2 January 2020 in Applied Physics Letters
The implantation of aluminum into 4H-SiC is studied using secondary ion mass spectrometry. In particular, two-dimensional concentration profiles are obtained, which allow the investigation of lateral straggling and its dependence on the crystallographic orientation. A high dose, medium energy aluminum implantation is studied in great detail. It shows an asymmetric distribution due to the -off axis growth of the epitaxial layer. The lateral straggling is found to be in the range of several micrometers for a concentration of , which is contrary to the expectation given by most simulation studies. Implantations performed at different orientations support the idea that lateral straggling highly depends on the particular channeling opening.
1 October 2020 in IEEE Transactions on Electron Devices
8 December 2020 in IEEE Transactions on Electron Devices
The silicon carbide (SiC) power MOSFET is a promising solution for power electronics applications demanding high energy efficiency and high power density. For high-current applications, typically several transistors are operated in parallel, requiring synchronous switching. Commercial SiC power MOSFETs may, however, still show a significant performance spread in turn-on electrical behavior and, hence, lifetime in such a system. Based on a calibrated TCAD model of a commercial 1.2-kV SiC MOSFET, the impact of variations on the critical processing steps is evaluated. Controlling the epitaxial doping concentration as well as the interface trap density is most important for a low device-to-device variability. Furthermore, it is shown that the improvement of the output performance due to an increasing channel mobility quickly saturates.
21 April 2021 in Semiconductor Science and Technology
Phosphorus implantation is essential to create localized n-type doped regions in 4H-SiC. The realized profiles may, however, deviate from the desired ones, affecting device properties. In order to characterize typical process parameters and to enable correct prediction of the desired structures, phosphorous implantation into 4H-SiC with a variety of doses and energies is performed at room and elevated temperature. Exemplary post-implantation annealing shows no significant influence on the phosphorus distribution. The as-implanted profiles, analyzed by secondary ion mass spectrometry, show a clear dependence on implantation dose and temperature. High sample temperature at implantation suppresses channeling in case of low and medium doses due to increased lattice vibrations, while crystal damage is restored in case of high doses leading to increased opportunities for channeling, pointing toward different crystal damage and energy loss mechanisms. Finally, the Monte Carlo profiles of the simulation tools stopping and range of ions in matter (SRIM) and Sentaurus Process are critically compared with the experimental profiles.