21 July 2023 in IEEE Antennas and Wireless Propagation Letters
This article proposes a novel dual-polarized in-band full-duplex antenna with good interport isolation for the 2.4 GHz WLAN application. The proposed antenna consists of a co-radiating patch, which is excited orthogonally with differential feed using the meander slotline balun and normal feed. The meander slotline balun provides differential feed, equal and opposite driving currents, to the patch and effectively suppresses the leakage of surface currents to the other port. Similarly, the leaked in-phase surface currents from the other port generate countering fields in the balun and the interference of countering fields results in neutral coupling. The meander slotline balun, due to its characteristics, improves the interport isolation of the antenna. The proposed antenna provides a minimum of 64 dB interport isolation in the (2.4-2.5) GHz band with significantly low cross-polarization. The prototype of the proposed antenna is fabricated and tested in the anechoic chamber. The simulation and measured results of the prototype show a reasonable correlation, and the far-field measurement shows that the antenna delivers the broadside radiation in both planes with a low cross-polar of less than -35 dB at the 2.45 GHz resonant frequency. The designed meandered slotline balun offers trivial magnitude and phase imbalances of (0.04-0.06) dB and $\boldsymbol{\pm{\bf 2}^0}$, respectively.
5 August 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
This paper offers a compact, tightly-coupled, self-decoupled vias-based multiple-input multiple-output (MIMO) antenna pair with a common ground for a 5G system. The projected design comprises modified T-shaped tightly-coupled antenna elements. It is effortlessly helping to achieve sound decoupling across the desired band without using any extra decoupling circuit between the elements. It is revealed that the structure of the self-decoupled MIMO antenna tunes the inductive and capacitive (hybrid) effect of elements, which helps to achieve the decoupling of antenna elements. A relevant equivalent circuit model for coupled and decoupled MIMO antenna is proposed to validate the insight operation of this proposed theory. The hybrid tuning among the MIMO antenna elements reduces the coupling effect mutually by modifying the antenna shapes. The proposed self-decoupled MIMO antenna pair demonstrates low mutual coupling across the 5G NR frequency bands: n48 and long-term evolution (LTE) band 42/52 (3.2-3.6 GHz) with good diversity characteristics. Moreover, the one proposed design structure can offer dual-band self-decoupling features. The proposed structure provides 3.2-3.6GHz and 3.95-4.115GHz frequency bands. This structure can be optimize further to achieve dual-band/ wideband resonance in the design.
15 April 2022 in IEEE Canadian Journal of Electrical and Computer Engineering
This article presents a new fourth-order stub-based decoupling circuit for isolation improvement in a wideband tightly coupled multiple-input–multiple-output (MIMO) antenna array. The proposed decoupling circuit uses a fourth-order coupling-resonator filter effect and is designed using the structure’s admittance parameter. In the decoupling circuit, the pair of dual-band second-order stub-based filters is used for the desired band’s lower and upper frequencies. Finite transmission zeros provide cross-coupling, which helps maintain the admittance slope stopband between these bands and reduces coupling among MIMO elements. The proposed fourth-order decoupling circuit concept can be utilized for different wideband MIMO antenna applications to redesign the targeted band and cross-coupling scenario properly. In addition, to demonstrate the proposed decoupling circuit concept’s influence in achieving good wideband isolation in a compact dimension of $45\times 40\times1.6$ mm 3 , octagonal- and circular-shaped patch MIMO antennas are analyzed. To analyze the impact of the proposed decoupling circuit of the dimension $11.3\times11$ mm 2 in the design, edge-to-edge separation between MIMO elements is kept at a minimum of 0.2 mm ( $0.0035\lambda _{0 \thinspace }$ at 5.4 GHz, WLAN band). This demonstrates that the decoupling circuits are antenna-independent and can be applied to other MIMO antennas. The measured S-parameters of the proposed wideband MIMO antenna present high isolation (>20 dB) between the antenna elements. Moreover, the proposed solutions’ radiation behavior and diversity performance are evaluated. The MIMO antenna element measured radiation efficiency is increased from 50% to 75%. It demonstrates good properties that make it a suitable contender for advanced scientific applications.
28 September 2024 in Microwave and Optical Technology Letters