21 August 2023 in Construction and Building Materials
1 January 2010 in Bridge Structures
This paper reviews international practice in the inspection of bridges, and looks at the NDE of post-tensioned concrete and of masonry arch bridges. Key continental European practice is compared with the UK and the USA. Given the wide range of langua
31 October 2024 in Construction and Building Materials
1 September 2018 in Construction and Building Materials
1 August 2001 in Journal of Bridge Engineering
As part of an ongoing program into the noninvasive geometrical characterization of masonry arch bridges, a laboratory study of radar propagation through masonry has been undertaken. A 2.4 m long × 1 m wide × 1.5 m high experimental test rig was built in the laboratory with brick walls on three sides and a wooden gate on the fourth narrow side. The objective was to construct a composite test rig that would replicate certain of the environments that ground-penetrating radar might encounter when being used to test a masonry arch bridge. Tests were undertaken using 500, 900, and 1,000 MHz bow-tie antennas with the masonry box filled with fresh water and then saline water with different concentrations of sodium chloride. Further tests were undertaken with the masonry box filled with dry sand and wet sand. Finally the test rig was modified to simulate a composite masonry structure and tests were performed both on the hollow- and sand-filled models. The results from this work are reported herein indicating the reliability and ease of identifying various targets. It was found that radar signals were severely attenuated when the saline concentration exceeded 0.05% by mass. Better penetration of the radar signals was obtained when the masonry box was filled with dry sand rather than wet sand. In the case of the hollow cellular masonry structure, refraction effects were more evident.
27 January 2015 in MATEC Web of Conferences
Evaluating railway vehicle speed is an important task for both railway operators and researchers working in the area of vehicle/track dynamics, noise and vibration assessment. The objective of this paper is to present a new technique capable of automatically calculating train speed from vibration sensors placed at short or long distances from the track structure. The procedure combines three separate signal processing techniques to provide high precision speed estimates. In order to present a complete validation, the robustness of the proposed method is evaluate using synthetic railway vibration time histories generated using a previously validated vibration numerical model. A series of simulations are performed, analysing the effect of vehicle speed, singular wheel and rail surface defects, and soil configuration. Virtual conditions of measurement are also examined, taking into account external sources other than trains, and sensor response. It is concluded that the proposed method offers high performance for several train/track/soil arrangements. It is also used to predict train speeds during field trials performed on operational railway lines in Belgium and in UK.