifetime is one of the most costly factors in the construction field. Therefore, it is necessary to understand the sulfate attack mechanism in order to provide repairs and prevent further attacks. This article aims to understand how the environmental condition and the material properties influence the attack’s severity. Hence, it combined an experimental program and analytical model to measure those parameter effects. Experiments show that cement with a higher amount of tricalcium aluminate (C3A), as the CP V ARI, presented a more pronounced deterioration. Visual changes such as cracking, crystallization of expansive products and a complete disintegration were also observed. In addition, loss of resistance occurred in the specimens with low slag content. Moreover, the model is useful to predict the delamination depth and to identify the most critical factors influencing the attack through sensitive analysis. Its results were compared with real cases based on literature and verifying the model reliability.
1 January 2024 in REM - International Engineering Journal
At high temperatures, concrete may exhibit adverse mechanical behavior that compromises the safety of structures. Thus, it is necessary to study and develop concrete that can obtain greater performance in situations of exposure to high temperatures. In this regard, the present study investigates the replacement of 25% of sand by expanded vermiculite in different types of concrete and its performance when subjected to room temperature and punctual temperatures, of little content in literature, such as 200°C, 400°C and 800°C. This study also innovates by proposing the evaluation of prototypes exposed to high temperatures exclusively according to the perspectives of Brazilian technical standards, without resorting to international guidelines. Thus, the consistencies of the mixtures were determined and analyzed, as well as physical and mechanical tests that were carried out with the produced concrete. Among the results found are: vermiculite reduces the workability of the concrete mixture; vermiculite is not recommended for high-performance concrete, as it can significantly reduce its mechanical properties; in general terms, concrete that has a design strength of 50 MPa benefits from replacing the fines aggregate with vermiculite. From 400°C of exposure, all of the concrete samples showed cracks. The spalling phenomenon was also noticed in some specimens. The developed concrete samples cannot be characterized as lightweight concrete according to Brazilian standards, but o can be recommended as structural concrete given that their apparent specific mass is greater than 2000 kg/m3.
21 August 2020 in Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782)
Accurately forecast performance and durability is a critical issue for improving the design of new and existing pavements. The poor pavement performance increases traffic congestion, compromises safety, and raises maintenance costs due to frequent repairs. The resilient modulus is one of the most critical unbound material property inputs in several current pavement design procedures. Recent studies have addressed the problem of resilient modulus prediction using different methods, including computational intelligence approaches. In this paper, a hybrid intelligent system called ANFIS (Adaptive Neuro-Fuzzy Inference System) is used for predicting the resilient modulus from an experimental database of 270 distinct compositions. ANFIS achieved superior performance when estimating the resilient modulus of bituminous mixes, which can potentially save laboratory resources.
This study concerns the numerical simulation of effective elasticity modulus of lightweight concrete by means of Asymptotic Expansion Homogenization. Taking as input data the elastic properties of the aggregate and mortar employed in the concrete composition, it is possible to evaluate a homogenized elastic tensor for the resulting material. The present work deals with lightweight concretes made of the same mortar and five families of low density aggregates, with varying aggregate volumetric fractions. The multiscale model employed to represent the geometric and mechanical properties of the concrete is characterized by a great deal of simplicity. The validation of the adopted procedure consisted of comparisons of the numerical results with experimental measurements, showing good agreement.
1 January 2022 in Revista IBRACON de Estruturas e Materiais
Concrete is a widespread material all over the world. Due to this material’s heterogeneity and structural complexity, predicting the behavior of concrete structures under extreme environmental conditions is a very challenging task. High temperatures lead to microstructural changes which affect the macrostructural performance. In this context, computational tools that allow the simulation of structures may assist the analysis, by reproducing varied situations of thermal and mechanical loading and boundary conditions. In order to contribute to this scenario, this study proposes a numerical methodology to simulate the thermomechanical behavior of concrete under temperature gradients, through inverse analyses and a user subroutine implemented in Abaqus software. Thermal loading effects were considered as loading data for a damage model. Experimental data available in the literature was adopted for adjustment and validation purposes. The preliminary results presented herein encourage further improvements so as to allow realistic simulations of such an important aspect of concrete’s behavior.