Loic Vincent

Loic Vincent

Auto-generated profile, based on publicly available information

Loic Vincent

CIME Nanotech, Grenoble INP, Grenoble, France

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MMMarc Margalef-Rovira
Marc Margalef-Rovira
JLJose Lugo-Alvarez
Jose Lugo-Alvarez
ABAlfredo Bautista
Alfredo Bautista
LVLoic Vincent
Loic Vincent
SLSylvie Lepilliet
Sylvie Lepilliet
PFPhilippe Ferrari
Philippe Ferrari
This article focuses on the design of high-performance coupled slow-wave coplanar waveguide (CS-CPW) in CMOS technologies for the millimeter-wave (mm-wave) frequency bands. First, the theory as well as the electrical model of the CS-CPW are presented. Next, the analytical approach for the calculation of the model parameters is discussed. Then, by using the developed model, two mm-wave backward directional 3-dB couplers are designed in a bipolar complementary metal-oxide-semiconductor (BiCMOS) 55-nm technology for 120- and 185-GHz operation, respectively. Simulation and experimental results demonstrate that the use of the CS-CPW concept leads to state-of-the-art performance, with a good agreement between the analytical model, electromagnetic simulations, and measurement results.

14 May 2020 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FCFlorent Cilici
Florent Cilici
MBManuel J. Barragan
Manuel J. Barragan
ELEstelle Lauga-Larroze
Estelle Lauga-Larroze
SBSylvain Bourdel
Sylvain Bourdel
GLGildas Leger
Gildas Leger
SMSalvador Mir
Salvador Mir
In this article, we leverage the power of machine learning algorithms to propose a test methodology for millimeter-wave (mm-wave) integrated circuits. The proposed test strategy is based on identifying the main process degradation mechanisms in a particular device under test (DUT) and then designing dedicated process monitor circuits to characterize this degradation and infer the DUT performance. The resulting process monitors do not load or couple to any of the DUT nodes, and the methodology can be adapted to any mm-wave device without complex codesign. The proposed test methodology is illustrated on a set of 21 fabricated samples of a 65-GHz PA designed in STMicroelectronics 55-nm CMOS technology.

8 May 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
MMMarc Margalef-Rovira
Marc Margalef-Rovira
ASAbdelhalim A. Saadi
Abdelhalim A. Saadi
LVLoic Vincent
Loic Vincent
SLSylvie Lepilliet
Sylvie Lepilliet
CGChristophe Gaquiere
Christophe Gaquiere
PFPhilippe Ferrari
Philippe Ferrari
This article presents the design, experimental results, and modeling of an inversion-mode CMOS varactor integrated in the STMicroelectronics 55-nm BiCMOS technology. The device was characterized from 1 to 325 GHz, demonstrating high-quality factor at millimeter-waves. For instance, a quality factor of 7 at around 190 GHz for a tuning ratio (Cmax/Cmin) greater than 4 was measured. This performance overpasses that of accumulation-mode varactors usually provided in CMOS technologies design kits, for frequencies beyond about 100 GHz. In addition, a small-signal electrical model is provided from 100 to 250 GHz.

12 July 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ASAbdelhalim A. Saadi
Abdelhalim A. Saadi
MMMarc Margalef-Rovira
Marc Margalef-Rovira
OOOlivier Occello
Olivier Occello
LVLoic Vincent
Loic Vincent
SLSylvie Lepilliet
Sylvie Lepilliet
PFPhilippe Ferrari
Philippe Ferrari
The design and experimental results of millimeter-wave bandpass filters (BPFs) implemented in 55-nm BiCMOS technology and operating around 120 GHz are presented in this article. Slightly modified coupled line filters' structures are used in the designs. It allows generating the transmission zero at the upper stopband, leading to the selectivity of enhanced filters. The coupled line structure is implemented in two technologies, microstrip coupled lines and coupled slow-wave (SW) coplanar waveguides (CS-CPWs). The latter shows more design flexibility, allowing to reach a better filtering performance than the microstrip filters, i.e., better in-band flatness and higher selectivity. Good agreement is achieved between simulation, modeling, and measurement results. Also, the overall length of the filter based on CS-CPWs is smaller as compared to the filters based on the microstrip lines, thanks to the SW propagation.

17 October 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FCFlorent Cilici
Florent Cilici
MMMarc Margalef-Rovira
Marc Margalef-Rovira
ELEstelle Lauga-Larroze
Estelle Lauga-Larroze
SBSylvain Bourdel
Sylvain Bourdel
GLGildas Leger
Gildas Leger
MBManuel J. Barragan
Manuel J. Barragan
State-of-the-art nanometric fabrication processes enable the integration of monolithic millimeter-wave (mm-wave) circuits. However, nanometric technologies are prone to process variations that may significantly impact the performance of the fabricated mm-wave circuits and dramatically reduce the fabrication yield. In order to improve the fabrication yield, extensive resources are required for tuning the functionality of each fabricated die in the production line, especially in the mm-wave domain. In this work, we implement and experimentally validate a machine learning-based calibration strategy for mm-wave circuits that significantly simplifies this tuning process. A machine learning algorithm is employed to predict the optimum values of a set of on-chip tuning knobs based on nonintrusive measurements provided by embedded process monitor circuits. The proposed technique is demonstrated on a 69-GHz power amplifier (PA) with one-shot calibration capabilities integrated in STMicroelectronics 55-nm CMOS technology. The experimental results on a set of 39 fabricated samples demonstrate the feasibility and performance of the proposed machine learning-based calibration for yield recovery and performance recentering applications.

25 June 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
SISana Ibrahim
Sana Ibrahim
AAAli Al-Shakoush
Ali Al-Shakoush
SSSerge Subias
Serge Subias
LVLoïc Vincent
Loïc Vincent
MBManuel Barragan
Manuel Barragan
SBSylvain Bourdel
Sylvain Bourdel
In this study, a harmonic-rejection N-path mixer is designed, implemented, calibrated, and measured. The proposed mixer features a wide bandwidth suitable for low-power multi-standard RF front-end receivers while keeping low complexity by opting for only 5 paths rather than 10 and only one stage to perform harmonic rejection up to the $7^{th}$ local oscillator (LO) harmonic. This work employs a calibration strategy to prevent mismatches due to the fabrication process from affecting the system performance. The 0.17-1.2-GHz RF front-end mixer is fabricated in a 28-nm FDSOI technology. Measurements show a harmonic rejection higher than 45 dB for the $3^{rd}$ , $5^{th}$ , and $7^{th}$ LO harmonics, 13 dB gain, 13.3 dB NF, $-$ 3.5 dBm in-band IIP3. The total power consumption is only 22 mW for a surface area of 0.62 $\times$ 0.22 $mm^{2}$ .