We report a spray deposition technique for patterning liquid metal alloys to form stretchable conductors, which can then be encapsulated in silicone elastomers via the same spraying procedure. While spraying has been used previously to deposit many materials, including liquid metals, this work focuses on quantifying the spraying process and combining it with silicones. Spraying generates liquid metal microparticles (~5 μm diameter) that pass through openings in a stencil to produce traces with high resolution (~300 µm resolution using stencils from a craft cutter) on a substrate. The spraying produces sufficient kinetic energy (~14 m/s) to distort the particles on impact, which allows them to merge together. This merging process depends on both particle size and velocity. Particles of similar size do not merge when cast as a film. Likewise, smaller particles (<1 µm) moving at the same speed do not rupture on impact either, though calculations suggest that such particles could rupture at higher velocities. The liquid metal features can be encased by spraying uncured silicone elastomer from a volatile solvent to form a conformal coating that does not disrupt the liquid metal features during spraying. Alternating layers of liquid metal and elastomer may be patterned sequentially to build multilayer devices, such as soft and stretchable sensors.
25 November 2020 in ACS Applied Materials & Interfaces
We demonstrate a single-feed planar antenna capable of independently reconfiguring its operating frequency, radiation pattern and polarization using stretchable, encapsulated liquid metal parasitic elements. The liquid metal is contained within elastomeric fibers that can be mechanically translated, stretched or relaxed to alter the position or length of each conducting element on a 2D surface, physically reshaping the metal on the antenna aperture. This eliminates several practical challenges associated with fluidic actuation of liquid metal and makes the actuation scheme much faster and more reliable than other recent approaches. Using this scheme, the reshapable aperture (RESHAPE) design supports continuously reconfigurable operating frequencies from 2.45 GHz to 6.5 GHz, while supporting either linear ŷ and ẑ polarizations. At the same time, the radiation pattern can also be reconfigured in all planes, over a continuous range, to a maximum of ±45° away from the broadside direction for most frequencies. For all these possible states, the antenna maintains a 2:1 VSWR and a total efficiency of >60%. We explain the operation of the design at several frequencies, analyze the coverage area, and present measurements of a fabricated prototype.
4 January 2023 in ACS Applied Materials & Interfaces