13 May 2016 in Geophysics
Multichannel singular spectrum analysis (MSSA) is an effective algorithm for random noise attenuation in seismic data, which decomposes the vector space of the Hankel matrix of the noisy signal into a signal subspace and a noise subspace by truncated singular value decomposition (TSVD). However, this signal subspace actually still contains residual noise. We have derived a new formula of low-rank reduction, which is more powerful in distinguishing between signal and noise compared with the traditional TSVD. By introducing a damping factor into traditional MSSA to dampen the singular values, we have developed a new algorithm for random noise attenuation. We have named our modified MSSA as damped MSSA. The denoising performance is controlled by the damping factor, and our approach reverts to the traditional MSSA approach when the damping factor is sufficiently large. Application of the damped MSSA algorithm on synthetic and field seismic data demonstrates superior performance compared with the conventional MSSA algorithm.
4 April 2016 in Geophysics
The frequency of microseismic data is higher than that of conventional seismic data. The range of effective frequency is usually from 100 to 500 Hz, and low-frequency noise is a common disturbance in downhole monitoring. Conventional signal analysis techniques, such as band-pass filters, have their limitation in microseismic data processing when the useful signals and noise share the same frequency band. We have developed a novel method to suppress low-frequency noise in microseismic data based on mathematical morphology theory that aims at distinguishing useful signals and noise according to their tiny differences of waveform. By choosing suitable structure elements, we have extracted low-frequency noise from a original data set. We first developed the fundamental principle of mathematical morphology and the formulation of our approach. Then, we used a synthetic data example that was composed of a Ricker wavelet and low-frequency noise to test the feasibility and performance of the proposed approach. Our results from the synthetic example indicate that the proposed approach can effectively suppress large-scale low-frequency noise while slightly decreasing the small-scale signals. Finally, we have applied the proposed approach to field microseismic data and obtained very encouraging results.
1 November 2017 in Geophysics
Linear coherent noise attenuation is a troublesome problem in a variety of seismic exploration areas. Traditional methods often use the differences in frequency, wavenumber, or amplitude to separate the useful signal and coherent noise. However, the application of traditional methods is limited or even invalid when the aforementioned differences between useful signal and coherent noise are too small to be distinguished. For this reason, we have managed to develop a new algorithm from the differences in the shape of seismic waves, and thus, introduce mathematical morphological filtering (MMF) into coherent noise attenuation. The morphological operation is calculated in the trace direction of a rotating coordinate system. This rotating coordinate system is along the direction of the trajectory of coherent noise to make the energy of the coherent noise distributed along the horizontal direction. The MMF approach is more effective than mean and median filters in rejecting abnormal values and causes fewer artifacts compared with - filtering. Our technique requires that coherent noise can be picked successfully. Application of our technique on synthetic and field seismic data demonstrates its successful performance.
1 January 2018 in Geophysics
Improving the signal-to-noise ratio (S/N) of seismic data is desirable in many seismic exploration areas. The attenuation of random noise can help to improve the S/N. Geophysicists usually use the differences between signal and random noise in certain attributes, such as frequency, wavenumber, or correlation, to suppress random noise. However, in some cases, these differences are too small to be distinguished. We used the difference in planar morphological scales between signal and random noise to separate them. The planar morphological scale is the information that describes the regional shape of seismic waveforms. The attenuation of random noise is achieved by removing the energy in the smaller morphological scales. We call our method planar mathematical morphological filtering (PMMF). We analyze the relationship between the performance of PMMF and its input parameters in detail. Applications of the PMMF method to synthetic and field post/prestack seismic data demonstrate good performance compared with competing alternative techniques.
11 July 2014 in Petroleum Science
21 November 2018 in Geophysical Journal International