31 March 2024 in Journal of Energy Systems
Trigeneration plants (TGP) desired for combined production of electricity, heat and refrigeration are highly flexible to follow current loading. But their highest efficiency might be possible only when heat production coincides with its consumption, which is generally impossible in traditional TGP with applying the absorption lithium-bromide chiller (ACh) converting the heat, released from combustion engine in the form of hot water, into refrigeration. Usually, the excessive heat of hot water, not consumed by ACh, is removed to the atmosphere through emergency radiator. However, the well-known methods of TGP efficiency assessment do not consider those heat losses and give the overestimated magnitudes of efficiency for conventional TGP with ACh. The application of booster ejector chiller (ECh), as an example, for utilization of the residual waste heat, remained from ACh and evaluated about 25%, has been proposed to produce supplementary refrigeration for cooling cyclic air of driving combustion engine to increase its electrical efficiency by 3-4 %. In the case of using the supplementary refrigeration for technological or other needs the heat efficiency of TGP will increase to about 0.43 against 0.37 for typical TGP with ACh as example. The new modified criteria to assess a real efficiency of conventional TGP, based on ACh, are proposed which enable to reveal the way of its improvement through minimizing the heat waste. Such combined two-stage waste heat recovery system of TGP can be considered as the alternative to the use of back-up gas boiler to pick up the waste heat potential for conversion by ACh to meet increased refrigeration needs.
26 February 2021 in Aerospace technic and technology
The paper shows and analyzes circuit solutions for improving the existing schemes of ejector heat-using refrigeration machines, which are used as part of cogeneration plants. One of the promising areas is the use of an aerothermopressor, which implements the effect of thermogasdynamic compression, which is to increase the pressure while reducing the temperature in the evaporation of liquid, which injected into the flow of vapor moving at speed near the sound. To analyze the efficiency of ejector refrigeration machines, the developed calculation model was used, which takes into account the use of an aerothermopressor in the cycles of refrigeration machines with the features of the calculations of cycles and circuits. To select and determine possible circuit solutions, the efficiency of an aerothermopressor for different refrigerants was evaluated and a comparative analysis of the characteristic parameters of the efficiency of an aerothermopressor in the range of cooling temperature differences is 20–100 oC was made. It is possible to increase the efficiency of ejector heat-using refrigeration machines when using an aerothermopressor by providing a temperature difference of 60–100 oC. The analysis showed that the most important are: R717, R134a, R227ea, R1234ze (E), R1234yf (2–4%). It is possible to provide a higher thermal coefficient for ejector heat-using refrigeration machines by using an aerothermopressor in the circuit using the circulation of liquid refrigerant. The corresponding increase in the thermal coefficient is 1.5–2.0%. The use of an aerothermopressor in the scheme with heat recovery allows removing additional overheating of vapor before suctioning into the ejector with a corresponding increase in the thermal coefficient by 4-8%. The analysis shows that the total increase in the thermal coefficient due to the combined use of an aerothermopressor, heat recovery, and recirculation is 10–15% at a base value of 0.30–0.40.