The purpose of the current review article is to present a compherensive understanding regarding pros and cons of carbon nanotube–related nanocomposites and to find ways in order to improve the performance of nanocomposites with new designs. Nanomaterials including carbon nanotubes (CNTs) are employed in industrial applications such as supercapacitors, and biosensors, and etc. The present article has been prepared in three main categories. In the first part, carbon nanotube types have been presented, as single-walled carbon nanotubes, multi-walled carbon nanotubes, and also equivalent circuit models, which have been used to more clarify the experimental measurements of impedance. In the second part, nanocomposites with many carbon, inorganic and polymeric materials such as polymer/CNT, activated carbon/CNT, metal oxide/CNT, and carbon fiber/CNT have been investigated in more detail. In the third part, the focus in on the industrial applications of CNTs. including supercapacitors, biosensors, radar absorbing materials, solar cells, and corrosion protection studies. This review article explains the latest advances in carbon nanotubes and their applications in electrochemical, electrical and optical properties of nanocomposites.
1 December 2018 in International Communications in Heat and Mass Transfer
In the current study, different types of thermal barrier coatings with various mass fractions were investigated in terms of oxidation, hot corrosion, and thermal shock resistance. The thermal barrier coatings consisted of six different samples, which included the usual YSZ, Al2O3, hybrid composites with 65 wt.% YSZ and 35 wt.% Al2O3, 50 wt.% YSZ and 50 wt.% Al2O3, 35 wt.% YSZ and 65 wt.% Al2O3 and the final one, which was a double layer composite (Al2O3 and YSZ). High temperature isothermal oxidation behavior of the coatings was tested at 1050 °C, using an air furnace for 48 h, 80 h, and 120 h respectively. Hot corrosion tests were applied at 1050 °C using a 45 wt.% Na2SO4 and 55 wt.% V2O5 mixture of salts. The microstructure and phase stability of coatings were evaluated by means of scanning electron microscopy and X-ray diffraction techniques. The usual YSZ showed better hot corrosion and thermal shock resistance, while Al2O3 showed the lowest hot corrosion and oxidation resistance. Thermally grown oxide formation, thermal expansion coefficient mismatch and phase transformation in the thermal barrier coatings could be the main causes of degradation after thermal shock testing.