27 August 2020 in IEEE Access
Semiconductor power modules are core components of power electronics in electrified vehicles. Packaging technology often has a critical impact on module performance and reliability. This paper presents a comprehensive review of the automotive power module packaging technologies. The first part of this paper discusses the driving factors of packaging technology development. In the second section, the design considerations and a primary design process of module packaging are summarized. Besides, major packaging components, such as semiconductor dies, substrates, and die bonding, are introduced based on the conventional packaging structure. Next, technical details and innovative features of state-of-the-art automotive power modules from major suppliers and original equipment manufacturers are reviewed. Most of these modules have been applied in commercial vehicles. In the fourth part, the system integration concept, printed circuit board embedded packaging, three-dimensional packaging, press pack packaging, and advanced materials are categorized as promising trends for automotive applications. The advantages and drawbacks of these trends are discussed, and it is concluded that a preferable overall performance could be achieved by combining multiple technologies.
31 January 2022 in IEEE Transactions on Transportation Electrification
The design of the thermal management solution has a significant impact on the reliability and power density of power electronics (PEs). As the electric vehicle (EV) industry moves toward increasing the efficiency and output power, the cooling system must effectively remove the excess heat dissipated in PEs. The main heat-generating components are the semiconductor switches, but other components, such as bus bars and power capacitors, also dissipate heat and require cooling. Currently, indirect, direct, and double-sided cooling methods are the most common in EVs and account for 14%–33% of the total volume of traction inverters. However, PE packaging sizes are expected to decrease, while the heat dissipation continues to increase; hence, advanced cooling technologies are being investigated. This article aims to review the thermal management strategies for major PE components in EVs as well as their failure modes since high temperatures can be detrimental to the performance of PEs. Cooling designs that are currently implemented in EVs and future cooling trends for the next generation of PEs are reviewed as well.
17 July 2023 in IEEE Transactions on Transportation Electrification
Aviation electrification has been in the spotlight over the last decade, expected to lead to a more sustainable future. As the power demand and the voltage level of onboard electric power systems dramatically increase, multilevel inverters have attracted the attention of the aviation industry for their superior performance. This paper reviews multilevel inverters for electric aircraft applications. The functions of multilevel inverters in different subsystems of electric aircraft are summarized. The advantages of multilevel inverters compared with their two-level counterparts in electric aircraft, in terms of efficiency, power density, reliability, costs, and power quality, are evaluated through literature review and case studies. Technical innovations with respect to the design, control, modulation, and prototyping of multilevel inverters for aviation applications are also introduced. Finally, future trends of multilevel inverters for electric aircraft applications are discussed.
8 November 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
With the application of wide-bandgap devices, the packaging technology of power modules is faced with elevated challenges. This article proposes a new packaging concept for silicon carbide (SiC) power modules. The main objective is to improve the lifetime and temperature range, while the proposed packaging also has the potential to reduce stray inductance and simplify the fabrication process. In the proposed concept, sintered nano-silver is selected as the die bonding. The conventional direct-bonded copper substrate is replaced by a molybdenum layer and a bismaleimide triazine resin layer which has a low thermal expansion coefficient. A steady-state thermal–mechanical analysis is conducted to verify the material selection. Furthermore, a transient thermal–mechanical analysis based on Joint Electron Device Engineering Council (JEDEC) temperature cycling methods is carried out, whose results are applied in the Coffin–Manson lifetime model to evaluate the advantages of the proposed silver-sintered molybdenum packaging. The results demonstrated that the proposed packaging technology could improve the lifetime by over 1000 times and increase the maximum operating temperature by nearly three times. Finally, a feasible process of sintering SiC chips on molybdenum substrates is proposed, which achieves a uniform and low porosity bonding.