The use of biomass pellets as a source of renewable energy has increased in recent times. However, pellet storage during transportation can compromise their properties, due to fluctuating temperature and humid environments. Here, we show that extended storage of one month at 40 °C and 85% relative humidity causes significant biomass pellet degradation. This was evidenced by higher pellet porosity, weight gain, increased inclusion body formation and creation of an internal network of cracks. We quantify the inclusion and pore growth processes at the surface and within the pellets, which has implications for subsequent thermochemical conversion. The global bioenergy transition may depend upon biomass pellets, and this study shows that storage conditions are critical in the supply chain, so to maintain their quality. Without the development of stronger policies to avoid premature degradation of biomass pellets, they may not realize their full potential as a bioenergy source.
Biomass pellets provide a pivotal opportunity in promising energy transition scenarios as a renewable source of energy. A large share of the current utilization of pellets is facilitated by intensive global trade operations. Considering the long distance between the production site and the end-user locations, pellets may face fluctuating storage conditions, resulting in their physical and chemical degradation. We tested the effect of different storage conditions, from freezing temperatures (−19 °C) to high temperature (40 °C) and humidity conditions (85% relative humidity), on the physicochemical properties of untreated and torrefied biomass pellets. Moreover, the effect of sudden changes in the storage conditions on pellet properties was studied by moving the pellets from the freezing to the high temperature and relative humidity conditions and vice versa. The results show that, although storage at one controlled temperature and RH may degrade the pellets, a change in the temperature and relative humidity results in higher degradation in terms of higher moisture uptake and lower mechanical strength.
20 February 2025 in Journal of Analytical and Applied Pyrolysis
An urgent ecological issue is the threat posed by invasive species, which are becoming more widespread especially in Africa. These encroachments damage ecosystems, pose a threat to biodiversity, and outcompete local plants and animals. This article focuses on converting Acacia Mellifera from Namibia, commonly known as encroacher bush (EB) into high-quality drop-in intermediates for the chemical and transport industry via hydrothermal liquefaction (HTL). HTL tackles the growing need for sustainable energy carriers while simultaneously halting the spread of the invasive species. A surface response methodology was used to optimize the HTL process for the following operational conditions: temperature (250–340 °C), residence time (5–60 min) and catalyst loading (0–10 wt%). The catalyst of choice was determined after evaluating the energy recovery (ER) of four different catalysts (Zeolite, La2O3, Hydrotalcite, Ni/SiO2–Al2O3) under the same HTL operational conditions. The results indicate that the addition of hydrotalcite results in high yields of bio-crude oil (13–28 wt%), without compromising the high heating value (HHV, 26–31 MJ/kg), water content (0.47 wt%) or increasing the content of oxygenated compounds compared to the non-catalytic experiment. For the experimental conditions tested, we observed a global maximum in conversion in the 330 °C and 30 min range. Our findings indicate that the most significant factor on the conversion of EB into bio-crude oil was temperature, followed by the catalyst loading. Furthermore, biochars produced at 330 °C and 30 min show potential as solid biofuels with HHVs up to 28.30 MJ/kg.