1 January 2018 in Construction and Building Materials
1 August 2020 in Construction and Building Materials
19 January 2022 in Road Materials and Pavement Design
Steel slag is the main by-product of steelmaking, and its stacking and burying cause serious pollution to soil and water. Meanwhile, the exploitation of gravel is restricted with the implementation of ecological environment protection, resulting in the lack of nature aggregate. Based on the good engineering properties of steel slag aggregate, many researches attempted to substitute natural aggregate with steel slag applied to concrete. Therefore, this article summarizes the composition and properties of steel slag and discusses the effect of steel slag on properties and microstructure of cement concrete. Extensive literatures verify the feasibility of steel slag substituting part of natural aggregate in concrete. Steel slag affects the workability and volume stability of concrete but improves compressive strength, frost resistance and wear resistance, whereas it is controversial in flexural strength and permeability. Finally, the future research trends of concrete with steel slag aggregate are put forward.
1 November 2022 in Materials Today Communications
17 October 2022 in International Journal of Pavement Research and Technology
16 February 2022 in International Journal of Pavement Engineering
To explore the performance attenuation and mechanism of basalt-fibre-reinforced concrete (BFRC) in cold areas, the changes in the properties of BFRC were discussed under two conditions: the freeze–thaw environment and the coupling of fatigue load and freeze–thaw cycles, and the process of pore deterioration and microcrack propagation was studied quantitatively via mercury intrusion porosimetry and electron image analysis. The results showed that the frost resistance of concrete first improved and then worsened as the basalt fibre length and content increased; the optimum length and content of basalt fibre are 12 mm and 1.96 kg/m3, respectively, based on frost resistance. The performance attenuation of BFRC was lower than that of ordinary concrete under coupling conditions, and the enhancing effect of basalt fibre was more obvious with an increase in the stress level. Basalt fibre alleviated the pore deterioration, and the increase in the amplitude of more harmful pores in BFRC was reduced by 4–5%. The area density and width of cracks were reduced under coupling owing to the anti-cracking effect of the basalt fibre, accompanied by the complication of crack morphology.